Re: Sony DRU-510A, cannot burn dvd's on Solaris9 x386
>From: Carl Bonvini <carl.bonvini@ps.inficon.com>
>OS: Solaris 9, x386
>cdrecord version: cd-record-prodvd-2.01a12-i386-pc-solaris2.9
>DVD Model: Sony DRU-510A
>I have successfull burnt a CD (using CD media) with the following with the
>following command;
> cdrecord -V dev=1,0,0 speed=2 driveropts=burnfree
>/var/system/file.iso
>When I try to burn a DVD (using DVD-R media this is the results I get ...
>cdrecord -V dev=1,0,0 speed=2 driveropts=burnfree /var/system/win32ahc.iso
>Cdrecord-ProDVD-Clone 2.01a12 (i386-pc-solaris2.9) Copyright (C) 1995-2003
>Jörg
>Schilling
>Unlocked features: ProDVD Clone
>Limited features:
>This copy of cdrecord is licensed for:
>private/research/educational_non-commerci
>al_use
>scsidev: '1,0,0'
>scsibus: 1 target: 0 lun: 0
>Warning: Using USCSI interface.
>Using libscg version 'schily-0.7'
>Device type : Removable CD-ROM
>Version : 0
>Response Format: 2
>Capabilities :
>Vendor_info : 'SONY '
>Identifikation : 'DVD RW DRU-510A '
>Revision : '1.0a'
>Device seems to be: Generic mmc2 DVD-R/DVD-RW.
>Using generic SCSI-3/mmc-2 DVD-R/DVD-RW driver (mmc_dvd).
>Driver flags : DVD MMC-3 SWABAUDIO BURNFREE
>Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
>Starting to write CD/DVD at speed 2 in real TAO mode for single session.
>Last chance to quit, starting real write 0 seconds. Operation starts.
>cdrecord: I/O error. write_g1: scsi sendcmd: no error
>CDB: 2A 00 00 00 08 B8 00 00 1F 00
>status: 0x2 (CHECK CONDITION)
>Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 21 02 00 C0 00 02
>Sense Key: 0x5 Illegal Request, Segment 0
>Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0
>Sense flags: Blk 0 (not valid) error refers to command part, bit ptr 0 (not
>vali
>d) field ptr 2
>resid: 63488
>cmd finished after 0.007s timeout 100s
>write track data: error after 4571136 bytes
>cdrecord: The current problem looks like a buffer underrun.
>cdrecord: It looks like 'driveropts=burnfree' does not work for this drive.
>cdrecord: Please report.
>cdrecord: Make sure that you are root, enable DMA and check your HW/OS set
>up.
Maybe your drive does not support burnfree with DVDs.
Note that some drives return this type of error condition when the drive
does not like the medium.
Jörg
--
EMail:joerg@schily.isdn.cs.tu-berlin.de (home) Jörg Schilling D-13353 Berlin
js@cs.tu-berlin.de (uni) If you don't have iso-8859-1
schilling@fokus.fraunhofer.de (work) chars I am J"org Schilling
URL: http://www.fokus.fraunhofer.de/usr/schilling ftp://ftp.berlios.de/pub/schily
Reply to: