[Support] problems burning under win32 on LG GCE 8580B
Hello,
I'm facing problems for recording Taiyo Yuden media on LG GCE-8580B
recorders.
Sometimes the record failed and sometimes not.
Here is the log file, any idea will be appreciated.
Thanks for your help
scsidev: '2,0,0'
scsibus: 2 target: 0 lun: 0
Cdrecord 2.0 (i686-pc-cygwin) Copyright (C) 1995-2002 Jörg Schilling
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.7'
Driveropts: 'burnproof'
atapi: -1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'CD-RW GCE-8520B '
Revision : '1.00'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : MMC-2 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1467136 = 1432 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 28 MB
Total size: 33 MB (03:16.18) = 14714 sectors
Lout start: 33 MB (03:18/14) = 14714 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 4
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, high Beta category (A+) (3)
ATIP start of lead in: -11849 (97:24/01)
ATIP start of lead out: 359847 (79:59/72)
Disk type: Long strategy type (Cyanine, AZO or similar)
Manuf. index: 25
Manufacturer: Taiyo Yuden Company Limited
Blocks total: 359847 Blocks current: 359847 Blocks remaining: 345133
Starting to write CD/DVD at speed 48 in real SAO mode for single session.
Last chance to quit, starting real write in 9 seconds. 8
seconds
7 seconds. 6 seconds. 5 seconds.
4 seconds. 3 seconds. 2 seconds.
1 seconds. 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is ON.
Performing OPC...
Sending CUE sheet...
cdrecord: WARNING: Drive returns wrong startsec (0) using -150
Writing pregap for track 1 at -150
Starting new track at sector: 0
Track 01: 0 of 28 MB written.
Track 01: 1 of 28 MB written (fifo 100%) [buf 98%] 0.6x.
Track 01: 2 of 28 MB written (fifo 100%) [buf 99%] 21.5x.
Track 01: 3 of 28 MB written (fifo 100%) [buf 99%] 22.1x.cdrecord: I/O e
ror. write_g1: scsi sendcmd: retryable error
CDB: 2A 00 00 00 06 4C 00 00 1F 00
status: 0x0 (GOOD STATUS)
cmd finished after 0.033s timeout 200s
Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
write track data: error after 3301376 bytes
Writing time: 21.874s
Average write speed 11.5x.
Min drive buffer fill was 99%
Fixating...
Fixating time: 3.193s
cdrecord: fifo had 116 puts and 53 gets.
cdrecord: fifo was 0 times empty and 43 times full, min fill was 95%.
BURN-Free was 1 times used.
Thierry PARET
Reply to: