RE: Re: Re: plextor px-708uf: cannot get disk type
Sorry if this is a repeat; my SMTP service is having some problems...
> -----Original Message-----
> From: Thomas J Magliery PhD [mailto:magliery@csb.yale.edu]
> Sent: Monday, January 26, 2004 6:21 PM
> To: schilling@fokus.fraunhofer.de
> Cc: cdwrite@other.debian.org; lourens@rainbowdesert.net
> Subject: Re: Re: Re: plextor px-708uf: cannot get disk type
>
> Joerg, I removed magicdev (rpm -e magicdev) and I *still* got this
> error. (Lourens, I also saw this on Google; thanks for the suggestion.)
> I removed the file Autorun.desktop from .kde/autostart and this
> stopped the kernel/module message. (I probably should have mentioned I
> use KDE, not GNOME.)
>
> Anyway, here is the bad news. After all that, I still get the following:
>
> ====================
> [root@reganlinux magliery]# dvdrecord -atip dev=0,0,0
> dvdrtools v0.1.3
> Portions (c) 2002 Red Hat, Inc.
> Based on:
> Cdrecord 1.11a15 (i386-redhat-linux-gnu) Copyright (C) 1995-2001 Jörg
> Schilling
> scsidev: '0,0,0'
> scsibus: 0 target: 0 lun: 0
> Linux sg driver version: 3.1.24
> Using libscg version 'schily-0.5'
> dvdrecord: Warning: using inofficial libscg transport code version
> (schily-RH-scsi-linux-sg.c-1.69-RH-O_EXCL '@(#)scsi-linux-sg.c
> 1.69 02/01/18 Copyright 1997 J. Schilling').
> Device type : Removable CD-ROM
> Version : 2
> Response Format: 1
> Vendor_info : 'PLEXTOR '
> Identifikation : 'DVDR PX-708A '
> Revision : '1.04'
> Device seems to be: Generic mmc2 DVD.
> dvdrecord: Input/output error. get configuration: scsi sendcmd: no error
> CDB: 46 00 00 21 00 00 00 01 00 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00
> Sense Key: 0x0 No Additional Sense, Segment 0
> Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
> Sense flags: Blk 0 (not valid)
> cmd finished after 0.001s timeout 40s
> Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
> Driver flags : SWABAUDIO BURNFREE
> Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P
> RAW/R96R
> dvdrecord: Input/output error. read disk info: scsi sendcmd: no error
> CDB: 51 00 00 00 00 00 00 00 24 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00
> Sense Key: 0x0 No Additional Sense, Segment 0
> Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
> Sense flags: Blk 0 (not valid)
> cmd finished after 0.002s timeout 240s
> dvdrecord: Cannot get disk type.
> =============================
>
> Apparently, the KDE automounter was not the (only) problem. Now what...?
>
> Tom
>
Reply to: