Bug#604676: linux-2.6: include fix for aluminium powerbooks keyboards
Package: linux-2.6
Version: 2.6.32-27
Severity: wishlist
Hey,
I recently booted my powerbook and fully upgraded to Squeeze. I noted that
the (quite old) proble, of the inverted @#/<> was back in X (while it works
fine on console).
There was an xkb option supposed to fix that (apple:badmap), but it has
been dropped from xkeyboard-configuration because a correct had been
committed to the kernel.
The commit seems to be 54a6593d65e638ad7e1e8cc986159d76054dab4b and is not
included in Squeeze kernel. I've opened a bug against xkb-data (#604671) to
revert the fix until the Debian kernel includes the patch but it'd be nice
to include it for Squeeze (though I could understand it's not a priority).
Thanks in advance,
--
Yves-Alexis
-- Package-specific info:
** Version:
Linux version 2.6.32-5-powerpc (Debian 2.6.32-27) (maks@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 Sat Oct 30 23:26:42 UTC 2010
** Command line:
root=/dev/hda2 ro vga=0x317 quiet
** Not tainted
** Kernel log:
[ 10.163771] udev[221]: starting version 164
[ 11.547930] cfg80211: Using static regulatory domain info
[ 11.547936] cfg80211: Regulatory domain: US
[ 11.547939] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 11.547945] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 11.547949] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 11.547954] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 11.547959] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 11.547964] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 11.547969] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 11.548690] cfg80211: Calling CRDA for country: US
[ 11.590197] usb 2-1: USB disconnect, address 2
[ 11.593324] usb 2-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -108
[ 11.706290] input: appletouch as /devices/pci0001:10/0001:10:1a.0/usb2/2-2/2-2:1.1/input/input6
[ 11.706596] usbcore: registered new interface driver appletouch
[ 11.956042] usb 2-1: new full speed USB device using ohci_hcd and address 4
[ 12.229645] yenta_cardbus 0001:10:13.0: CardBus bridge found [0000:0000]
[ 12.229667] yenta_cardbus 0001:10:13.0: Enabling burst memory read transactions
[ 12.229673] yenta_cardbus 0001:10:13.0: Using CSCINT to route CSC interrupts to PCI
[ 12.229678] yenta_cardbus 0001:10:13.0: Routing CardBus interrupts to PCI
[ 12.229685] yenta_cardbus 0001:10:13.0: TI: mfunc 0x00001002, devctl 0x60
[ 12.238089] usb 2-1: New USB device found, idVendor=05ac, idProduct=8205
[ 12.238097] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 12.238291] usb 2-1: configuration #1 chosen from 1 choice
[ 12.332083] yenta_cardbus 0001:10:13.0: ISA IRQ mask 0x0000, PCI irq 53
[ 12.332091] yenta_cardbus 0001:10:13.0: Socket status: 30000007
[ 12.332106] yenta_cardbus 0001:10:13.0: pcmcia: parent PCI bridge I/O window: 0x0 - 0x7fffff
[ 12.332113] yenta_cardbus 0001:10:13.0: pcmcia: parent PCI bridge Memory window: 0xf3000000 - 0xf3ffffff
[ 12.332119] yenta_cardbus 0001:10:13.0: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0xafffffff
[ 12.445727] irq: irq 57 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 57
[ 12.445768] irq: irq 58 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 58
[ 12.458366] ams: Found I2C based motion sensor
[ 12.632406] Bluetooth: Core ver 2.15
[ 12.632526] NET: Registered protocol family 31
[ 12.632529] Bluetooth: HCI device and connection manager initialized
[ 12.632535] Bluetooth: HCI socket layer initialized
[ 12.768597] b43-phy0: Broadcom 4306 WLAN found (core revision 5)
[ 12.771691] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 12.772241] usbcore: registered new interface driver btusb
[ 12.927820] phy0: Selected rate control algorithm 'minstrel'
[ 12.928861] Registered led device: b43-phy0::tx
[ 12.928886] Registered led device: b43-phy0::rx
[ 12.928910] Registered led device: b43-phy0::radio
[ 12.929040] Broadcom 43xx driver loaded [ Features: PMLS, Firmware-ID: FW13 ]
[ 12.955513] irq: irq 30 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 30
[ 12.955548] irq: irq 1 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 21
[ 12.955565] irq: irq 2 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 27
[ 13.026357] snd-aoa-fabric-layout: Using PMF GPIOs
[ 13.057945] snd-aoa-codec-tas: found tas3004
[ 13.058683] snd-aoa-fabric-layout: can use this codec
[ 13.123328] irq: irq 61 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 61
[ 13.123365] snd-aoa-codec-tas: tas found, addr 0x35 on /pci@f2000000/mac-io@17/i2c@18000/i2c-bus@0/codec@6a
[ 15.383250] Adding 499992k swap on /dev/hda4. Priority:-1 extents:1 across:499992k
[ 171.805170] EXT3 FS on hda2, internal journal
[ 172.204572] i2c /dev entries driver
[ 172.282951] SCSI subsystem initialized
[ 172.337722] adt746x: version 1 (supported)
[ 172.337730] adt746x: Thermostat bus: 1, address: 0x2e, limit_adjust: 0, fan_speed: -1
[ 172.337735] sensor 0: CPU/INTREPID BOTTOMSIDE
[ 172.337739] sensor 1: CPU BOTTOMSIDE
[ 172.337742] sensor 2: PWR SUPPLY BOTTOMSIDE
[ 172.346566] adt746x: ADT7467 initializing
[ 172.348815] adt746x: Lowering max temperatures from 81, 80, 87 to 70, 50, 70
[ 172.453839] device-mapper: uevent: version 1.0.3
[ 172.455055] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 173.100641] fuse init (API version 7.13)
[ 173.188316] kjournald starting. Commit interval 5 seconds
[ 173.188650] EXT3 FS on hda5, internal journal
[ 173.188660] EXT3-fs: mounted filesystem with ordered data mode.
[ 178.610044] ondemand governor failed, too long transition latency of HW, fallback to performance governor
[ 185.054584] Bluetooth: L2CAP ver 2.14
[ 185.054592] Bluetooth: L2CAP socket layer initialized
[ 185.118390] Bluetooth: RFCOMM TTY layer initialized
[ 185.118401] Bluetooth: RFCOMM socket layer initialized
[ 185.118404] Bluetooth: RFCOMM ver 1.11
[ 185.455817] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 185.455825] Bluetooth: BNEP filters: protocol multicast
[ 185.612857] Bridge firewalling registered
[ 185.879258] Bluetooth: SCO (Voice Link) ver 0.6
[ 185.879266] Bluetooth: SCO socket layer initialized
[ 187.028094] b43 ssb0:0: firmware: requesting b43/ucode5.fw
[ 187.155460] b43 ssb0:0: firmware: requesting b43/pcm5.fw
[ 187.290817] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw
[ 187.313865] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw
[ 187.540340] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[ 187.594622] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 187.604828] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 190.231706] lp: driver loaded but no devices found
[ 190.562027] hda: host max PIO4 wanted PIO0 selected PIO0
[ 253.125411] radeonfb 0000:00:10.0: Invalid ROM contents
[ 253.125574] radeonfb 0000:00:10.0: Invalid ROM contents
[ 544.296300] hda: host max PIO4 wanted PIO0 selected PIO0
[ 596.802898] wlan0: direct probe to AP 2e:73:13:19:eb:84 (try 1)
[ 596.806077] wlan0: direct probe responded
[ 596.806091] wlan0: authenticate with AP 2e:73:13:19:eb:84 (try 1)
[ 596.816098] wlan0: authenticated
[ 596.816163] wlan0: associate with AP 2e:73:13:19:eb:84 (try 1)
[ 596.818811] wlan0: RX AssocResp from 2e:73:13:19:eb:84 (capab=0x411 status=0 aid=2)
[ 596.818825] wlan0: associated
[ 596.820379] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
** Model information
revision : 1.2 (pvr 8003 0102)
platform : PowerMac
model : PowerBook5,6
machine : PowerBook5,6
motherboard : PowerBook5,6 MacRISC3 Power Macintosh
** Loaded modules:
Module Size Used by
aes_generic 30462 2
parport_pc 28780 0
lp 10975 0
parport 32295 2 parport_pc,lp
sco 11560 2
bridge 48915 0
stp 4885 1 bridge
bnep 13750 2
rfcomm 37794 8
l2cap 32868 14 bnep,rfcomm
crc16 4475 1 l2cap
cpufreq_ondemand 10789 0
cpufreq_conservative 8952 0
cpufreq_stats 5840 0
cpufreq_powersave 4138 1
fuse 57776 1
dm_crypt 15716 0
dm_snapshot 26068 0
dm_mirror 15851 0
dm_region_hash 10535 1 dm_mirror
dm_log 11820 2 dm_mirror,dm_region_hash
dm_mod 63547 4 dm_crypt,dm_snapshot,dm_mirror,dm_log
max6650 9963 0
lm75 7477 0
therm_adt746x 10763 0
cpufreq_userspace 5156 0
sr_mod 17530 0
scsi_mod 126838 1 sr_mod
i2c_dev 8978 0
snd_aoa_codec_tas 13079 2
snd_aoa_fabric_layout 12091 1
snd_aoa 15580 2 snd_aoa_codec_tas,snd_aoa_fabric_layout
snd_aoa_i2sbus 20629 1
arc4 4442 2
snd_pcm_oss 42143 0
ecb 5353 2
snd_mixer_oss 19030 1 snd_pcm_oss
snd_pcm 65033 2 snd_aoa_i2sbus,snd_pcm_oss
snd_page_alloc 9045 1 snd_pcm
btusb 14024 2
b43 168213 0
snd_seq_midi 8216 0
bluetooth 52362 9 sco,bnep,rfcomm,l2cap,btusb
snd_rawmidi 21199 1 snd_seq_midi
rng_core 6446 1 b43
joydev 12871 0
snd_seq_midi_event 7956 1 snd_seq_midi
snd_seq 51409 2 snd_seq_midi,snd_seq_midi_event
ams 10712 0
snd_timer 20956 2 snd_pcm,snd_seq
yenta_socket 24451 1
snd_seq_device 8405 3 snd_seq_midi,snd_rawmidi,snd_seq
rsrc_nonstatic 11376 1 yenta_socket
mac80211 156280 1 b43
snd 52651 13 snd_aoa_codec_tas,snd_aoa_fabric_layout,snd_aoa,snd_aoa_i2sbus,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
appletouch 11881 0
evdev 11760 11
input_polldev 5651 1 ams
cfg80211 117489 2 b43,mac80211
soundcore 8003 1 snd
snd_aoa_soundbus 6669 2 snd_aoa_fabric_layout,snd_aoa_i2sbus
rfkill 17994 4 bluetooth,cfg80211
ext3 124692 2
jbd 40847 1 ext3
mbcache 8286 1 ext3
hid_apple 7602 0
usbhid 39936 0
hid 68185 2 hid_apple,usbhid
radeon 692511 0
ttm 46748 1 radeon
drm_kms_helper 24325 1 radeon
drm 142475 3 radeon,ttm,drm_kms_helper
ssb 49031 1 b43
ohci_hcd 35272 0
mmc_core 54692 2 b43,ssb
ide_cd_mod 28561 0
pcmcia 25655 2 b43,ssb
ehci_hcd 42846 0
firewire_ohci 25992 0
cdrom 36699 2 sr_mod,ide_cd_mod
usbcore 131855 6 btusb,appletouch,usbhid,ohci_hcd,ehci_hcd
pcmcia_core 30647 5 b43,yenta_socket,rsrc_nonstatic,ssb,pcmcia
i2c_powermac 6651 0
sungem 30865 0
sungem_phy 12982 1 sungem
firewire_core 44186 1 firewire_ohci
crc_itu_t 4495 1 firewire_core
nls_base 8693 1 usbcore
** PCI devices:
0000:00:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 2 AGP [106b:0034]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 16, Cache Line Size: 32 bytes
Capabilities: <access denied>
Kernel driver in use: agpgart-uninorth
0000:00:10.0 VGA compatible controller [0300]: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] [1002:4e50] (prog-if 00 [VGA controller])
Subsystem: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] [1002:4e50]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 255 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 48
Region 0: Memory at b8000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 0400 [size=256]
Region 2: Memory at b0000000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at b0020000 [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeonfb
0001:10:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 2 PCI [106b:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 16, Cache Line Size: 32 bytes
0001:10:12.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller [14e4:4320] (rev 03)
Subsystem: Apple Computer Inc. AirPort Extreme [106b:004e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16
Interrupt: pin A routed to IRQ 52
Region 0: Memory at a0006000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: b43-pci-bridge
0001:10:13.0 CardBus bridge [0607]: Texas Instruments PCI1510 PC card Cardbus Controller [104c:ac56]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 53
Region 0: Memory at a0004000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=10, secondary=11, subordinate=14, sec-latency=176
Memory window 0: 84000000-87fff000 (prefetchable)
Memory window 1: 88000000-8bfff000
I/O window 0: 00001000-000010ff
I/O window 1: 00001100-000011ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
0001:10:17.0 Unassigned class [ff00]: Apple Computer Inc. KeyLargo/Intrepid Mac I/O [106b:003e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16, Cache Line Size: 32 bytes
Region 0: Memory at 80000000 (32-bit, non-prefetchable) [size=512K]
Kernel driver in use: macio
0001:10:19.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo/Intrepid USB [106b:003f] (prog-if 10 [OHCI])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 28
0001:10:1a.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo/Intrepid USB [106b:003f] (prog-if 10 [OHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (750ns min, 21500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 29
Region 0: Memory at a0003000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
0001:10:1b.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10 [OHCI])
Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (250ns min, 10500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 63
Region 0: Memory at a0002000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
0001:10:1b.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10 [OHCI])
Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (250ns min, 10500ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 63
Region 0: Memory at a0001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
0001:10:1b.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04) (prog-if 20 [EHCI])
Subsystem: NEC Corporation USB 2.0 [1033:00e0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (4000ns min, 8500ns max), Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 63
Region 0: Memory at a0000000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
0002:24:0b.0 Host bridge [0600]: Apple Computer Inc. UniNorth 2 Internal PCI [106b:0036]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 16, Cache Line Size: 32 bytes
0002:24:0d.0 Unassigned class [ff00]: Apple Computer Inc. UniNorth/Intrepid ATA/100 [106b:003b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin ? routed to IRQ 39
Region 0: Memory at f5004000 (32-bit, non-prefetchable) [size=16K]
Kernel driver in use: ide-pmac
0002:24:0e.0 FireWire (IEEE 1394) [0c00]: Apple Computer Inc. UniNorth 2 FireWire [106b:0031] (rev 81) (prog-if 10 [OHCI])
Subsystem: Apple Computer Inc. iBook G4 2004 [106b:5811]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (3000ns min, 6000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 40
Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
0002:24:0f.0 Ethernet controller [0200]: Apple Computer Inc. UniNorth 2 GMAC (Sun GEM) [106b:0032] (rev 80)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 16 (16000ns min, 16000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 41
Region 0: Memory at f5200000 (32-bit, non-prefetchable) [size=2M]
Expansion ROM at f5100000 [disabled] [size=1M]
Kernel driver in use: gem
** USB devices:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 004: ID 05ac:8205 Apple, Inc. Bluetooth HCI
Bus 002 Device 003: ID 05ac:020f Apple, Inc. Internal Keyboard/Trackpad (ISO)
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers testing-proposed-updates
APT policy: (500, 'testing-proposed-updates'), (500, 'testing')
Architecture: powerpc (ppc)
Kernel: Linux 2.6.32-5-powerpc
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.32-5-powerpc depends on:
ii debconf [debconf-2.0] 1.5.36 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.5 tools for generating an initramfs
ii libc6 2.11.2-7 Embedded GNU C Library: Shared lib
ii linux-base 2.6.32-27 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
ii yaird [linux-initramfs-tool] 0.0.13-5 Yet Another mkInitRD
Versions of packages linux-image-2.6.32-5-powerpc recommends:
ii firmware-linux-free 2.6.32-27 Binary firmware for various driver
Versions of packages linux-image-2.6.32-5-powerpc suggests:
pn linux-doc-2.6.32 <none> (no description available)
pn mkvmlinuz <none> (no description available)
Versions of packages linux-image-2.6.32-5-powerpc is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
ii firmware-linux-nonfree 0.27 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-powerpc/postinst/ignoring-do-bootloader-2.6.32-5-powerpc:
linux-image-2.6.32-5-powerpc/postinst/depmod-error-initrd-2.6.32-5-powerpc: false
linux-image-2.6.32-5-powerpc/prerm/removing-running-kernel-2.6.32-5-powerpc: true
* linux-image-2.6.32-5-powerpc/postinst/missing-firmware-2.6.32-5-powerpc:
Reply to: