Sony DRU-510A, cannot burn dvd's on Solaris9 x386
OS: Solaris 9, x386
cdrecord version: cd-record-prodvd-2.01a12-i386-pc-solaris2.9
DVD Model: Sony DRU-510A
I have successfull burnt a CD (using CD media) with the following with the
following command;
cdrecord -V dev=1,0,0 speed=2 driveropts=burnfree
/var/system/file.iso
When I try to burn a DVD (using DVD-R media this is the results I get ...
cdrecord -V dev=1,0,0 speed=2 driveropts=burnfree /var/system/win32ahc.iso
Cdrecord-ProDVD-Clone 2.01a12 (i386-pc-solaris2.9) Copyright (C) 1995-2003
Jörg
Schilling
Unlocked features: ProDVD Clone
Limited features:
This copy of cdrecord is licensed for:
private/research/educational_non-commerci
al_use
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Warning: Using USCSI interface.
Using libscg version 'schily-0.7'
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'SONY '
Identifikation : 'DVD RW DRU-510A '
Revision : '1.0a'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Using generic SCSI-3/mmc-2 DVD-R/DVD-RW driver (mmc_dvd).
Driver flags : DVD MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
Starting to write CD/DVD at speed 2 in real TAO mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
cdrecord: I/O error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 08 B8 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 21 02 00 C0 00 02
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0
Sense flags: Blk 0 (not valid) error refers to command part, bit ptr 0 (not
vali
d) field ptr 2
resid: 63488
cmd finished after 0.007s timeout 100s
write track data: error after 4571136 bytes
cdrecord: The current problem looks like a buffer underrun.
cdrecord: It looks like 'driveropts=burnfree' does not work for this drive.
cdrecord: Please report.
cdrecord: Make sure that you are root, enable DMA and check your HW/OS set
up.
cdrecord: I/O error. test unit ready: scsi sendcmd: no error
CDB: 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 12 00 00 00 00 04 08 00 00 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x08 (logical unit not ready, long write in progress)
Fru
0x0
Sense flags: Blk 0 (not valid)
cmd finished after 50.004s timeout 100s
Could someone help me out here? I feel so close to success.
cbonvini@pc.inficon.com
Reply to: