Re: cdrecord fails with SCSI burner
>From: Volker Kuhlmann <hidden@paradise.net.nz>
>Command: ./cdrecord -v dev=0,5,0 speed=24 -pad padsize=10x75s -data -dummy cd1.iso
>================================================================================
>./cdrecord: No write mode specified.
>./cdrecord: Asuming -tao mode.
>./cdrecord: Future versions of cdrecord may have different drive dependent defaults.
>./cdrecord: Continuing in 5 seconds...
>scsidev: '0,5,0'
>scsibus: 0 target: 5 lun: 0
>Linux sg driver version: 3.5.30
>SCSI buffer size: 64512
>Cdrecord-Clone 2.01a34 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
>TOC Type: 1 = CD-ROM
>Using libscg version 'schily-0.8'.
>atapi: 0
>Device type : Removable WORM
>Version : 1
>Response Format: 2
>Capabilities :
>Vendor_info : 'KODAK '
>Identifikation : 'PCD225 '
>Revision : '1.07'
>Device seems to be: Philips CDD-522.
>Using driver for Philips CDD-522 (philips_cdd522).
>Driver flags :
>Supported modes: TAO
>FIFO size : 4194304 = 4096 KB
>./cdrecord: Warning: blockdesc secsize 2048 differs from cap secsize 0
This may be normal, IIRC the drive returns a cap secsize of 0 for an empty
medium.
>./cdrecord: Warning: controller returns zero sized Speed/Dummy information page.
>./cdrecord: Warning: controller returns wrong size for Speed/Dummy information page.
>./cdrecord: Warning: controller returns wrong page 0 for Speed/Dummy information page (23).
>./cdrecord: Cannot init drive.
I would need the part of the cdrecord -V trace that refers to the warnings.
This should start with a SCSI MODE SENSE command...
Jörg
--
EMail:joerg@schily.isdn.cs.tu-berlin.de (home) Jörg Schilling D-13353 Berlin
js@cs.tu-berlin.de (uni) If you don't have iso-8859-1
schilling@fokus.fraunhofer.de (work) chars I am J"org Schilling
URL: http://www.fokus.fraunhofer.de/usr/schilling ftp://ftp.berlios.de/pub/schily
Reply to: