NEC3500 and Linux
hi,
i have a trouble with my nec3500 and linux, i cant get speed > 6X , and
every DVD is detected with a 6X speed. Im using sarge with latest
cdrecord-prodvd , here the show:
al_use
TOC Type: 1 = CD-ROM
scsidev: '0,3,0'
scsibus: 0 target: 3 lun: 0
Linux sg driver version: 3.1.25
Using libscg version 'schily-0.8'.
Driveropts: 'burnproof'
SCSI buffer size: 64512
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : '_NEC '
Identifikation : 'DVD_RW ND-3500AG'
Revision : '2.18'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: DVD-R sequential recording
Profile: Unknown
Profile: DVD+R
Profile: DVD+RW
Profile: DVD-RW sequential overwrite
Profile: DVD-RW restricted overwrite
Profile: DVD-R sequential recording (current)
Profile: DVD-ROM
Profile: CD-RW
Profile: CD-R
Profile: CD-ROM
Using generic SCSI-3/mmc-2 DVD-R/DVD-RW driver (mmc_dvd).
Driver flags : DVD MMC-3 SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1769472 = 1728 KB
FIFO size : 23068672 = 22528 KB
Track 01: data 4335 MB
Total size: 4335 MB = 2219822 sectors
Current Secsize: 2048
Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 78674
Starting to write CD/DVD at speed 6 in real SAO mode for single session.
Last chance to quit, starting real write in 9 seconds.
BURN-Free was not used.
cdrecord-ProDVD: fifo had 118 puts and 0 gets.
cdrecord-ProDVD: fifo was 0 times empty and 0 times full, min fill was 0%.
here you can see dvd is detected to 6X and happen with ALL DVDS; too 4x dvds
or 8x dvds
any help, is welcomed,
greets
enito
Reply to: