Bug#598104: does not load i915 driver [Toshiba Satellite C650]
Package: xserver-xorg-video-intel
Version: 2:2.9.1-4
Severity: normal
Here are dmesg output for standard Debian kernel with and without
acpi=off kernel option.
Both dmesg were run as root.
*** dmesg-with-acpi-disabled
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-23) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-3) ) #1 SMP Fri Sep 17 21:50:19 UTC 2010
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=UUID=2e9337c0-168e-4bb8-9814-937eb6f458fa ro acpi=off quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000b7b6c000 (usable)
[ 0.000000] BIOS-e820: 00000000b7b6c000 - 00000000b7bbf000 (reserved)
[ 0.000000] BIOS-e820: 00000000b7bbf000 - 00000000b7c80000 (usable)
[ 0.000000] BIOS-e820: 00000000b7c80000 - 00000000b7cbf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000b7cbf000 - 00000000b7cec000 (usable)
[ 0.000000] BIOS-e820: 00000000b7cec000 - 00000000b7cff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000b7cff000 - 00000000b7d00000 (usable)
[ 0.000000] BIOS-e820: 00000000b7d00000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0xb7d00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 0FFF00000 mask FFFF00000 write-protect
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0B8000000 mask FF8000000 uncachable
[ 0.000000] 4 base 0B7E00000 mask FFFE00000 uncachable
[ 0.000000] 5 base 0B7D00000 mask FFFF00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000b7d00000
[ 0.000000] 0000000000 - 00b7c00000 page 2M
[ 0.000000] 00b7c00000 - 00b7d00000 page 4k
[ 0.000000] kernel direct mapping tables up to b7d00000 @ 8000-d000
[ 0.000000] RAMDISK: 37757000 - 37fefff1
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000000b7d00000
[ 0.000000] Bootmem setup node 0 0000000000000000-00000000b7d00000
[ 0.000000] NODE_DATA [000000000000b000 - 0000000000012fff]
[ 0.000000] bootmap [0000000000013000 - 0000000000029f9f] pages 17
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 00b7d00000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001684414] TEXT DATA BSS ==> [0001000000 - 0001684414]
[ 0.000000] #3 [0037757000 - 0037fefff1] RAMDISK ==> [0037757000 - 0037fefff1]
[ 0.000000] #4 [000009e000 - 0000100000] BIOS reserved ==> [000009e000 - 0000100000]
[ 0.000000] #5 [0001685000 - 0001685210] BRK ==> [0001685000 - 0001685210]
[ 0.000000] #6 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000]
[ 0.000000] [ffffea0000000000-ffffea00029fffff] PMD -> [ffff880001c00000-ffff8800045fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000b7b6c
[ 0.000000] 0: 0x000b7bbf -> 0x000b7c80
[ 0.000000] 0: 0x000b7cbf -> 0x000b7cec
[ 0.000000] 0: 0x000b7cff -> 0x000b7d00
[ 0.000000] On node 0 totalpages: 752633
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 104 pages reserved
[ 0.000000] DMA zone: 3838 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10238 pages used for memmap
[ 0.000000] DMA32 zone: 738397 pages, LIFO batch:31
[ 0.000000] SFI: Simple Firmware Interface v0.7 http://simplefirmware.org
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000b7b6c000 - 00000000b7bbf000
[ 0.000000] PM: Registered nosave memory: 00000000b7c80000 - 00000000b7cbf000
[ 0.000000] PM: Registered nosave memory: 00000000b7cec000 - 00000000b7cff000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:38000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001800000 s90328 r8192 d24360 u2097152
[ 0.000000] pcpu-alloc: s90328 r8192 d24360 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 742235
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=UUID=2e9337c0-168e-4bb8-9814-937eb6f458fa ro acpi=off quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 2951584k/3011584k available (3075k kernel code, 1052k absent, 58948k reserved, 1879k data, 584k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:256
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2294.211 MHz processor.
[ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4588.42 BogoMIPS (lpj=9176844)
[ 0.004027] Security Framework initialized
[ 0.004033] SELinux: Disabled at boot.
[ 0.004344] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.006708] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.008788] Mount-cache hash table entries: 256
[ 0.008943] Initializing cgroup subsys ns
[ 0.008947] Initializing cgroup subsys cpuacct
[ 0.008950] Initializing cgroup subsys devices
[ 0.008952] Initializing cgroup subsys freezer
[ 0.008954] Initializing cgroup subsys net_cls
[ 0.008979] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008981] CPU: L2 cache: 1024K
[ 0.008984] CPU 0/0x0 -> Node 0
[ 0.008986] CPU: Unsupported number of siblings 2
[ 0.008990] mce: CPU supports 6 MCE banks
[ 0.008997] CPU0: Thermal monitoring enabled (TM2)
[ 0.009003] using mwait in idle threads.
[ 0.009005] Performance Events: Core2 events, Intel PMU driver.
[ 0.009010] ... version: 2
[ 0.009011] ... bit width: 40
[ 0.009013] ... generic registers: 2
[ 0.009014] ... value mask: 000000ffffffffff
[ 0.009016] ... max period: 000000007fffffff
[ 0.009017] ... fixed-purpose events: 3
[ 0.009018] ... event mask: 0000000700000003
[ 0.009029] SMP alternatives: switching to UP code
[ 0.013590] Freeing SMP alternatives: 28k freed
[ 0.013657] Setting APIC routing to flat
[ 0.013659] weird, boot CPU (#0) not listed by the BIOS.
[ 0.013660] SMP motherboard not detected.
[ 0.120017] SMP disabled
[ 0.120114] Brought up 1 CPUs
[ 0.120116] Total of 1 processors activated (4588.42 BogoMIPS).
[ 0.120483] CPU0 attaching NULL sched-domain.
[ 0.120584] devtmpfs: initialized
[ 0.123466] regulator: core version 0.5
[ 0.123507] NET: Registered protocol family 16
[ 0.123629] PCI: Using configuration type 1 for base access
[ 0.123946] bio: create slab <bio-0> at 0
[ 0.123992] ACPI: Interpreter disabled.
[ 0.124020] vgaarb: loaded
[ 0.124064] PCI: Probing PCI hardware
[ 0.124066] PCI: Probing PCI hardware (bus 00)
[ 0.124105] DMAR: Forcing write-buffer flush capability
[ 0.124137] pci 0000:00:02.0: reg 10 64bit mmio: [0xd0000000-0xd03fffff]
[ 0.124143] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xc0000000-0xcfffffff]
[ 0.124148] pci 0000:00:02.0: reg 20 io port: [0x5110-0x5117]
[ 0.124183] pci 0000:00:02.1: reg 10 64bit mmio: [0xd3400000-0xd34fffff]
[ 0.124307] pci 0000:00:1a.0: reg 20 io port: [0x50e0-0x50ff]
[ 0.124422] pci 0000:00:1a.1: reg 20 io port: [0x50c0-0x50df]
[ 0.124534] pci 0000:00:1a.7: reg 10 32bit mmio: [0xd6704c00-0xd6704fff]
[ 0.124608] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.124613] pci 0000:00:1a.7: PME# disabled
[ 0.124662] pci 0000:00:1b.0: reg 10 64bit mmio: [0xd6700000-0xd6703fff]
[ 0.124713] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.124717] pci 0000:00:1b.0: PME# disabled
[ 0.124792] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.124796] pci 0000:00:1c.0: PME# disabled
[ 0.124872] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.124876] pci 0000:00:1c.1: PME# disabled
[ 0.124954] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.124958] pci 0000:00:1c.4: PME# disabled
[ 0.125045] pci 0000:00:1d.0: reg 20 io port: [0x50a0-0x50bf]
[ 0.125163] pci 0000:00:1d.1: reg 20 io port: [0x5080-0x509f]
[ 0.125277] pci 0000:00:1d.2: reg 20 io port: [0x5060-0x507f]
[ 0.125389] pci 0000:00:1d.3: reg 20 io port: [0x5040-0x505f]
[ 0.125495] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd6704800-0xd6704bff]
[ 0.125568] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.125573] pci 0000:00:1d.7: PME# disabled
[ 0.125796] pci 0000:00:1f.2: reg 10 io port: [0x5108-0x510f]
[ 0.125802] pci 0000:00:1f.2: reg 14 io port: [0x511c-0x511f]
[ 0.125809] pci 0000:00:1f.2: reg 18 io port: [0x5100-0x5107]
[ 0.125815] pci 0000:00:1f.2: reg 1c io port: [0x5118-0x511b]
[ 0.125822] pci 0000:00:1f.2: reg 20 io port: [0x5020-0x503f]
[ 0.125828] pci 0000:00:1f.2: reg 24 32bit mmio: [0xd6704000-0xd67047ff]
[ 0.125867] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.125871] pci 0000:00:1f.2: PME# disabled
[ 0.125906] pci 0000:00:1f.3: reg 10 64bit mmio: [0xd6705000-0xd67050ff]
[ 0.125922] pci 0000:00:1f.3: reg 20 io port: [0x5000-0x501f]
[ 0.126014] pci 0000:02:00.0: reg 10 64bit mmio: [0xd5600000-0xd563ffff]
[ 0.126024] pci 0000:02:00.0: reg 18 io port: [0x3000-0x307f]
[ 0.126107] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.126113] pci 0000:02:00.0: PME# disabled
[ 0.126150] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.126231] pci 0000:00:1c.0: bridge io port: [0x3000-0x4fff]
[ 0.126235] pci 0000:00:1c.0: bridge 32bit mmio: [0xd5600000-0xd66fffff]
[ 0.126242] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xd0400000-0xd13fffff]
[ 0.126300] pci 0000:03:00.0: reg 10 64bit mmio: [0xd4500000-0xd450ffff]
[ 0.126375] pci 0000:03:00.0: supports D1
[ 0.126376] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 0.126382] pci 0000:03:00.0: PME# disabled
[ 0.132094] pci 0000:00:1c.1: bridge io port: [0x2000-0x2fff]
[ 0.132098] pci 0000:00:1c.1: bridge 32bit mmio: [0xd4500000-0xd55fffff]
[ 0.132105] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xd1400000-0xd23fffff]
[ 0.132152] pci 0000:00:1c.4: bridge io port: [0x1000-0x1fff]
[ 0.132156] pci 0000:00:1c.4: bridge 32bit mmio: [0xd3500000-0xd44fffff]
[ 0.132163] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xd2400000-0xd33fffff]
[ 0.132224] pci 0000:00:1e.0: transparent bridge
[ 0.132286] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.132686] PCI: Discovered primary peer bus ff [IRQ]
[ 0.132695] pci 0000:00:1f.0: PIIX/ICH IRQ router [8086:2919]
[ 0.132883] Switching to clocksource tsc
[ 0.133842] pnp: PnP ACPI: disabled
[ 0.134085] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.134088] pci 0000:00:1c.0: IO window: 0x3000-0x4fff
[ 0.134094] pci 0000:00:1c.0: MEM window: 0xd5600000-0xd66fffff
[ 0.134098] pci 0000:00:1c.0: PREFETCH window: 0x000000d0400000-0x000000d13fffff
[ 0.134106] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.134109] pci 0000:00:1c.1: IO window: 0x2000-0x2fff
[ 0.134114] pci 0000:00:1c.1: MEM window: 0xd4500000-0xd55fffff
[ 0.134118] pci 0000:00:1c.1: PREFETCH window: 0x000000d1400000-0x000000d23fffff
[ 0.134125] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:07
[ 0.134128] pci 0000:00:1c.4: IO window: 0x1000-0x1fff
[ 0.134133] pci 0000:00:1c.4: MEM window: 0xd3500000-0xd44fffff
[ 0.134137] pci 0000:00:1c.4: PREFETCH window: 0x000000d2400000-0x000000d33fffff
[ 0.134144] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 0.134146] pci 0000:00:1e.0: IO window: disabled
[ 0.134151] pci 0000:00:1e.0: MEM window: disabled
[ 0.134155] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.134172] PCI: setting IRQ 11 as level-triggered
[ 0.134176] pci 0000:00:1c.0: found PCI INT A -> IRQ 11
[ 0.134192] pci 0000:00:1c.0: sharing IRQ 11 with 0000:00:1c.4
[ 0.134215] pci 0000:00:1c.0: sharing IRQ 11 with 0000:03:00.0
[ 0.134219] pci 0000:00:1c.0: setting latency timer to 64
[ 0.134232] PCI: setting IRQ 5 as level-triggered
[ 0.134236] pci 0000:00:1c.1: found PCI INT B -> IRQ 5
[ 0.134269] pci 0000:00:1c.1: sharing IRQ 5 with 0000:02:00.0
[ 0.134276] pci 0000:00:1c.1: setting latency timer to 64
[ 0.134284] pci 0000:00:1c.4: enabling device (0000 -> 0003)
[ 0.134291] pci 0000:00:1c.4: found PCI INT A -> IRQ 11
[ 0.134327] pci 0000:00:1c.4: sharing IRQ 11 with 0000:03:00.0
[ 0.134332] pci 0000:00:1c.4: setting latency timer to 64
[ 0.134340] pci 0000:00:1e.0: setting latency timer to 64
[ 0.134345] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.134347] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.134350] pci_bus 0000:02: resource 0 io: [0x3000-0x4fff]
[ 0.134352] pci_bus 0000:02: resource 1 mem: [0xd5600000-0xd66fffff]
[ 0.134354] pci_bus 0000:02: resource 2 pref mem [0xd0400000-0xd13fffff]
[ 0.134356] pci_bus 0000:03: resource 0 io: [0x2000-0x2fff]
[ 0.134358] pci_bus 0000:03: resource 1 mem: [0xd4500000-0xd55fffff]
[ 0.134360] pci_bus 0000:03: resource 2 pref mem [0xd1400000-0xd23fffff]
[ 0.134362] pci_bus 0000:07: resource 0 io: [0x1000-0x1fff]
[ 0.134364] pci_bus 0000:07: resource 1 mem: [0xd3500000-0xd44fffff]
[ 0.134366] pci_bus 0000:07: resource 2 pref mem [0xd2400000-0xd33fffff]
[ 0.134369] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
[ 0.134371] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.134373] pci_bus 0000:ff: resource 0 io: [0x00-0xffff]
[ 0.134375] pci_bus 0000:ff: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.134403] NET: Registered protocol family 2
[ 0.134525] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.135614] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.139362] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.139915] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.139919] TCP reno registered
[ 0.140040] NET: Registered protocol family 1
[ 0.140060] pci 0000:00:02.0: Boot video device
[ 0.171149] Unpacking initramfs...
[ 0.358627] Freeing initrd memory: 8803k freed
[ 0.362797] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 0.363029] audit: initializing netlink socket (disabled)
[ 0.363041] type=2000 audit(1285522374.359:1): initialized
[ 0.365949] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.366993] VFS: Disk quotas dquot_6.5.2
[ 0.367035] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.367133] msgmni has been set to 5782
[ 0.367308] alg: No test for stdrng (krng)
[ 0.367354] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.367357] io scheduler noop registered
[ 0.367358] io scheduler anticipatory registered
[ 0.367360] io scheduler deadline registered
[ 0.367388] io scheduler cfq registered (default)
[ 0.367504] alloc irq_desc for 16 on node -1
[ 0.367505] alloc kstat_irqs on node -1
[ 0.367518] pcieport 0000:00:1c.0: irq 16 for MSI/MSI-X
[ 0.367528] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.367656] alloc irq_desc for 17 on node -1
[ 0.367658] alloc kstat_irqs on node -1
[ 0.367666] pcieport 0000:00:1c.1: irq 17 for MSI/MSI-X
[ 0.367675] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.367799] alloc irq_desc for 18 on node -1
[ 0.367801] alloc kstat_irqs on node -1
[ 0.367809] pcieport 0000:00:1c.4: irq 18 for MSI/MSI-X
[ 0.367819] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.368929] Linux agpgart interface v0.103
[ 0.368942] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset
[ 0.369207] agpgart-intel 0000:00:00.0: detected 131068K stolen memory
[ 0.394076] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 0.394116] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.394312] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.394353] PNP: No PS/2 controller found. Probing ports directly.
[ 0.422859] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.422864] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.422955] mice: PS/2 mouse device common for all mice
[ 0.423799] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 0.423820] rtc0: alarms up to one day, 114 bytes nvram
[ 0.423827] cpuidle: using governor ladder
[ 0.423829] cpuidle: using governor menu
[ 0.423832] No iBFT detected.
[ 0.424073] TCP cubic registered
[ 0.424160] NET: Registered protocol family 10
[ 0.424490] lo: Disabled Privacy Extensions
[ 0.424694] Mobile IPv6
[ 0.424696] NET: Registered protocol family 17
[ 0.424763] PM: Resume from disk failed.
[ 0.424772] registered taskstats version 1
[ 0.425216] rtc_cmos rtc_cmos: setting system clock to 2010-09-26 17:32:55 UTC (1285522375)
[ 0.425253] Initalizing network drop monitor service
[ 0.425272] Freeing unused kernel memory: 584k freed
[ 0.425426] Write protecting the kernel read-only data: 4216k
[ 0.439932] udev: starting version 160
[ 0.455031] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 0.524265] usbcore: registered new interface driver usbfs
[ 0.524388] usbcore: registered new interface driver hub
[ 0.524497] usbcore: registered new device driver usb
[ 0.526420] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.526451] ehci_hcd 0000:00:1a.7: found PCI INT D -> IRQ 11
[ 0.526472] ehci_hcd 0000:00:1a.7: sharing IRQ 11 with 0000:00:1d.1
[ 0.526486] ehci_hcd 0000:00:1a.7: sharing IRQ 11 with 0000:00:1f.2
[ 0.526506] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.526510] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.526531] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.526560] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.530439] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.530448] ehci_hcd 0000:00:1a.7: irq 11, io mem 0xd6704c00
[ 0.534727] SCSI subsystem initialized
[ 0.546894] libata version 3.00 loaded.
[ 0.555123] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.555164] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.555166] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.555168] usb usb1: Product: EHCI Host Controller
[ 0.555170] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 0.555172] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.555236] usb usb1: configuration #1 chosen from 1 choice
[ 0.555261] hub 1-0:1.0: USB hub found
[ 0.555268] hub 1-0:1.0: 4 ports detected
[ 0.555367] ahci 0000:00:1f.2: version 3.0
[ 0.555385] ahci 0000:00:1f.2: found PCI INT B -> IRQ 11
[ 0.555395] ahci 0000:00:1f.2: sharing IRQ 11 with 0000:00:1a.7
[ 0.555407] ahci 0000:00:1f.2: sharing IRQ 11 with 0000:00:1d.1
[ 0.555463] alloc irq_desc for 19 on node -1
[ 0.555464] alloc kstat_irqs on node -1
[ 0.555476] ahci 0000:00:1f.2: irq 19 for MSI/MSI-X
[ 0.555555] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 0.555559] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part ccc sxs
[ 0.555564] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.555810] scsi0 : ahci
[ 0.555975] scsi1 : ahci
[ 0.556052] scsi2 : ahci
[ 0.556128] scsi3 : ahci
[ 0.556202] scsi4 : ahci
[ 0.556277] scsi5 : ahci
[ 0.556314] ata1: SATA max UDMA/133 abar m2048@0xd6704000 port 0xd6704100 irq 19
[ 0.556317] ata2: SATA max UDMA/133 abar m2048@0xd6704000 port 0xd6704180 irq 19
[ 0.556319] ata3: DUMMY
[ 0.556320] ata4: DUMMY
[ 0.556323] ata5: SATA max UDMA/133 abar m2048@0xd6704000 port 0xd6704300 irq 19
[ 0.556326] ata6: SATA max UDMA/133 abar m2048@0xd6704000 port 0xd6704380 irq 19
[ 0.556467] ehci_hcd 0000:00:1d.7: found PCI INT A -> IRQ 11
[ 0.556487] ehci_hcd 0000:00:1d.7: sharing IRQ 11 with 0000:00:1d.0
[ 0.556524] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.556527] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.556539] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.556571] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.560472] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.560698] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xd6704800
[ 0.575360] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.575383] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.575385] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.575387] usb usb2: Product: EHCI Host Controller
[ 0.575389] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 0.575391] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.575506] usb usb2: configuration #1 chosen from 1 choice
[ 0.575558] hub 2-0:1.0: USB hub found
[ 0.575566] hub 2-0:1.0: 8 ports detected
[ 0.580682] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.580719] uhci_hcd 0000:00:1a.0: found PCI INT A -> IRQ 5
[ 0.580756] uhci_hcd 0000:00:1a.0: sharing IRQ 5 with 0000:02:00.0
[ 0.580768] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.580771] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.580781] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.580812] uhci_hcd 0000:00:1a.0: irq 11, io base 0x000050e0
[ 0.580846] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.580848] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.580850] usb usb3: Product: UHCI Host Controller
[ 0.580852] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 0.580853] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.580954] usb usb3: configuration #1 chosen from 1 choice
[ 0.581005] hub 3-0:1.0: USB hub found
[ 0.581012] hub 3-0:1.0: 2 ports detected
[ 0.581060] PCI: setting IRQ 10 as level-triggered
[ 0.581063] uhci_hcd 0000:00:1a.1: found PCI INT B -> IRQ 10
[ 0.581104] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.581107] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.581113] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.581143] uhci_hcd 0000:00:1a.1: irq 10, io base 0x000050c0
[ 0.581171] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.581173] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.581175] usb usb4: Product: UHCI Host Controller
[ 0.581177] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 0.581179] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.581260] usb usb4: configuration #1 chosen from 1 choice
[ 0.581311] hub 4-0:1.0: USB hub found
[ 0.581317] hub 4-0:1.0: 2 ports detected
[ 0.581361] uhci_hcd 0000:00:1d.0: found PCI INT A -> IRQ 11
[ 0.581385] uhci_hcd 0000:00:1d.0: sharing IRQ 11 with 0000:00:1d.7
[ 0.581403] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.581406] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.581412] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.581438] uhci_hcd 0000:00:1d.0: irq 11, io base 0x000050a0
[ 0.581470] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.581472] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.581474] usb usb5: Product: UHCI Host Controller
[ 0.581476] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 0.581477] usb usb5: SerialNumber: 0000:00:1d.0
[ 0.581554] usb usb5: configuration #1 chosen from 1 choice
[ 0.581602] hub 5-0:1.0: USB hub found
[ 0.581608] hub 5-0:1.0: 2 ports detected
[ 0.581656] uhci_hcd 0000:00:1d.1: found PCI INT B -> IRQ 11
[ 0.581666] uhci_hcd 0000:00:1d.1: sharing IRQ 11 with 0000:00:1a.7
[ 0.581700] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.581703] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.581709] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.581737] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00005080
[ 0.581766] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.581768] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.581770] usb usb6: Product: UHCI Host Controller
[ 0.581772] usb usb6: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 0.581774] usb usb6: SerialNumber: 0000:00:1d.1
[ 0.581854] usb usb6: configuration #1 chosen from 1 choice
[ 0.581901] hub 6-0:1.0: USB hub found
[ 0.581907] hub 6-0:1.0: 2 ports detected
[ 0.581954] uhci_hcd 0000:00:1d.2: found PCI INT D -> IRQ 5
[ 0.581989] uhci_hcd 0000:00:1d.2: sharing IRQ 5 with 0000:02:00.0
[ 0.581997] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.582001] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.582006] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.582033] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00005060
[ 0.582065] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.582067] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.582069] usb usb7: Product: UHCI Host Controller
[ 0.582071] usb usb7: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 0.582072] usb usb7: SerialNumber: 0000:00:1d.2
[ 0.582150] usb usb7: configuration #1 chosen from 1 choice
[ 0.582202] hub 7-0:1.0: USB hub found
[ 0.582208] hub 7-0:1.0: 2 ports detected
[ 0.582253] uhci_hcd 0000:00:1d.3: found PCI INT C -> IRQ 11
[ 0.582285] uhci_hcd 0000:00:1d.3: sharing IRQ 11 with 0000:00:1f.3
[ 0.582296] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.582299] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.582305] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[ 0.582333] uhci_hcd 0000:00:1d.3: irq 11, io base 0x00005040
[ 0.582363] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.582365] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.582367] usb usb8: Product: UHCI Host Controller
[ 0.582369] usb usb8: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 0.582370] usb usb8: SerialNumber: 0000:00:1d.3
[ 0.582450] usb usb8: configuration #1 chosen from 1 choice
[ 0.582498] hub 8-0:1.0: USB hub found
[ 0.582505] hub 8-0:1.0: 2 ports detected
[ 0.867141] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 0.879153] ata1: SATA link down (SStatus 0 SControl 300)
[ 0.883162] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.047160] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.047177] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.067889] ata6.00: ATAPI: TSSTcorp CDDVDW TS-L633C, TF20, max UDMA/100
[ 1.088202] ata6.00: configured for UDMA/100
[ 1.097803] ata2.00: ATA-8: TOSHIBA MK3265GSX, GJ003M, max UDMA/100
[ 1.097805] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.098534] ata2.00: configured for UDMA/100
[ 1.098620] scsi 1:0:0:0: Direct-Access ATA TOSHIBA MK3265GS GJ00 PQ: 0 ANSI: 5
[ 1.100650] scsi 5:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633C TF20 PQ: 0 ANSI: 5
[ 1.115840] sd 1:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.115883] sd 1:0:0:0: [sda] Write Protect is off
[ 1.115885] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.115904] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.116014] sda:sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.122265] Uniform CD-ROM driver Revision: 3.20
[ 1.122503] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 1.161169] sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 1.221528] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.227751] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 1.228030] sr 5:0:0:0: Attached scsi generic sg1 type 5
[ 2.050107] PM: Starting manual resume from disk
[ 2.050111] PM: Resume from partition 8:6
[ 2.050112] PM: Checking hibernation image.
[ 2.076401] PM: Error -22 checking image file
[ 2.076402] PM: Resume from disk failed.
[ 2.137779] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 2.227818] usb 1-2: New USB device found, idVendor=10f1, idProduct=1a2a
[ 2.227821] usb 1-2: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.227824] usb 1-2: Product: USB Camera
[ 2.227825] usb 1-2: Manufacturer: Generic
[ 2.227827] usb 1-2: SerialNumber: MU418ASA
[ 2.227908] usb 1-2: configuration #1 chosen from 1 choice
[ 2.351227] usb 1-3: new high speed USB device using ehci_hcd and address 3
[ 2.740439] usb 1-3: New USB device found, idVendor=0bda, idProduct=0138
[ 2.740442] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.740444] usb 1-3: Product: USB2.0-CRW
[ 2.740446] usb 1-3: Manufacturer: Generic
[ 2.740447] usb 1-3: SerialNumber: 20090516388200000
[ 2.740525] usb 1-3: configuration #1 chosen from 1 choice
[ 6.613315] udev: starting version 160
[ 6.742226] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 7.131251] i801_smbus 0000:00:1f.3: found PCI INT C -> IRQ 11
[ 7.131276] i801_smbus 0000:00:1f.3: sharing IRQ 11 with 0000:00:1d.3
[ 7.246133] cfg80211: Using static regulatory domain info
[ 7.246136] cfg80211: Regulatory domain: US
[ 7.246137] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 7.246140] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 7.246142] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 7.246144] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 7.246147] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 7.246149] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 7.246151] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 7.246349] cfg80211: Calling CRDA for country: US
[ 7.300841] Linux video capture interface: v2.00
[ 7.301151] Initializing USB Mass Storage driver...
[ 7.302811] scsi6 : SCSI emulation for USB Mass Storage devices
[ 7.302926] usbcore: registered new interface driver usb-storage
[ 7.302929] USB Mass Storage support registered.
[ 7.303474] usb-storage: device found at 3
[ 7.303476] usb-storage: waiting for device to settle before scanning
[ 7.327514] uvcvideo: Found UVC 1.00 device USB Camera (10f1:1a2a)
[ 7.348855] input: USB Camera as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input3
[ 7.348901] usbcore: registered new interface driver uvcvideo
[ 7.348904] USB Video Class driver (v0.1.0)
[ 7.354156] HDA Intel 0000:00:1b.0: found PCI INT A -> IRQ 11
[ 7.354220] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 7.444438] ath9k 0000:03:00.0: found PCI INT A -> IRQ 11
[ 7.444488] ath9k 0000:03:00.0: setting latency timer to 64
[ 7.494245] ath: EEPROM regdomain: 0x65
[ 7.494246] ath: EEPROM indicates we should expect a direct regpair map
[ 7.494250] ath: Country alpha2 being used: 00
[ 7.494251] ath: Regpair used: 0x65
[ 7.866014] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000
[ 7.927379] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input4
[ 8.112045] phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 8.112516] Registered led device: ath9k-phy0::radio
[ 8.112528] Registered led device: ath9k-phy0::assoc
[ 8.112540] Registered led device: ath9k-phy0::tx
[ 8.112552] Registered led device: ath9k-phy0::rx
[ 8.112563] phy0: Atheros AR9285 MAC/BB Rev:2 AR5133 RF Rev:e0: mem=0xffffc90001720000, irq=11
[ 8.330282] Adding 3317380k swap on /dev/sda6. Priority:-1 extents:1 across:3317380k
[ 8.763961] loop: module loaded
[ 9.573685] EXT4-fs (sda7): mounted filesystem with ordered data mode
[ 10.070622] fuse init (API version 7.13)
[ 11.349648] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input5
[ 12.300127] usb-storage: device scan complete
[ 12.302741] scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 12.303530] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 12.309743] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 18.048724] ADDRCONF(NETDEV_UP): wlan0: link is not ready
*** dmesg-with-acpi-enabled
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-23) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-3) ) #1 SMP Fri Sep 17 21:50:19 UTC 2010
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=UUID=2e9337c0-168e-4bb8-9814-937eb6f458fa ro quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000b7b6c000 (usable)
[ 0.000000] BIOS-e820: 00000000b7b6c000 - 00000000b7bbf000 (reserved)
[ 0.000000] BIOS-e820: 00000000b7bbf000 - 00000000b7c80000 (usable)
[ 0.000000] BIOS-e820: 00000000b7c80000 - 00000000b7cbf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000b7cbf000 - 00000000b7cec000 (usable)
[ 0.000000] BIOS-e820: 00000000b7cec000 - 00000000b7cff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000b7cff000 - 00000000b7d00000 (usable)
[ 0.000000] BIOS-e820: 00000000b7d00000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0xb7d00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 0FFF00000 mask FFFF00000 write-protect
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0B8000000 mask FF8000000 uncachable
[ 0.000000] 4 base 0B7E00000 mask FFFE00000 uncachable
[ 0.000000] 5 base 0B7D00000 mask FFFF00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000b7d00000
[ 0.000000] 0000000000 - 00b7c00000 page 2M
[ 0.000000] 00b7c00000 - 00b7d00000 page 4k
[ 0.000000] kernel direct mapping tables up to b7d00000 @ 8000-d000
[ 0.000000] RAMDISK: 37757000 - 37fefff1
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 TOSINV)
[ 0.000000] ACPI: XSDT 00000000b7cfe120 00064 (v01 TOSINV TOSINV00 00000001 01000013)
[ 0.000000] ACPI: FACP 00000000b7cfd000 000F4 (v04 TOSINV TOSINV00 00000001 MSFT 01000013)
[ 0.000000] ACPI: DSDT 00000000b7cef000 094DE (v01 TOSINV TOSINV00 00000001 MSFT 01000013)
[ 0.000000] ACPI: FACS 00000000b7c93000 00040
[ 0.000000] ACPI: HPET 00000000b7cfc000 00038 (v01 TOSINV TOSINV00 00000001 MSFT 01000013)
[ 0.000000] ACPI: APIC 00000000b7cfb000 0006C (v02 TOSINV TOSINV00 00000001 MSFT 01000013)
[ 0.000000] ACPI: MCFG 00000000b7cfa000 0003C (v01 TOSINV TOSINV00 00000001 MSFT 01000013)
[ 0.000000] ACPI: ASF! 00000000b7cf9000 000A5 (v32 TOSINV TOSINV00 00000001 MSFT 01000013)
[ 0.000000] ACPI: SLIC 00000000b7cee000 00176 (v01 TOSINV TOSINV00 00000001 MSFT 01000013)
[ 0.000000] ACPI: BOOT 00000000b7ced000 00028 (v01 TOSINV TOSINV00 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 00000000b7cec000 00655 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000000b7d00000
[ 0.000000] Bootmem setup node 0 0000000000000000-00000000b7d00000
[ 0.000000] NODE_DATA [000000000000b000 - 0000000000012fff]
[ 0.000000] bootmap [0000000000013000 - 0000000000029f9f] pages 17
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 00b7d00000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001684414] TEXT DATA BSS ==> [0001000000 - 0001684414]
[ 0.000000] #3 [0037757000 - 0037fefff1] RAMDISK ==> [0037757000 - 0037fefff1]
[ 0.000000] #4 [000009e000 - 0000100000] BIOS reserved ==> [000009e000 - 0000100000]
[ 0.000000] #5 [0001685000 - 0001685210] BRK ==> [0001685000 - 0001685210]
[ 0.000000] #6 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000]
[ 0.000000] [ffffea0000000000-ffffea00029fffff] PMD -> [ffff880001c00000-ffff8800045fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000b7b6c
[ 0.000000] 0: 0x000b7bbf -> 0x000b7c80
[ 0.000000] 0: 0x000b7cbf -> 0x000b7cec
[ 0.000000] 0: 0x000b7cff -> 0x000b7d00
[ 0.000000] On node 0 totalpages: 752633
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 104 pages reserved
[ 0.000000] DMA zone: 3838 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10238 pages used for memmap
[ 0.000000] DMA32 zone: 738397 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000b7b6c000 - 00000000b7bbf000
[ 0.000000] PM: Registered nosave memory: 00000000b7c80000 - 00000000b7cbf000
[ 0.000000] PM: Registered nosave memory: 00000000b7cec000 - 00000000b7cff000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:38000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001800000 s90328 r8192 d24360 u524288
[ 0.000000] pcpu-alloc: s90328 r8192 d24360 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 742235
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=UUID=2e9337c0-168e-4bb8-9814-937eb6f458fa ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 2951232k/3011584k available (3075k kernel code, 1052k absent, 59300k reserved, 1879k data, 584k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:440
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2294.511 MHz processor.
[ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.02 BogoMIPS (lpj=9178044)
[ 0.004026] Security Framework initialized
[ 0.004031] SELinux: Disabled at boot.
[ 0.004334] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.006694] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.008792] Mount-cache hash table entries: 256
[ 0.008956] Initializing cgroup subsys ns
[ 0.008960] Initializing cgroup subsys cpuacct
[ 0.008964] Initializing cgroup subsys devices
[ 0.008966] Initializing cgroup subsys freezer
[ 0.008968] Initializing cgroup subsys net_cls
[ 0.008994] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008996] CPU: L2 cache: 1024K
[ 0.009000] CPU 0/0x0 -> Node 0
[ 0.009002] CPU: Physical Processor ID: 0
[ 0.009003] CPU: Processor Core ID: 0
[ 0.009006] mce: CPU supports 6 MCE banks
[ 0.009013] CPU0: Thermal monitoring enabled (TM2)
[ 0.009018] using mwait in idle threads.
[ 0.009020] Performance Events: Core2 events, Intel PMU driver.
[ 0.009026] ... version: 2
[ 0.009027] ... bit width: 40
[ 0.009028] ... generic registers: 2
[ 0.009030] ... value mask: 000000ffffffffff
[ 0.009031] ... max period: 000000007fffffff
[ 0.009033] ... fixed-purpose events: 3
[ 0.009034] ... event mask: 0000000700000003
[ 0.010004] ACPI: Core revision 20090903
[ 0.024064] Setting APIC routing to flat
[ 0.024413] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.065405] CPU0: Intel Pentium(R) Dual-Core CPU T4500 @ 2.30GHz stepping 0a
[ 0.068001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 1024K
[ 0.008000] CPU 1/0x1 -> Node 0
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU1: Thermal monitoring enabled (TM2)
[ 0.152118] CPU1: Intel Pentium(R) Dual-Core CPU T4500 @ 2.30GHz stepping 0a
[ 0.152125] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.156017] Brought up 2 CPUs
[ 0.156019] Total of 2 processors activated (9177.47 BogoMIPS).
[ 0.156362] CPU0 attaching sched-domain:
[ 0.156366] domain 0: span 0-1 level MC
[ 0.156368] groups: 0 1
[ 0.156374] CPU1 attaching sched-domain:
[ 0.156375] domain 0: span 0-1 level MC
[ 0.156377] groups: 1 0
[ 0.156456] devtmpfs: initialized
[ 0.158761] regulator: core version 0.5
[ 0.158761] NET: Registered protocol family 16
[ 0.158761] ACPI: bus type pci registered
[ 0.158761] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[ 0.158761] PCI: MCFG area at f8000000 reserved in E820
[ 0.161852] PCI: Using MMCONFIG at f8000000 - fbffffff
[ 0.161853] PCI: Using configuration type 1 for base access
[ 0.162165] bio: create slab <bio-0> at 0
[ 0.162165] ACPI: EC: Look up EC in DSDT
[ 0.165576] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.167253] ACPI: BIOS _OSI(Linux) query ignored
[ 0.188008] ACPI Error (psargs-0359): [IF1] Namespace lookup failure, AE_NOT_FOUND
[ 0.188013] ACPI Error (psparse-0537): Method parse/execution failed [\FLNK] (Node ffff8800b723bb40), AE_NOT_FOUND
[ 0.188049] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPC_.LREG] (Node ffff8800b72443e0), AE_NOT_FOUND
[ 0.188089] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._INI] (Node ffff8800b723a980), AE_NOT_FOUND
[ 0.188138] ACPI Error: The DSDT has been corrupted or replaced - old, new headers below (20090903/tbutils-372)
[ 0.188142] ACPI: DSDT (null) 094DE (v01 TOSINV TOSINV00 00000001 MSFT 01000013)
[ 0.188149] ACPI: DSDT (null) 0555C (v01 TOSINV TOSINV00 00000001 INTL 20051117)
[ 0.188153] ACPI Error: Please send DMI info to linux-acpi@vger.kernel.org
[ 0.188154] If system does not work as expected, please boot with acpi=copy_dsdt (20090903/tbutils-378)
[ 0.188250] ACPI Error (psargs-0359): [IDA] Namespace lookup failure, AE_NOT_FOUND
[ 0.188254] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.P32_._PRW] (Node ffff8800b7243220), AE_NOT_FOUND
[ 0.188429] ACPI Warning for \_SB_.PCI0.AZAL._PRW: Return type mismatch - found Integer, expected Package (20090903/nspredef-1006)
[ 0.188433] ACPI Error (uteval-0307): Return object type is incorrect [\_SB_.PCI0.AZAL._PRW] (Node ffff8800b72472c0), AE_TYPE
[ 0.188443] ACPI Error: Type returned from _PRW was incorrect: Integer, expected Btypes: 8 (20090903/uteval-313)
[ 0.188509] ACPI: Interpreter enabled
[ 0.188511] ACPI: (supports S0ACPI Error (psargs-0359): [GPRW] Namespace lookup failure, AE_NOT_FOUND
[ 0.188529] ACPI Error (psparse-0537): Method parse/execution failed [\_GPE._L16] (Node ffff8800b723a160), AE_NOT_FOUND
[ 0.188574] ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L16] (20090903/evgpe-568)
[ 0.188597] S3 S4 S5)
[ 0.188619] ACPI: Using IOAPIC for interrupt routing
[ 0.188629] ACPI Error: Null stack entry at ffff8800b7316660 (20090903/exresop-175)
[ 0.188634] ACPI Error (psparse-0537): Method parse/execution failed [\_PIC] (Node ffff8800b723a180), AE_AML_INTERNAL
[ 0.188671] ACPI Exception: AE_AML_INTERNAL, Evaluating _PIC (20090903/bus-828)
[ 0.192382] =============================================================================
[ 0.192438] BUG Acpi-ParseExt: Objects remaining on kmem_cache_close()
[ 0.192488] -----------------------------------------------------------------------------
[ 0.192489]
[ 0.192585] INFO: Slab 0xffffea00028123d8 objects=56 used=1 fp=0xffff8800b72ed240 flags=0x100000000000080
[ 0.192641] Pid: 1, comm: swapper Not tainted 2.6.32-5-amd64 #1
[ 0.192643] Call Trace:
[ 0.192650] [<ffffffff810e423b>] ? slab_err+0xba/0xdf
[ 0.192654] [<ffffffff811c60c6>] ? acpi_os_vprintf+0x16/0x2c
[ 0.192657] [<ffffffff811c612a>] ? acpi_os_printf+0x4e/0x56
[ 0.192661] [<ffffffff8119404a>] ? vsnprintf+0x9e/0x449
[ 0.192665] [<ffffffff81074bcb>] ? generic_exec_single+0x64/0x80
[ 0.192668] [<ffffffff810e4c54>] ? flush_cpu_slab+0x0/0x39
[ 0.192671] [<ffffffff810e5299>] ? list_slab_objects+0xa3/0x16a
[ 0.192674] [<ffffffff810e3f1f>] ? add_partial+0x11/0x58
[ 0.192677] [<ffffffff810e4c3b>] ? deactivate_slab+0xb4/0xcd
[ 0.192680] [<ffffffff810e87e1>] ? kmem_cache_destroy+0x11d/0x20c
[ 0.192684] [<ffffffff81517d2f>] ? acpi_init+0x0/0x2de
[ 0.192687] [<ffffffff811c5936>] ? acpi_os_delete_cache+0x9/0xe
[ 0.192691] [<ffffffff811e51c2>] ? acpi_ut_delete_caches+0x6c/0x7b
[ 0.192694] [<ffffffff811e63b5>] ? acpi_terminate+0x41/0x4c
[ 0.192697] [<ffffffff81517f64>] ? acpi_init+0x235/0x2de
[ 0.192699] [<ffffffff81515bf3>] ? fbmem_init+0x0/0x98
[ 0.192703] [<ffffffff8100a065>] ? do_one_initcall+0x64/0x174
[ 0.192707] [<ffffffff814ef66b>] ? kernel_init+0x14c/0x1a2
[ 0.192711] [<ffffffff814ef140>] ? early_idt_handler+0x0/0x71
[ 0.192714] [<ffffffff81011baa>] ? child_rip+0xa/0x20
[ 0.192717] [<ffffffff814ef140>] ? early_idt_handler+0x0/0x71
[ 0.192720] [<ffffffff814ef51f>] ? kernel_init+0x0/0x1a2
[ 0.192722] [<ffffffff81011ba0>] ? child_rip+0x0/0x20
[ 0.192727] INFO: Object 0xffff8800b72ed288 @offset=648
[ 0.192776] =============================================================================
[ 0.192828] BUG Acpi-ParseExt: Objects remaining on kmem_cache_close()
[ 0.192875] -----------------------------------------------------------------------------
[ 0.192876]
[ 0.192972] INFO: Slab 0xffffea0002812170 objects=56 used=1 fp=0xffff8800b72e22d0 flags=0x100000000000080
[ 0.193027] Pid: 1, comm: swapper Not tainted 2.6.32-5-amd64 #1
[ 0.193029] Call Trace:
[ 0.193031] [<ffffffff810e423b>] ? slab_err+0xba/0xdf
[ 0.193034] [<ffffffff812f8e4e>] ? printk+0x4e/0x58
[ 0.193037] [<ffffffff8119404a>] ? vsnprintf+0x9e/0x449
[ 0.193040] [<ffffffff8101654b>] ? sched_clock+0x5/0x8
[ 0.193043] [<ffffffff81074bcb>] ? generic_exec_single+0x64/0x80
[ 0.193046] [<ffffffff810e4c54>] ? flush_cpu_slab+0x0/0x39
[ 0.193049] [<ffffffff810e5299>] ? list_slab_objects+0xa3/0x16a
[ 0.193052] [<ffffffff810e3f1f>] ? add_partial+0x11/0x58
[ 0.193055] [<ffffffff810e4c3b>] ? deactivate_slab+0xb4/0xcd
[ 0.193058] [<ffffffff810e87e1>] ? kmem_cache_destroy+0x11d/0x20c
[ 0.193061] [<ffffffff81517d2f>] ? acpi_init+0x0/0x2de
[ 0.193063] [<ffffffff811c5936>] ? acpi_os_delete_cache+0x9/0xe
[ 0.193066] [<ffffffff811e51c2>] ? acpi_ut_delete_caches+0x6c/0x7b
[ 0.193069] [<ffffffff811e63b5>] ? acpi_terminate+0x41/0x4c
[ 0.193072] [<ffffffff81517f64>] ? acpi_init+0x235/0x2de
[ 0.193074] [<ffffffff81515bf3>] ? fbmem_init+0x0/0x98
[ 0.193077] [<ffffffff8100a065>] ? do_one_initcall+0x64/0x174
[ 0.193080] [<ffffffff814ef66b>] ? kernel_init+0x14c/0x1a2
[ 0.193083] [<ffffffff814ef140>] ? early_idt_handler+0x0/0x71
[ 0.193085] [<ffffffff81011baa>] ? child_rip+0xa/0x20
[ 0.193088] [<ffffffff814ef140>] ? early_idt_handler+0x0/0x71
[ 0.193091] [<ffffffff814ef51f>] ? kernel_init+0x0/0x1a2
[ 0.193094] [<ffffffff81011ba0>] ? child_rip+0x0/0x20
[ 0.193098] INFO: Object 0xffff8800b72e21b0 @offset=432
[ 0.193147] SLUB Acpi-ParseExt: kmem_cache_destroy called for cache that still has objects.
[ 0.193201] Pid: 1, comm: swapper Not tainted 2.6.32-5-amd64 #1
[ 0.193202] Call Trace:
[ 0.193205] [<ffffffff810e8878>] ? kmem_cache_destroy+0x1b4/0x20c
[ 0.193208] [<ffffffff81517d2f>] ? acpi_init+0x0/0x2de
[ 0.193211] [<ffffffff811c5936>] ? acpi_os_delete_cache+0x9/0xe
[ 0.193214] [<ffffffff811e51c2>] ? acpi_ut_delete_caches+0x6c/0x7b
[ 0.193216] [<ffffffff811e63b5>] ? acpi_terminate+0x41/0x4c
[ 0.193219] [<ffffffff81517f64>] ? acpi_init+0x235/0x2de
[ 0.193222] [<ffffffff81515bf3>] ? fbmem_init+0x0/0x98
[ 0.193224] [<ffffffff8100a065>] ? do_one_initcall+0x64/0x174
[ 0.193227] [<ffffffff814ef66b>] ? kernel_init+0x14c/0x1a2
[ 0.193230] [<ffffffff814ef140>] ? early_idt_handler+0x0/0x71
[ 0.193233] [<ffffffff81011baa>] ? child_rip+0xa/0x20
[ 0.193236] [<ffffffff814ef140>] ? early_idt_handler+0x0/0x71
[ 0.193239] [<ffffffff814ef51f>] ? kernel_init+0x0/0x1a2
[ 0.193241] [<ffffffff81011ba0>] ? child_rip+0x0/0x20
[ 0.193243] ------------[ cut here ]------------
[ 0.193246] WARNING: at /tmp/buildd/linux-2.6-2.6.32/debian/build/source_amd64_none/lib/kobject.c:595 kobject_put+0x2f/0x42()
[ 0.193248] Hardware name: Satellite C650
[ 0.193250] kobject: '<NULL>' (ffff8800b722a4a8): is not initialized, yet kobject_put() is being called.
[ 0.193252] Modules linked in:
[ 0.193254] Pid: 1, comm: swapper Not tainted 2.6.32-5-amd64 #1
[ 0.193256] Call Trace:
[ 0.193258] [<ffffffff8118ea6b>] ? kobject_put+0x2f/0x42
[ 0.193260] [<ffffffff8118ea6b>] ? kobject_put+0x2f/0x42
[ 0.193264] [<ffffffff8104db34>] ? warn_slowpath_common+0x77/0xa3
[ 0.193266] [<ffffffff81517d2f>] ? acpi_init+0x0/0x2de
[ 0.193269] [<ffffffff8104dbbc>] ? warn_slowpath_fmt+0x51/0x59
[ 0.193272] [<ffffffff8113f725>] ? sysfs_remove_dir+0x1b/0x76
[ 0.193275] [<ffffffff8118eaf9>] ? kobject_del+0x23/0x2d
[ 0.193278] [<ffffffff810e88a3>] ? kmem_cache_destroy+0x1df/0x20c
[ 0.193281] [<ffffffff81517d2f>] ? acpi_init+0x0/0x2de
[ 0.193283] [<ffffffff8118ea6b>] ? kobject_put+0x2f/0x42
[ 0.193286] [<ffffffff811c5936>] ? acpi_os_delete_cache+0x9/0xe
[ 0.193289] [<ffffffff811e51c2>] ? acpi_ut_delete_caches+0x6c/0x7b
[ 0.193291] [<ffffffff811e63b5>] ? acpi_terminate+0x41/0x4c
[ 0.193294] [<ffffffff81517f64>] ? acpi_init+0x235/0x2de
[ 0.193297] [<ffffffff81515bf3>] ? fbmem_init+0x0/0x98
[ 0.193299] [<ffffffff8100a065>] ? do_one_initcall+0x64/0x174
[ 0.193302] [<ffffffff814ef66b>] ? kernel_init+0x14c/0x1a2
[ 0.193305] [<ffffffff814ef140>] ? early_idt_handler+0x0/0x71
[ 0.193308] [<ffffffff81011baa>] ? child_rip+0xa/0x20
[ 0.193311] [<ffffffff814ef140>] ? early_idt_handler+0x0/0x71
[ 0.193314] [<ffffffff814ef51f>] ? kernel_init+0x0/0x1a2
[ 0.193316] [<ffffffff81011ba0>] ? child_rip+0x0/0x20
[ 0.193322] ---[ end trace 93d72a36b9146f22 ]---
[ 0.193407] vgaarb: loaded
[ 0.193431] PCI: Probing PCI hardware
[ 0.193431] PCI: Probing PCI hardware (bus 00)
[ 0.193431] DMAR: Forcing write-buffer flush capability
[ 0.193431] pci 0000:00:02.0: reg 10 64bit mmio: [0xd0000000-0xd03fffff]
[ 0.193431] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xc0000000-0xcfffffff]
[ 0.193431] pci 0000:00:02.0: reg 20 io port: [0x5110-0x5117]
[ 0.193431] pci 0000:00:02.1: reg 10 64bit mmio: [0xd3400000-0xd34fffff]
[ 0.193431] pci 0000:00:1a.0: reg 20 io port: [0x50e0-0x50ff]
[ 0.193431] pci 0000:00:1a.1: reg 20 io port: [0x50c0-0x50df]
[ 0.193431] pci 0000:00:1a.7: reg 10 32bit mmio: [0xd6704c00-0xd6704fff]
[ 0.193431] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.193431] pci 0000:00:1a.7: PME# disabled
[ 0.193431] pci 0000:00:1b.0: reg 10 64bit mmio: [0xd6700000-0xd6703fff]
[ 0.193431] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.193431] pci 0000:00:1b.0: PME# disabled
[ 0.193431] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.193431] pci 0000:00:1c.0: PME# disabled
[ 0.193431] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.193431] pci 0000:00:1c.1: PME# disabled
[ 0.193431] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.193431] pci 0000:00:1c.4: PME# disabled
[ 0.193431] pci 0000:00:1d.0: reg 20 io port: [0x50a0-0x50bf]
[ 0.193431] pci 0000:00:1d.1: reg 20 io port: [0x5080-0x509f]
[ 0.193431] pci 0000:00:1d.2: reg 20 io port: [0x5060-0x507f]
[ 0.193431] pci 0000:00:1d.3: reg 20 io port: [0x5040-0x505f]
[ 0.193520] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd6704800-0xd6704bff]
[ 0.193596] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.196007] pci 0000:00:1d.7: PME# disabled
[ 0.196237] pci 0000:00:1f.2: reg 10 io port: [0x5108-0x510f]
[ 0.196243] pci 0000:00:1f.2: reg 14 io port: [0x511c-0x511f]
[ 0.196250] pci 0000:00:1f.2: reg 18 io port: [0x5100-0x5107]
[ 0.196257] pci 0000:00:1f.2: reg 1c io port: [0x5118-0x511b]
[ 0.196263] pci 0000:00:1f.2: reg 20 io port: [0x5020-0x503f]
[ 0.196270] pci 0000:00:1f.2: reg 24 32bit mmio: [0xd6704000-0xd67047ff]
[ 0.196310] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.196314] pci 0000:00:1f.2: PME# disabled
[ 0.196349] pci 0000:00:1f.3: reg 10 64bit mmio: [0xd6705000-0xd67050ff]
[ 0.196366] pci 0000:00:1f.3: reg 20 io port: [0x5000-0x501f]
[ 0.196458] pci 0000:02:00.0: reg 10 64bit mmio: [0xd5600000-0xd563ffff]
[ 0.196467] pci 0000:02:00.0: reg 18 io port: [0x3000-0x307f]
[ 0.196549] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.196555] pci 0000:02:00.0: PME# disabled
[ 0.196598] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.196686] pci 0000:00:1c.0: bridge io port: [0x3000-0x4fff]
[ 0.196691] pci 0000:00:1c.0: bridge 32bit mmio: [0xd5600000-0xd66fffff]
[ 0.196697] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xd0400000-0xd13fffff]
[ 0.196760] pci 0000:03:00.0: reg 10 64bit mmio: [0xd4500000-0xd450ffff]
[ 0.196834] pci 0000:03:00.0: supports D1
[ 0.196836] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 0.196841] pci 0000:03:00.0: PME# disabled
[ 0.204101] pci 0000:00:1c.1: bridge io port: [0x2000-0x2fff]
[ 0.204105] pci 0000:00:1c.1: bridge 32bit mmio: [0xd4500000-0xd55fffff]
[ 0.204112] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xd1400000-0xd23fffff]
[ 0.204165] pci 0000:00:1c.4: bridge io port: [0x1000-0x1fff]
[ 0.204169] pci 0000:00:1c.4: bridge 32bit mmio: [0xd3500000-0xd44fffff]
[ 0.204176] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xd2400000-0xd33fffff]
[ 0.204235] pci 0000:00:1e.0: transparent bridge
[ 0.204299] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.204747] PCI: Discovered primary peer bus ff [IRQ]
[ 0.204762] pci 0000:00:1f.0: PIIX/ICH IRQ router [8086:2919]
[ 0.204946] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.204950] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.208016] Switching to clocksource tsc
[ 0.209110] pnp: PnP ACPI: disabled
[ 0.213864] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.213868] pci 0000:00:1c.0: IO window: 0x3000-0x4fff
[ 0.213873] pci 0000:00:1c.0: MEM window: 0xd5600000-0xd66fffff
[ 0.213878] pci 0000:00:1c.0: PREFETCH window: 0x000000d0400000-0x000000d13fffff
[ 0.213885] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.213889] pci 0000:00:1c.1: IO window: 0x2000-0x2fff
[ 0.213894] pci 0000:00:1c.1: MEM window: 0xd4500000-0xd55fffff
[ 0.213898] pci 0000:00:1c.1: PREFETCH window: 0x000000d1400000-0x000000d23fffff
[ 0.213905] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:07
[ 0.213908] pci 0000:00:1c.4: IO window: 0x1000-0x1fff
[ 0.213913] pci 0000:00:1c.4: MEM window: 0xd3500000-0xd44fffff
[ 0.213918] pci 0000:00:1c.4: PREFETCH window: 0x000000d2400000-0x000000d33fffff
[ 0.213924] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 0.213926] pci 0000:00:1e.0: IO window: disabled
[ 0.213931] pci 0000:00:1e.0: MEM window: disabled
[ 0.213935] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.213951] pci 0000:00:1c.0: can't find IRQ for PCI INT A; probably buggy MP table
[ 0.213957] pci 0000:00:1c.0: setting latency timer to 64
[ 0.213968] pci 0000:00:1c.1: can't find IRQ for PCI INT B; probably buggy MP table
[ 0.213972] pci 0000:00:1c.1: setting latency timer to 64
[ 0.213980] pci 0000:00:1c.4: enabling device (0000 -> 0003)
[ 0.213985] pci 0000:00:1c.4: can't find IRQ for PCI INT A; probably buggy MP table
[ 0.213991] pci 0000:00:1c.4: setting latency timer to 64
[ 0.213999] pci 0000:00:1e.0: setting latency timer to 64
[ 0.214003] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.214006] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.214008] pci_bus 0000:02: resource 0 io: [0x3000-0x4fff]
[ 0.214010] pci_bus 0000:02: resource 1 mem: [0xd5600000-0xd66fffff]
[ 0.214012] pci_bus 0000:02: resource 2 pref mem [0xd0400000-0xd13fffff]
[ 0.214015] pci_bus 0000:03: resource 0 io: [0x2000-0x2fff]
[ 0.214017] pci_bus 0000:03: resource 1 mem: [0xd4500000-0xd55fffff]
[ 0.214019] pci_bus 0000:03: resource 2 pref mem [0xd1400000-0xd23fffff]
[ 0.214021] pci_bus 0000:07: resource 0 io: [0x1000-0x1fff]
[ 0.214023] pci_bus 0000:07: resource 1 mem: [0xd3500000-0xd44fffff]
[ 0.214025] pci_bus 0000:07: resource 2 pref mem [0xd2400000-0xd33fffff]
[ 0.214028] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
[ 0.214030] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.214032] pci_bus 0000:ff: resource 0 io: [0x00-0xffff]
[ 0.214035] pci_bus 0000:ff: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.214063] NET: Registered protocol family 2
[ 0.214215] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.215465] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.220153] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.220713] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.220717] TCP reno registered
[ 0.220859] NET: Registered protocol family 1
[ 0.220881] pci 0000:00:02.0: Boot video device
[ 1.820005] pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 3.420005] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 3.420171] Unpacking initramfs...
[ 3.610953] Freeing initrd memory: 8803k freed
[ 3.615321] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[ 3.615324] Simple Boot Flag at 0x44 set to 0x1
[ 3.615360] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 3.615643] audit: initializing netlink socket (disabled)
[ 3.615657] type=2000 audit(1285522573.612:1): initialized
[ 3.618580] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 3.619663] SLUB: Unable to add boot slab alias <NULL> to sysfs
[ 3.619815] VFS: Disk quotas dquot_6.5.2
[ 3.619864] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.619930] msgmni has been set to 5781
[ 3.620120] alg: No test for stdrng (krng)
[ 3.620164] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 3.620167] io scheduler noop registered
[ 3.620168] io scheduler anticipatory registered
[ 3.620170] io scheduler deadline registered
[ 3.620197] io scheduler cfq registered (default)
[ 3.620323] alloc irq_desc for 24 on node -1
[ 3.620325] alloc kstat_irqs on node -1
[ 3.620338] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 3.620349] pcieport 0000:00:1c.0: setting latency timer to 64
[ 3.620496] alloc irq_desc for 25 on node -1
[ 3.620497] alloc kstat_irqs on node -1
[ 3.620506] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 3.620516] pcieport 0000:00:1c.1: setting latency timer to 64
[ 3.620655] alloc irq_desc for 26 on node -1
[ 3.620656] alloc kstat_irqs on node -1
[ 3.620664] pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X
[ 3.620674] pcieport 0000:00:1c.4: setting latency timer to 64
[ 3.621891] Linux agpgart interface v0.103
[ 3.621904] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset
[ 3.622296] agpgart-intel 0000:00:00.0: detected 131068K stolen memory
[ 3.647368] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 3.647411] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.647626] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 3.647675] PNP: No PS/2 controller found. Probing ports directly.
[ 3.674794] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.674799] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.674868] mice: PS/2 mouse device common for all mice
[ 3.674929] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 3.674962] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[ 3.674969] cpuidle: using governor ladder
[ 3.674971] cpuidle: using governor menu
[ 3.674974] No iBFT detected.
[ 3.675243] TCP cubic registered
[ 3.675335] NET: Registered protocol family 10
[ 3.675729] lo: Disabled Privacy Extensions
[ 3.675964] Mobile IPv6
[ 3.675966] NET: Registered protocol family 17
[ 3.676059] PM: Resume from disk failed.
[ 3.676069] registered taskstats version 1
[ 3.676537] rtc_cmos rtc_cmos: setting system clock to 2010-09-26 17:36:13 UTC (1285522573)
[ 3.676584] Initalizing network drop monitor service
[ 3.676607] Freeing unused kernel memory: 584k freed
[ 3.676787] Write protecting the kernel read-only data: 4216k
[ 3.691110] udev: starting version 160
[ 3.706506] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 3.736453] usbcore: registered new interface driver usbfs
[ 3.736477] usbcore: registered new interface driver hub
[ 3.736819] usbcore: registered new device driver usb
[ 3.742638] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.742675] ehci_hcd 0000:00:1a.7: can't find IRQ for PCI INT D; probably buggy MP table
[ 3.742690] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 3.742694] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 3.742716] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 3.742747] ehci_hcd 0000:00:1a.7: debug port 1
[ 3.743949] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.744581] SCSI subsystem initialized
[ 3.746643] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 3.747623] ehci_hcd 0000:00:1a.7: irq 11, io mem 0xd6704c00
[ 3.756491] libata version 3.00 loaded.
[ 3.760513] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 3.760539] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.760542] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.760544] usb usb1: Product: EHCI Host Controller
[ 3.760546] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 3.760548] usb usb1: SerialNumber: 0000:00:1a.7
[ 3.760624] usb usb1: configuration #1 chosen from 1 choice
[ 3.760651] hub 1-0:1.0: USB hub found
[ 3.760658] hub 1-0:1.0: 4 ports detected
[ 3.760723] uhci_hcd 0000:00:1a.0: can't find IRQ for PCI INT A; probably buggy MP table
[ 3.760733] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 3.760737] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 3.760744] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
[ 3.760774] uhci_hcd 0000:00:1a.0: irq 11, io base 0x000050e0
[ 3.760806] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.760808] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.760810] usb usb2: Product: UHCI Host Controller
[ 3.760812] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 3.760814] usb usb2: SerialNumber: 0000:00:1a.0
[ 3.760865] usb usb2: configuration #1 chosen from 1 choice
[ 3.760891] hub 2-0:1.0: USB hub found
[ 3.760897] hub 2-0:1.0: 2 ports detected
[ 3.760945] ahci 0000:00:1f.2: version 3.0
[ 3.760958] ahci 0000:00:1f.2: can't find IRQ for PCI INT B; probably buggy MP table
[ 3.760996] alloc irq_desc for 27 on node -1
[ 3.760998] alloc kstat_irqs on node -1
[ 3.761010] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
[ 3.761087] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 3.761091] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part ccc sxs
[ 3.761096] ahci 0000:00:1f.2: setting latency timer to 64
[ 3.761347] scsi0 : ahci
[ 3.761455] scsi1 : ahci
[ 3.761514] scsi2 : ahci
[ 3.761579] scsi3 : ahci
[ 3.761628] scsi4 : ahci
[ 3.761680] scsi5 : ahci
[ 3.761722] ata1: SATA max UDMA/133 abar m2048@0xd6704000 port 0xd6704100 irq 27
[ 3.761725] ata2: SATA max UDMA/133 abar m2048@0xd6704000 port 0xd6704180 irq 27
[ 3.761727] ata3: DUMMY
[ 3.761729] ata4: DUMMY
[ 3.761731] ata5: SATA max UDMA/133 abar m2048@0xd6704000 port 0xd6704300 irq 27
[ 3.761735] ata6: SATA max UDMA/133 abar m2048@0xd6704000 port 0xd6704380 irq 27
[ 3.761796] ehci_hcd 0000:00:1d.7: can't find IRQ for PCI INT A; probably buggy MP table
[ 3.761826] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.761830] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.761845] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
[ 3.761884] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.765774] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 3.765781] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xd6704800
[ 3.784008] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.784029] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.784032] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.784034] usb usb3: Product: EHCI Host Controller
[ 3.784035] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 3.784037] usb usb3: SerialNumber: 0000:00:1d.7
[ 3.784114] usb usb3: configuration #1 chosen from 1 choice
[ 3.784141] hub 3-0:1.0: USB hub found
[ 3.784149] hub 3-0:1.0: 8 ports detected
[ 3.784221] uhci_hcd 0000:00:1a.1: can't find IRQ for PCI INT B; probably buggy MP table
[ 3.784229] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 3.784233] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 3.784241] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 3.784279] uhci_hcd 0000:00:1a.1: irq 10, io base 0x000050c0
[ 3.784313] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.784315] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.784317] usb usb4: Product: UHCI Host Controller
[ 3.784319] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 3.784321] usb usb4: SerialNumber: 0000:00:1a.1
[ 3.784372] usb usb4: configuration #1 chosen from 1 choice
[ 3.784400] hub 4-0:1.0: USB hub found
[ 3.784406] hub 4-0:1.0: 2 ports detected
[ 3.784453] uhci_hcd 0000:00:1d.0: can't find IRQ for PCI INT A; probably buggy MP table
[ 3.784459] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.784462] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.784469] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 3.784496] uhci_hcd 0000:00:1d.0: irq 11, io base 0x000050a0
[ 3.784532] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.784534] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.784536] usb usb5: Product: UHCI Host Controller
[ 3.784538] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 3.784540] usb usb5: SerialNumber: 0000:00:1d.0
[ 3.784592] usb usb5: configuration #1 chosen from 1 choice
[ 3.784615] hub 5-0:1.0: USB hub found
[ 3.784621] hub 5-0:1.0: 2 ports detected
[ 3.784668] uhci_hcd 0000:00:1d.1: can't find IRQ for PCI INT B; probably buggy MP table
[ 3.784675] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.784678] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.784684] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 3.784711] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00005080
[ 3.784746] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.784748] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.784750] usb usb6: Product: UHCI Host Controller
[ 3.784752] usb usb6: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 3.784754] usb usb6: SerialNumber: 0000:00:1d.1
[ 3.784805] usb usb6: configuration #1 chosen from 1 choice
[ 3.784831] hub 6-0:1.0: USB hub found
[ 3.784837] hub 6-0:1.0: 2 ports detected
[ 3.784882] uhci_hcd 0000:00:1d.2: can't find IRQ for PCI INT D; probably buggy MP table
[ 3.784888] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.784892] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.784898] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 3.784925] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00005060
[ 3.784956] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.784959] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.784961] usb usb7: Product: UHCI Host Controller
[ 3.784962] usb usb7: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 3.784964] usb usb7: SerialNumber: 0000:00:1d.2
[ 3.785015] usb usb7: configuration #1 chosen from 1 choice
[ 3.785040] hub 7-0:1.0: USB hub found
[ 3.785046] hub 7-0:1.0: 2 ports detected
[ 3.785091] uhci_hcd 0000:00:1d.3: can't find IRQ for PCI INT C; probably buggy MP table
[ 3.785097] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 3.785100] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.785106] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[ 3.785133] uhci_hcd 0000:00:1d.3: irq 11, io base 0x00005040
[ 3.785164] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.785167] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.785169] usb usb8: Product: UHCI Host Controller
[ 3.785170] usb usb8: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 3.785172] usb usb8: SerialNumber: 0000:00:1d.3
[ 3.785222] usb usb8: configuration #1 chosen from 1 choice
[ 3.785246] hub 8-0:1.0: USB hub found
[ 3.785252] hub 8-0:1.0: 2 ports detected
[ 4.072510] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 4.080018] ata1: SATA link down (SStatus 0 SControl 300)
[ 4.080059] ata5: SATA link down (SStatus 0 SControl 300)
[ 4.248016] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.252014] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.275899] ata6.00: ATAPI: TSSTcorp CDDVDW TS-L633C, TF20, max UDMA/100
[ 4.296216] ata6.00: configured for UDMA/100
[ 4.301706] ata2.00: ATA-8: TOSHIBA MK3265GSX, GJ003M, max UDMA/100
[ 4.301709] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 4.302429] ata2.00: configured for UDMA/100
[ 4.302521] scsi 1:0:0:0: Direct-Access ATA TOSHIBA MK3265GS GJ00 PQ: 0 ANSI: 5
[ 4.304552] scsi 5:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633C TF20 PQ: 0 ANSI: 5
[ 4.315165] sd 1:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 4.315214] sd 1:0:0:0: [sda] Write Protect is off
[ 4.315217] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.315237] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.315371] sda:sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.317765] Uniform CD-ROM driver Revision: 3.20
[ 4.317850] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 4.365057] sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 4.425206] sd 1:0:0:0: [sda] Attached SCSI disk
[ 4.429225] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 4.429604] sr 5:0:0:0: Attached scsi generic sg1 type 5
[ 5.274073] PM: Starting manual resume from disk
[ 5.274077] PM: Resume from partition 8:6
[ 5.274078] PM: Checking hibernation image.
[ 5.302387] PM: Error -22 checking image file
[ 5.302389] PM: Resume from disk failed.
[ 5.363798] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 9.072512] ehci_hcd 0000:00:1a.7: Unlink after no-IRQ? Controller is probably using the wrong IRQ.
[ 9.861242] udev: starting version 160
[ 10.067586] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 10.089813] i801_smbus 0000:00:1f.3: can't find IRQ for PCI INT C; probably buggy MP table
[ 10.223965] cfg80211: Using static regulatory domain info
[ 10.223968] cfg80211: Regulatory domain: US
[ 10.223969] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 10.223972] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 10.223975] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 10.223977] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 10.223979] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 10.223982] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 10.223984] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 10.223993] cfg80211: Calling CRDA for country: US
[ 10.504066] ath9k 0000:03:00.0: can't find IRQ for PCI INT A; probably buggy MP table
[ 10.504082] ath9k 0000:03:00.0: setting latency timer to 64
[ 10.553765] ath: EEPROM regdomain: 0x65
[ 10.553767] ath: EEPROM indicates we should expect a direct regpair map
[ 10.553771] ath: Country alpha2 being used: 00
[ 10.553772] ath: Regpair used: 0x65
[ 10.715198] phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 10.715732] Registered led device: ath9k-phy0::radio
[ 10.715746] Registered led device: ath9k-phy0::assoc
[ 10.715760] Registered led device: ath9k-phy0::tx
[ 10.715775] Registered led device: ath9k-phy0::rx
[ 10.715786] phy0: Atheros AR9285 MAC/BB Rev:2 AR5133 RF Rev:e0: mem=0xffffc90005680000, irq=11
[ 10.975999] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000
[ 11.036759] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input3
[ 11.301377] HDA Intel 0000:00:1b.0: can't find IRQ for PCI INT A; probably buggy MP table
[ 11.301410] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 12.336005] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x000f0000
[ 19.628008] usb 1-2: device not accepting address 2, error -110
[ 19.740010] usb 1-2: new high speed USB device using ehci_hcd and address 3
[ 35.296009] usb 1-2: device not accepting address 3, error -110
[ 35.408010] usb 1-2: new high speed USB device using ehci_hcd and address 4
[ 45.840009] usb 1-2: device not accepting address 4, error -110
[ 45.952010] usb 1-2: new high speed USB device using ehci_hcd and address 5
[ 56.384008] usb 1-2: device not accepting address 5, error -110
[ 56.384087] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 56.520010] usb 1-3: new high speed USB device using ehci_hcd and address 6
[ 72.076008] usb 1-3: device not accepting address 6, error -110
[ 72.188010] usb 1-3: new high speed USB device using ehci_hcd and address 7
[ 87.744008] usb 1-3: device not accepting address 7, error -110
[ 87.856021] usb 1-3: new high speed USB device using ehci_hcd and address 8
[ 98.288008] usb 1-3: device not accepting address 8, error -110
[ 98.400011] usb 1-3: new high speed USB device using ehci_hcd and address 9
[ 108.832007] usb 1-3: device not accepting address 9, error -110
[ 108.832087] hub 1-0:1.0: unable to enumerate USB device on port 3
[ 109.470550] Adding 3317380k swap on /dev/sda6. Priority:-1 extents:1 across:3317380k
[ 109.882909] loop: module loaded
[ 110.747054] EXT4-fs (sda7): mounted filesystem with ordered data mode
[ 111.121408] fuse init (API version 7.13)
[ 111.970348] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 112.429363] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input4
Reply to: