Bug#575054: Further info
Hi Brice,
When I boot up the computer this morning, everything looks the same
till kdm. The screen just went blank when X tried to run. Please check
the output of dmesg, I don't know if it's got to do with the same bug,
or if it's the kernel module that's actually causing it...
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-3-686 (Debian 2.6.32-9)
(maks@debian.org) (gcc version 4.3.4 (Debian 4.3.4-8) ) #1 SMP Thu Feb
25 06:14:20 UTC 2010 [ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000
(reserved) [ 0.000000] BIOS-e820: 00000000000d8000 -
0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000
- 000000007fe80000 (usable) [ 0.000000] BIOS-e820: 000000007fe80000
- 000000007fe8b000 (ACPI data) [ 0.000000] BIOS-e820:
000000007fe8b000 - 000000007ff00000 (ACPI NVS) [ 0.000000]
BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0006000
(reserved) [ 0.000000] BIOS-e820: 00000000f0008000 -
00000000f000c000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000
- 00000000fed90000 (reserved) [ 0.000000] BIOS-e820:
00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] DMI
present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low
RAM, working around it. [ 0.000000] e820 update range:
0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x7fe80 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed
ranges enabled: [ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF
write-protect [ 0.000000] D0000-E3FFF uncachable
[ 0.000000] E4000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037000000 page 2M
[ 0.000000] 0037000000 - 00373fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[ 0.000000] RAMDISK: 3775e000 - 37feff55
[ 0.000000] Allocated new RAMDISK: 00100000 - 00991f55
[ 0.000000] Move RAMDISK from 000000003775e000 - 0000000037feff54 to
00100000 - 00991f54 [ 0.000000] ACPI: RSDP 000f63b0 00014 (v00
PTLTD ) [ 0.000000] ACPI: RSDT 7fe84334 00040 (v01 SONY X5
06040000 LTP 00000000) [ 0.000000] ACPI: FACP 7fe8aeb0 00084 (v02
SONY X5 06040000 LOHR 20050429) [ 0.000000] ACPI: DSDT
7fe84b78 06338 (v01 SONY X5 06040000 MSFT 02000001)
[ 0.000000] ACPI: FACS 7fe9bfc0 00040 [ 0.000000] ACPI: APIC
7fe8af34 00068 (v01 INTEL ALVISO 06040000 LOHR 0000005F)
[ 0.000000] ACPI: MCFG 7fe8af9c 0003C (v01 INTEL ALVISO 06040000
LOHR 0000005F) [ 0.000000] ACPI: BOOT 7fe8afd8 00028 (v01 PTLTD
$SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: SSDT 7fe84733
00277 (v01 PmRef Cpu0Ist 00003000 INTL 20030224) [ 0.000000] ACPI:
SSDT 7fe8458d 001A6 (v01 PmRef Cpu0Cst 00003001 INTL 20030224)
[ 0.000000] ACPI: SSDT 7fe84374 00219 (v01 PmRef CpuPm 00003000
INTL 20030224) [ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1162MB HIGHMEM available. [ 0.000000] 883MB LOWMEM
available. [ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 0 - 373fe000 [ 0.000000] node 0 low ram:
00000000 - 373fe000 [ 0.000000] node 0 bootmap 00012000 - 00018e80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 -
00373fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data
page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 -
0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==>
[0000006000 - 0000007000] [ 0.000000] #3 [0001000000 -
00014a9314] TEXT DATA BSS ==> [0001000000 - 00014a9314]
[ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==>
[000009f800 - 0000100000] [ 0.000000] #5 [00014aa000 -
00014b01bc] BRK ==> [00014aa000 - 00014b01bc]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==>
[0000010000 - 0000012000] [ 0.000000] #7 [0000100000 -
0000991f55] NEW RAMDISK ==> [0000100000 - 0000991f55]
[ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==>
[0000012000 - 0000019000] [ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000]
Normal 0x00001000 -> 0x000373fe [ 0.000000] HighMem 0x000373fe
-> 0x0007fe80 [ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges [ 0.000000]
0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 ->
0x0007fe80 [ 0.000000] On node 0 totalpages: 523791 [ 0.000000]
free_area_init_node: node 0, pgdat c1396fc0, node_mem_map c14b2200
[ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000]
DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO
batch:0 [ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2326 pages used for memmap
[ 0.000000] HighMem zone: 295276 pages, LIFO batch:31
[ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer
IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000,
GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2
dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9
high level) [ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000 [ 0.000000] PM: Registered nosave memory:
00000000000a0000 - 00000000000d8000 [ 0.000000] PM: Registered
nosave memory: 00000000000d8000 - 0000000000100000 [ 0.000000]
Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2800000 s34072 r0 d23272
u2097152 [ 0.000000] pcpu-alloc: s34072 r0 d23272 u2097152
alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built
1 zonelists in Zone order, mobility grouping on. Total pages: 519697
[ 0.000000] Kernel command line: root=/dev/sdb3 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7,
524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536
(order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and
restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception
support... done. [ 0.000000] Initializing CPU#0 [ 0.000000]
Initializing HighMem for node 0 (000373fe:0007fe80) [ 0.000000]
Memory: 2063216k/2095616k available (2429k kernel code, 30940k
reserved, 1284k data, 368k init, 1190408k highmem) [ 0.000000]
virtual kernel memory layout: [ 0.000000] fixmap : 0xffd56000 -
0xfffff000 (2724 kB) [ 0.000000] pkmap : 0xff400000 -
0xff800000 (4096 kB) [ 0.000000] vmalloc : 0xf7bfe000 -
0xff3fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 -
0xf73fe000 ( 883 MB) [ 0.000000] .init : 0xc13a1000 -
0xc13fd000 ( 368 kB) [ 0.000000] .data : 0xc125f44d -
0xc13a0760 (1284 kB) [ 0.000000] .text : 0xc1000000 -
0xc125f44d (2429 kB) [ 0.000000] Checking if this processor
honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB:
Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation. [ 0.000000]
NR_IRQS:1280 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000]
console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1995.280 MHz processor.
[ 0.004007] Calibrating delay loop (skipped), value calculated using
timer frequency.. 3990.56 BogoMIPS (lpj=7981120) [ 0.004029]
Security Framework initialized [ 0.004037] SELinux: Disabled at
boot. [ 0.004046] Mount-cache hash table entries: 512
[ 0.004211] Initializing cgroup subsys ns
[ 0.004216] Initializing cgroup subsys cpuacct
[ 0.004220] Initializing cgroup subsys devices
[ 0.004222] Initializing cgroup subsys freezer
[ 0.004225] Initializing cgroup subsys net_cls
[ 0.004252] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004254] CPU: L2 cache: 2048K
[ 0.004259] mce: CPU supports 5 MCE banks
[ 0.004271] CPU0: Thermal monitoring enabled (TM2)
[ 0.004283] Performance Events: p6 PMU driver.
[ 0.004290] ... version: 0
[ 0.004292] ... bit width: 32
[ 0.004293] ... generic registers: 2
[ 0.004295] ... value mask: 00000000ffffffff
[ 0.004297] ... max period: 000000007fffffff
[ 0.004299] ... fixed-purpose events: 0
[ 0.004301] ... event mask: 0000000000000003
[ 0.004306] Checking 'hlt' instruction... OK.
[ 0.020345] SMP alternatives: switching to UP code
[ 0.023720] ACPI: Core revision 20090903
[ 0.034159] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.073854] CPU0: Intel(R) Pentium(R) M processor 2.00GHz stepping 08
[ 0.076001] Brought up 1 CPUs
[ 0.076001] Total of 1 processors activated (3990.56 BogoMIPS).
[ 0.076001] CPU0 attaching NULL sched-domain.
[ 0.076001] devtmpfs: initialized
[ 0.076001] regulator: core version 0.5
[ 0.076001] NET: Registered protocol family 16
[ 0.076001] ACPI: bus type pci registered
[ 0.076001] PCI: MCFG configuration 0: base e0000000 segment 0 buses
0 - 255 [ 0.076001] PCI: MCFG area at e0000000 reserved in E820
[ 0.076001] PCI: Using MMCONFIG for extended config space
[ 0.076001] PCI: Using configuration type 1 for base access
[ 0.076001] bio: create slab <bio-0> at 0
[ 0.076001] ACPI: EC: Look up EC in DSDT
[ 0.076221] ACPI: EC: GPE storm detected, transactions will use
polling mode [ 0.092203] ACPI: Interpreter enabled
[ 0.092214] ACPI: (supports S0 S3 S4 S5)
[ 0.092233] ACPI: Using IOAPIC for interrupt routing
[ 0.095860] ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data =
0x62 [ 0.096283] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 0.096817] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.096913] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.096917] pci 0000:00:01.0: PME# disabled
[ 0.096997] pci 0000:00:1b.0: reg 10 64bit mmio:
[0xb8000000-0xb8003fff] [ 0.097052] pci 0000:00:1b.0: PME# supported
from D0 D3hot D3cold [ 0.097057] pci 0000:00:1b.0: PME# disabled
[ 0.097141] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.097146] pci 0000:00:1c.0: PME# disabled
[ 0.097233] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.097238] pci 0000:00:1c.1: PME# disabled
[ 0.097300] pci 0000:00:1d.0: reg 20 io port: [0x4800-0x481f]
[ 0.097359] pci 0000:00:1d.1: reg 20 io port: [0x4820-0x483f]
[ 0.097417] pci 0000:00:1d.2: reg 20 io port: [0x4840-0x485f]
[ 0.097477] pci 0000:00:1d.3: reg 20 io port: [0x4860-0x487f]
[ 0.097539] pci 0000:00:1d.7: reg 10 32bit mmio:
[0xb8004000-0xb80043ff] [ 0.097596] pci 0000:00:1d.7: PME# supported
from D0 D3hot D3cold [ 0.097602] pci 0000:00:1d.7: PME# disabled
[ 0.097750] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.097756] pci 0000:00:1f.0: quirk: region 1000-107f claimed by
ICH6 ACPI/GPIO/TCO [ 0.097761] pci 0000:00:1f.0: quirk: region
1180-11bf claimed by ICH6 GPIO [ 0.097765] pci 0000:00:1f.0: LPC
Generic IO decode 1 PIO at 4700-477f [ 0.097807] pci 0000:00:1f.2:
reg 10 io port: [0x00-0x07] [ 0.097815] pci 0000:00:1f.2: reg 14 io
port: [0x00-0x03] [ 0.097822] pci 0000:00:1f.2: reg 18 io port:
[0x00-0x07] [ 0.097830] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
[ 0.097838] pci 0000:00:1f.2: reg 20 io port: [0x4880-0x488f]
[ 0.097870] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.097875] pci 0000:00:1f.2: PME# disabled
[ 0.097934] pci 0000:00:1f.3: reg 20 io port: [0x48c0-0x48df]
[ 0.097990] pci 0000:01:00.0: reg 10 32bit mmio pref:
[0xc8000000-0xcfffffff] [ 0.097996] pci 0000:01:00.0: reg 14 io
port: [0x5000-0x50ff] [ 0.098002] pci 0000:01:00.0: reg 18 32bit
mmio: [0xb8100000-0xb810ffff] [ 0.098016] pci 0000:01:00.0: reg 30
32bit mmio pref: [0x000000-0x01ffff] [ 0.098033] pci 0000:01:00.0:
supports D1 D2 [ 0.098046] pci 0000:01:00.0: disabling ASPM on
pre-1.1 PCIe device. You can enable it with
'pcie_aspm=force' [ 0.098106] pci 0000:00:01.0: bridge io port:
[0x5000-0x5fff] [ 0.098109] pci 0000:00:01.0: bridge 32bit mmio:
[0xb8100000-0xb81fffff] [ 0.098113] pci 0000:00:01.0: bridge 32bit
mmio pref: [0xc8000000-0xcfffffff] [ 0.098165] pci 0000:00:1c.0:
bridge io port: [0x6000-0x6fff] [ 0.098170] pci 0000:00:1c.0: bridge
32bit mmio: [0xbc000000-0xbfffffff] [ 0.098178] pci 0000:00:1c.0:
bridge 64bit mmio pref: [0xd0000000-0xd3ffffff] [ 0.098254] pci
0000:03:00.0: reg 10 64bit mmio: [0xc0000000-0xc0003fff] [ 0.098264]
pci 0000:03:00.0: reg 18 io port: [0x7000-0x70ff] [ 0.098298] pci
0000:03:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.098349] pci 0000:03:00.0: supports D1 D2 [ 0.098351] pci
0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.098358]
pci 0000:03:00.0: PME# disabled [ 0.098391] pci 0000:03:00.0:
disabling ASPM on pre-1.1 PCIe device. You can enable it with
'pcie_aspm=force' [ 0.098483] pci 0000:00:1c.1: bridge io port:
[0x7000-0x7fff] [ 0.098488] pci 0000:00:1c.1: bridge 32bit mmio:
[0xc0000000-0xc3ffffff] [ 0.098496] pci 0000:00:1c.1: bridge 64bit
mmio pref: [0xd4000000-0xd7ffffff] [ 0.098556] pci 0000:06:08.0: reg
10 io port: [0x8060-0x8067] [ 0.098565] pci 0000:06:08.0: reg 14 io
port: [0x8054-0x8057] [ 0.098574] pci 0000:06:08.0: reg 18 io port:
[0x8058-0x805f] [ 0.098583] pci 0000:06:08.0: reg 1c io port:
[0x8050-0x8053] [ 0.098592] pci 0000:06:08.0: reg 20 io port:
[0x8040-0x804f] [ 0.098601] pci 0000:06:08.0: reg 24 32bit mmio:
[0xc4006000-0xc40061ff] [ 0.098611] pci 0000:06:08.0: reg 30 32bit
mmio pref: [0x000000-0x07ffff] [ 0.098635] pci 0000:06:08.0:
supports D1 D2 [ 0.098687] pci 0000:06:09.0: reg 10 32bit mmio:
[0xc4007000-0xc4007fff] [ 0.098714] pci 0000:06:09.0: supports D1 D2
[ 0.098716] pci 0000:06:09.0: PME# supported from D0 D1 D2 D3hot
D3cold [ 0.098722] pci 0000:06:09.0: PME# disabled [ 0.098770]
pci 0000:06:09.2: reg 10 32bit mmio: [0xc4006800-0xc4006fff]
[ 0.098780] pci 0000:06:09.2: reg 14 32bit mmio:
[0xc4000000-0xc4003fff] [ 0.098841] pci 0000:06:09.2: supports D1 D2
[ 0.098844] pci 0000:06:09.2: PME# supported from D0 D1 D2 D3hot
[ 0.098849] pci 0000:06:09.2: PME# disabled [ 0.098896] pci
0000:06:09.3: reg 10 32bit mmio: [0xc4004000-0xc4005fff] [ 0.098961]
pci 0000:06:09.3: supports D1 D2 [ 0.098963] pci 0000:06:09.3: PME#
supported from D0 D1 D2 D3hot [ 0.098969] pci 0000:06:09.3: PME#
disabled [ 0.099028] pci 0000:06:0a.0: reg 10 32bit mmio:
[0xc4008000-0xc4008fff] [ 0.099094] pci 0000:06:0a.0: PME# supported
from D0 D3hot D3cold [ 0.099099] pci 0000:06:0a.0: PME# disabled
[ 0.099176] pci 0000:06:0b.0: reg 20 io port: [0x8000-0x801f]
[ 0.099213] pci 0000:06:0b.0: supports D1 D2 [ 0.099215] pci
0000:06:0b.0: PME# supported from D0 D1 D2 D3hot [ 0.099221] pci
0000:06:0b.0: PME# disabled [ 0.099289] pci 0000:06:0b.1: reg 20 io
port: [0x8020-0x803f] [ 0.099327] pci 0000:06:0b.1: supports D1 D2
[ 0.099329] pci 0000:06:0b.1: PME# supported from D0 D1 D2 D3hot
[ 0.099334] pci 0000:06:0b.1: PME# disabled
[ 0.099377] pci 0000:06:0b.2: reg 10 32bit mmio:
[0xc4006400-0xc40064ff] [ 0.099439] pci 0000:06:0b.2: supports D1 D2
[ 0.099442] pci 0000:06:0b.2: PME# supported from D0 D1 D2 D3hot
[ 0.099447] pci 0000:06:0b.2: PME# disabled
[ 0.099503] pci 0000:00:1e.0: transparent bridge
[ 0.099508] pci 0000:00:1e.0: bridge io port: [0x8000-0x8fff]
[ 0.099513] pci 0000:00:1e.0: bridge 32bit mmio:
[0xc4000000-0xc40fffff] [ 0.099561] pci_bus 0000:00: on NUMA node 0
[ 0.099565] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.099751] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 0.099831] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.099900] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.099990] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.105058] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12
14 15) [ 0.105152] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7
11 12 14 15) *10 [ 0.105244] ACPI: PCI Interrupt Link [LNKC] (IRQs 1
3 4 *5 6 7 10 12 14 15) [ 0.105335] ACPI: PCI Interrupt Link [LNKD]
(IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.105427] ACPI: PCI Interrupt
Link [LNKE] (IRQs 1 3 *4 5 6 7 10 12 14 15) [ 0.105518] ACPI: PCI
Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.105610] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12
14 15) [ 0.105701] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7
11 12 14 15) *0, disabled. [ 0.105800] vgaarb: device added:
PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.105805]
vgaarb: loaded [ 0.105864] PCI: Using ACPI for IRQ routing
[ 0.106151] hpet clockevent registered [ 0.106155] HPET: 3 timers
in total, 0 timers will be used for per-cpu timer [ 0.106161] hpet0:
at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.106166] hpet0: 3 comparators,
64-bit 14.318180 MHz counter [ 0.112007] Switching to clocksource tsc
[ 0.113315] pnp: PnP ACPI init
[ 0.113327] ACPI: bus type pnp registered
[ 0.114949] pnp: PnP ACPI: found 9 devices
[ 0.114952] ACPI: ACPI bus type pnp unregistered
[ 0.114955] PnPBIOS: Disabled by ACPI PNP
[ 0.114965] system 00:01: iomem range 0xe0000000-0xefffffff has been
reserved [ 0.114969] system 00:01: iomem range 0xf0000000-0xf0003fff
has been reserved [ 0.114972] system 00:01: iomem range
0xf0004000-0xf0004fff has been reserved [ 0.114976] system 00:01:
iomem range 0xf0005000-0xf0005fff has been reserved [ 0.114979]
system 00:01: iomem range 0xf0008000-0xf000bfff has been reserved
[ 0.114982] system 00:01: iomem range 0xfed20000-0xfed8ffff has been
reserved [ 0.114989] system 00:04: ioport range 0x200-0x20f has been
reserved [ 0.114992] system 00:04: ioport range 0x680-0x6ff has been
reserved [ 0.114996] system 00:04: ioport range 0x800-0x80f has been
reserved [ 0.114999] system 00:04: ioport range 0x1000-0x107f has
been reserved [ 0.115002] system 00:04: ioport range 0x1180-0x11bf
has been reserved [ 0.115006] system 00:04: ioport range
0x1600-0x167f has been reserved [ 0.115009] system 00:04: ioport
range 0xfe00-0xfe01 has been reserved [ 0.149695] pci 0000:00:01.0:
PCI bridge, secondary bus 0000:01 [ 0.149698] pci 0000:00:01.0: IO
window: 0x5000-0x5fff [ 0.149703] pci 0000:00:01.0: MEM window:
0xb8100000-0xb81fffff [ 0.149706] pci 0000:00:01.0: PREFETCH
window: 0xc8000000-0xcfffffff [ 0.149711] pci 0000:00:1c.0: PCI
bridge, secondary bus 0000:02 [ 0.149715] pci 0000:00:1c.0: IO
window: 0x6000-0x6fff [ 0.149721] pci 0000:00:1c.0: MEM window:
0xbc000000-0xbfffffff [ 0.149727] pci 0000:00:1c.0: PREFETCH
window: 0x000000d0000000-0x000000d3ffffff [ 0.149735] pci
0000:00:1c.1: PCI bridge, secondary bus 0000:03 [ 0.149739] pci
0000:00:1c.1: IO window: 0x7000-0x7fff [ 0.149745] pci
0000:00:1c.1: MEM window: 0xc0000000-0xc3ffffff [ 0.149751] pci
0000:00:1c.1: PREFETCH window: 0x000000d4000000-0x000000d7ffffff
[ 0.149762] pci 0000:06:09.0: CardBus bridge, secondary bus 0000:07
[ 0.149765] pci 0000:06:09.0: IO window: 0x008400-0x0084ff
[ 0.149771] pci 0000:06:09.0: IO window: 0x008800-0x0088ff
[ 0.149777] pci 0000:06:09.0: PREFETCH window:
0x80000000-0x83ffffff [ 0.149783] pci 0000:06:09.0: MEM window:
0x88000000-0x8bffffff [ 0.149789] pci 0000:00:1e.0: PCI bridge,
secondary bus 0000:06 [ 0.149793] pci 0000:00:1e.0: IO window:
0x8000-0x8fff [ 0.149799] pci 0000:00:1e.0: MEM window:
0xc4000000-0xc40fffff [ 0.149804] pci 0000:00:1e.0: PREFETCH
window: 0x80000000-0x85ffffff [ 0.149821] pci 0000:00:01.0: PCI INT
A -> GSI 16 (level, low) -> IRQ 16 [ 0.149826] pci 0000:00:01.0:
setting latency timer to 64 [ 0.149836] pci 0000:00:1c.0: PCI INT A
-> GSI 17 (level, low) -> IRQ 17 [ 0.149841] pci 0000:00:1c.0:
setting latency timer to 64 [ 0.149850] pci 0000:00:1c.1: PCI INT B
-> GSI 16 (level, low) -> IRQ 16 [ 0.149855] pci 0000:00:1c.1:
setting latency timer to 64 [ 0.149863] pci 0000:00:1e.0: setting
latency timer to 64 [ 0.149898] pci 0000:06:09.0: power state
changed by ACPI to D0 [ 0.149906] pci 0000:06:09.0: PCI INT A -> GSI
20 (level, low) -> IRQ 20 [ 0.149913] pci_bus 0000:00: resource 0
io: [0x00-0xffff] [ 0.149916] pci_bus 0000:00: resource 1 mem:
[0x000000-0xffffffff] [ 0.149920] pci_bus 0000:01: resource 0 io:
[0x5000-0x5fff] [ 0.149922] pci_bus 0000:01: resource 1 mem:
[0xb8100000-0xb81fffff] [ 0.149925] pci_bus 0000:01: resource 2 pref
mem [0xc8000000-0xcfffffff] [ 0.149928] pci_bus 0000:02: resource 0
io: [0x6000-0x6fff] [ 0.149931] pci_bus 0000:02: resource 1 mem:
[0xbc000000-0xbfffffff] [ 0.149934] pci_bus 0000:02: resource 2 pref
mem [0xd0000000-0xd3ffffff] [ 0.149937] pci_bus 0000:03: resource 0
io: [0x7000-0x7fff] [ 0.149940] pci_bus 0000:03: resource 1 mem:
[0xc0000000-0xc3ffffff] [ 0.149943] pci_bus 0000:03: resource 2 pref
mem [0xd4000000-0xd7ffffff] [ 0.149946] pci_bus 0000:06: resource 0
io: [0x8000-0x8fff] [ 0.149949] pci_bus 0000:06: resource 1 mem:
[0xc4000000-0xc40fffff] [ 0.149952] pci_bus 0000:06: resource 2 pref
mem [0x80000000-0x85ffffff] [ 0.149955] pci_bus 0000:06: resource 3
io: [0x00-0xffff] [ 0.149957] pci_bus 0000:06: resource 4 mem:
[0x000000-0xffffffff] [ 0.149960] pci_bus 0000:07: resource 0 io:
[0x8400-0x84ff] [ 0.149963] pci_bus 0000:07: resource 1 io:
[0x8800-0x88ff] [ 0.149966] pci_bus 0000:07: resource 2 pref mem
[0x80000000-0x83ffffff] [ 0.149969] pci_bus 0000:07: resource 3 mem:
[0x88000000-0x8bffffff] [ 0.150000] NET: Registered protocol family
2 [ 0.150083] IP route cache hash table entries: 32768 (order: 5,
131072 bytes) [ 0.150386] TCP established hash table entries: 131072
(order: 8, 1048576 bytes) [ 0.151348] TCP bind hash table entries:
65536 (order: 7, 524288 bytes) [ 0.151944] TCP: Hash tables
configured (established 131072 bind 65536) [ 0.151948] TCP reno
registered [ 0.152109] NET: Registered protocol family 1
[ 0.152235] pci 0000:01:00.0: Boot video device [ 0.152339]
Unpacking initramfs... [ 0.415745] Freeing initrd memory: 8775k
freed [ 0.422782] Simple Boot Flag at 0x36 set to 0x1 [ 0.423042]
audit: initializing netlink socket (disabled) [ 0.423059] type=2000
audit(1269508705.419:1): initialized [ 0.423316] highmem bounce pool
size: 64 pages [ 0.423321] HugeTLB registered 4 MB page size,
pre-allocated 0 pages [ 0.424763] VFS: Disk quotas dquot_6.5.2
[ 0.424821] Dquot-cache hash table entries: 1024 (order 0, 4096
bytes) [ 0.424902] msgmni has been set to 1723
[ 0.425102] alg: No test for stdrng (krng)
[ 0.425153] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253) [ 0.425156] io scheduler noop registered
[ 0.425158] io scheduler anticipatory registered
[ 0.425160] io scheduler deadline registered
[ 0.425194] io scheduler cfq registered (default)
[ 0.425322] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.425329] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.425445] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.425456] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.425597] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
[ 0.425607] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.425780] isapnp: Scanning for PnP cards...
[ 0.779480] isapnp: No Plug & Play device found
[ 0.780741] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.781093] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at
0x60,0x64 irq 1,12 [ 0.784457] serio: i8042 KBD port at 0x60,0x64
irq 1 [ 0.784464] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.784554] mice: PS/2 mouse device common for all mice
[ 0.784612] rtc_cmos 00:05: RTC can wake from S4
[ 0.784645] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.784675] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet
irqs [ 0.784686] cpuidle: using governor ladder
[ 0.784688] cpuidle: using governor menu
[ 0.784692] No iBFT detected.
[ 0.785014] TCP cubic registered
[ 0.785156] NET: Registered protocol family 10
[ 0.785570] lo: Disabled Privacy Extensions
[ 0.785847] Mobile IPv6
[ 0.785849] NET: Registered protocol family 17
[ 0.785866] Using IPI No-Shortcut mode
[ 0.785927] PM: Resume from disk failed.
[ 0.785934] registered taskstats version 1
[ 0.786397] rtc_cmos 00:05: setting system clock to 2010-03-25
09:18:26 UTC (1269508706) [ 0.786456] Freeing unused kernel memory:
368k freed [ 0.786675] Write protecting the kernel text: 2432k
[ 0.786694] Write protecting the kernel read-only data: 888k
[ 0.817629] input: AT Translated Set 2 keyboard
as /devices/platform/i8042/serio0/input/input0 [ 0.927966] thermal
LNXTHERM:01: registered as thermal_zone0 [ 0.927975] ACPI: Thermal
Zone [TZ01] (58 C) [ 1.124719] input: Lid Switch
as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 1.124810] ACPI: Lid Switch [LID] [ 1.124896] input: Power
Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 1.124901] ACPI: Power Button [PWRB] [ 1.124976] input: Power
Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.124981]
ACPI: Power Button [PWRF] [ 1.125224] usbcore: registered new
interface driver usbfs [ 1.125312] usbcore: registered new interface
driver hub [ 1.125400] usbcore: registered new device driver usb
[ 1.133662] sky2 driver version 1.25
[ 1.133700] sky2 0000:03:00.0: PCI INT A -> GSI 17 (level, low) ->
IRQ 17 [ 1.133715] sky2 0000:03:00.0: setting latency timer to 64
[ 1.133742] sky2 0000:03:00.0: Yukon-2 EC chip revision 2
[ 1.133862] sky2 0000:03:00.0: irq 27 for MSI/MSI-X
[ 1.134483] sky2 eth0: addr 00:01:4a:9c:f3:f4
[ 1.135180] SCSI subsystem initialized
[ 1.157572] Linux agpgart interface v0.103
[ 1.167761] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
Driver [ 1.167801] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 18
(level, low) -> IRQ 18 [ 1.167819] ehci_hcd 0000:00:1d.7: setting
latency timer to 64 [ 1.167823] ehci_hcd 0000:00:1d.7: EHCI Host
Controller [ 1.167843] ehci_hcd 0000:00:1d.7: new USB bus
registered, assigned bus number 1 [ 1.167872] ehci_hcd 0000:00:1d.7:
debug port 1 [ 1.171753] ehci_hcd 0000:00:1d.7: cache line size of
32 is not supported [ 1.171771] ehci_hcd 0000:00:1d.7: irq 18, io
mem 0xb8004000 [ 1.179504] input: Video Bus
as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input4
[ 1.179512] ACPI: Video Device [VGA] (multi-head: yes rom: no
post: no) [ 1.186737] firewire_ohci 0000:06:09.2: PCI INT C -> GSI
22 (level, low) -> IRQ 22 [ 1.192279] libata version 3.00 loaded.
[ 1.204010] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.204054] usb usb1: New USB device found, idVendor=1d6b,
idProduct=0002 [ 1.204057] usb usb1: New USB device strings: Mfr=3,
Product=2, SerialNumber=1 [ 1.204060] usb usb1: Product: EHCI Host
Controller [ 1.204063] usb usb1: Manufacturer: Linux 2.6.32-3-686
ehci_hcd [ 1.204065] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.204191] usb usb1: configuration #1 chosen from 1 choice
[ 1.204251] hub 1-0:1.0: USB hub found [ 1.204260] hub 1-0:1.0: 8
ports detected [ 1.256008] firewire_ohci: Added fw-ohci device
0000:06:09.2, OHCI version 1.10 [ 1.256109] sata_sil 0000:06:08.0:
version 2.4 [ 1.256144] sata_sil 0000:06:08.0: PCI INT A -> GSI 17
(level, low) -> IRQ 17 [ 1.256165] sata_sil 0000:06:08.0: Applying
R_ERR on DMA activate FIS errata fix [ 1.256342] scsi0 : sata_sil
[ 1.256464] scsi1 : sata_sil
[ 1.256504] ata1: SATA max UDMA/100 mmio m512@0xc4006000 tf
0xc4006080 irq 17 [ 1.256508] ata2: SATA max UDMA/100 mmio
m512@0xc4006000 tf 0xc40060c0 irq 17 [ 1.256598] ehci_hcd
0000:06:0b.2: PCI INT C -> GSI 16 (level, low) -> IRQ 16 [ 1.256611]
ehci_hcd 0000:06:0b.2: EHCI Host Controller [ 1.256621] ehci_hcd
0000:06:0b.2: new USB bus registered, assigned bus number 2
[ 1.256667] ehci_hcd 0000:06:0b.2: irq 16, io mem 0xc4006400
[ 1.268008] ehci_hcd 0000:06:0b.2: USB 2.0 started, EHCI 1.00
[ 1.268034] usb usb2: New USB device found, idVendor=1d6b,
idProduct=0002 [ 1.268036] usb usb2: New USB device strings: Mfr=3,
Product=2, SerialNumber=1 [ 1.268039] usb usb2: Product: EHCI Host
Controller [ 1.268042] usb usb2: Manufacturer: Linux 2.6.32-3-686
ehci_hcd [ 1.268044] usb usb2: SerialNumber: 0000:06:0b.2
[ 1.268106] usb usb2: configuration #1 chosen from 1 choice
[ 1.268134] hub 2-0:1.0: USB hub found [ 1.268141] hub 2-0:1.0: 4
ports detected [ 1.278530] uhci_hcd: USB Universal Host Controller
Interface driver [ 1.278564] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI
18 (level, low) -> IRQ 18 [ 1.278572] uhci_hcd 0000:00:1d.0: setting
latency timer to 64 [ 1.278576] uhci_hcd 0000:00:1d.0: UHCI Host
Controller [ 1.278587] uhci_hcd 0000:00:1d.0: new USB bus
registered, assigned bus number 3 [ 1.278615] uhci_hcd 0000:00:1d.0:
irq 18, io base 0x00004800 [ 1.278650] usb usb3: New USB device
found, idVendor=1d6b, idProduct=0001 [ 1.278653] usb usb3: New USB
device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.278656] usb
usb3: Product: UHCI Host Controller [ 1.278658] usb usb3:
Manufacturer: Linux 2.6.32-3-686 uhci_hcd [ 1.278661] usb usb3:
SerialNumber: 0000:00:1d.0 [ 1.278756] usb usb3: configuration #1
chosen from 1 choice [ 1.278813] hub 3-0:1.0: USB hub found
[ 1.278821] hub 3-0:1.0: 2 ports detected
[ 1.278873] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low)
-> IRQ 22 [ 1.278879] uhci_hcd 0000:00:1d.1: setting latency timer
to 64 [ 1.278883] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.278889] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 4 [ 1.278915] uhci_hcd 0000:00:1d.1: irq 22, io base
0x00004820 [ 1.278946] usb usb4: New USB device found,
idVendor=1d6b, idProduct=0001 [ 1.278949] usb usb4: New USB device
strings: Mfr=3, Product=2, SerialNumber=1 [ 1.278951] usb usb4:
Product: UHCI Host Controller [ 1.278954] usb usb4: Manufacturer:
Linux 2.6.32-3-686 uhci_hcd [ 1.278956] usb usb4: SerialNumber:
0000:00:1d.1 [ 1.279038] usb usb4: configuration #1 chosen from 1
choice [ 1.279092] hub 4-0:1.0: USB hub found
[ 1.279101] hub 4-0:1.0: 2 ports detected
[ 1.279149] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low)
-> IRQ 18 [ 1.279155] uhci_hcd 0000:00:1d.2: setting latency timer
to 64 [ 1.279159] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.279165] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 5 [ 1.279191] uhci_hcd 0000:00:1d.2: irq 18, io base
0x00004840 [ 1.279222] usb usb5: New USB device found,
idVendor=1d6b, idProduct=0001 [ 1.279225] usb usb5: New USB device
strings: Mfr=3, Product=2, SerialNumber=1 [ 1.279228] usb usb5:
Product: UHCI Host Controller [ 1.279230] usb usb5: Manufacturer:
Linux 2.6.32-3-686 uhci_hcd [ 1.279232] usb usb5: SerialNumber:
0000:00:1d.2 [ 1.279315] usb usb5: configuration #1 chosen from 1
choice [ 1.279369] hub 5-0:1.0: USB hub found
[ 1.279376] hub 5-0:1.0: 2 ports detected
[ 1.279420] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low)
-> IRQ 16 [ 1.279426] uhci_hcd 0000:00:1d.3: setting latency timer
to 64 [ 1.279430] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.279436] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned
bus number 6 [ 1.279461] uhci_hcd 0000:00:1d.3: irq 16, io base
0x00004860 [ 1.279492] usb usb6: New USB device found,
idVendor=1d6b, idProduct=0001 [ 1.279495] usb usb6: New USB device
strings: Mfr=3, Product=2, SerialNumber=1 [ 1.279498] usb usb6:
Product: UHCI Host Controller [ 1.279500] usb usb6: Manufacturer:
Linux 2.6.32-3-686 uhci_hcd [ 1.279502] usb usb6: SerialNumber:
0000:00:1d.3 [ 1.279585] usb usb6: configuration #1 chosen from 1
choice [ 1.279639] hub 6-0:1.0: USB hub found
[ 1.279646] hub 6-0:1.0: 2 ports detected
[ 1.279700] uhci_hcd 0000:06:0b.0: PCI INT A -> GSI 22 (level, low)
-> IRQ 22 [ 1.279709] uhci_hcd 0000:06:0b.0: UHCI Host Controller
[ 1.279716] uhci_hcd 0000:06:0b.0: new USB bus registered, assigned
bus number 7 [ 1.279742] uhci_hcd 0000:06:0b.0: irq 22, io base
0x00008000 [ 1.279777] usb usb7: New USB device found,
idVendor=1d6b, idProduct=0001 [ 1.279780] usb usb7: New USB device
strings: Mfr=3, Product=2, SerialNumber=1 [ 1.279783] usb usb7:
Product: UHCI Host Controller [ 1.279785] usb usb7: Manufacturer:
Linux 2.6.32-3-686 uhci_hcd [ 1.279788] usb usb7: SerialNumber:
0000:06:0b.0 [ 1.279876] usb usb7: configuration #1 chosen from 1
choice [ 1.283661] ata_piix 0000:00:1f.2: version 2.13
[ 1.283681] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low)
-> IRQ 19 [ 1.283686] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 1.283723] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.283838] hub 7-0:1.0: USB hub found
[ 1.283847] hub 7-0:1.0: 2 ports detected
[ 1.283899] uhci_hcd 0000:06:0b.1: PCI INT B -> GSI 19 (level, low)
-> IRQ 19 [ 1.283907] uhci_hcd 0000:06:0b.1: UHCI Host Controller
[ 1.283915] uhci_hcd 0000:06:0b.1: new USB bus registered, assigned
bus number 8 [ 1.283950] uhci_hcd 0000:06:0b.1: irq 19, io base
0x00008020 [ 1.283984] usb usb8: New USB device found,
idVendor=1d6b, idProduct=0001 [ 1.283986] usb usb8: New USB device
strings: Mfr=3, Product=2, SerialNumber=1 [ 1.283989] usb usb8:
Product: UHCI Host Controller [ 1.283991] usb usb8: Manufacturer:
Linux 2.6.32-3-686 uhci_hcd [ 1.283994] usb usb8: SerialNumber:
0000:06:0b.1 [ 1.284095] usb usb8: configuration #1 chosen from 1
choice [ 1.284154] hub 8-0:1.0: USB hub found
[ 1.284161] hub 8-0:1.0: 2 ports detected
[ 1.284284] scsi2 : ata_piix
[ 1.285433] scsi3 : ata_piix
[ 1.285639] ata3: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x4880
irq 14 [ 1.285643] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma
0x4888 irq 15 [ 1.472538] ata3.00: ATA-7: HTS541080G9SA00, MB4OC60D,
max UDMA/100 [ 1.472542] ata3.00: 156301488 sectors, multi 16: LBA48
NCQ (not used) [ 1.472837] ata3.01: ATA-7: HTS541080G9SA00,
MB4OC60D, max UDMA/100 [ 1.472840] ata3.01: 156301488 sectors, multi
16: LBA48 NCQ (not used) [ 1.488556] ata3.00: configured for UDMA/100
[ 1.504550] ata3.01: configured for UDMA/100
[ 1.576025] ata1: SATA link down (SStatus 0 SControl 310)
[ 1.632010] usb 1-4: new high speed USB device using ehci_hcd and
address 3 [ 1.756083] firewire_core: created device fw0: GUID
0800460301eb7691, S400 [ 1.766610] usb 1-4: New USB device found,
idVendor=04b4, idProduct=6830 [ 1.766614] usb 1-4: New USB device
strings: Mfr=56, Product=85, SerialNumber=107 [ 1.766617] usb 1-4:
Product: USB2.0 Storage Device [ 1.766619] usb 1-4: Manufacturer:
DVD TEST USB2.0 BRIDGE BOARD [ 1.766621] usb 1-4: SerialNumber:
DEF101E2ABA5 [ 1.766853] usb 1-4: configuration #1 chosen from 1
choice [ 1.774928] Initializing USB Mass Storage driver...
[ 1.774988] usbcore: registered new interface driver usb-storage
[ 1.775057] USB Mass Storage support registered.
[ 1.896026] ata2: SATA link down (SStatus 0 SControl 310)
[ 1.896167] scsi 2:0:0:0: Direct-Access ATA
HTS541080G9SA00 MB4O PQ: 0 ANSI: 5 [ 1.896413] scsi 2:0:1:0:
Direct-Access ATA HTS541080G9SA00 MB4O PQ: 0 ANSI: 5
[ 1.921212] Uniform Multi-Platform E-IDE driver [ 1.931934] sd
2:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 1.931980] sd 2:0:0:0: [sda] Write Protect is off [ 1.931983] sd
2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.932025] sd 2:0:0:0: [sda]
Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.932377] sda: [ 1.957555] sd 2:0:1:0: [sdb] 156301488
512-byte logical blocks: (80.0 GB/74.5 GiB) [ 1.957597] sd 2:0:1:0:
[sdb] Write Protect is off [ 1.957600] sd 2:0:1:0: [sdb] Mode Sense:
00 3a 00 00 [ 1.957622] sd 2:0:1:0: [sdb] Write cache: enabled, read
cache: enabled, doesn't support DPO or FUA [ 1.957734] sdb: sda1
[ 1.985128] sdb1 sdb2 sdb3 sdb4
[ 1.988013] usb 2-2: new high speed USB device using ehci_hcd and
address 2 [ 1.993600] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.993678] sd 2:0:1:0: [sdb] Attached SCSI disk
[ 2.144060] usb 2-2: New USB device found, idVendor=0ac8,
idProduct=c001 [ 2.144064] usb 2-2: New USB device strings: Mfr=1,
Product=2, SerialNumber=0 [ 2.144067] usb 2-2: Product: USB2.0 Web
Camera [ 2.144070] usb 2-2: Manufacturer: Vimicro Corp.
[ 2.144161] usb 2-2: configuration #1 chosen from 1 choice
[ 2.384082] usb 3-2: new full speed USB device using uhci_hcd and
address 2 [ 2.429411] PM: Starting manual resume from disk
[ 2.429415] PM: Resume from partition 8:18
[ 2.429416] PM: Checking hibernation image.
[ 2.429635] PM: Error -22 checking image file
[ 2.429637] PM: Resume from disk failed.
[ 2.433435] PM: Marking nosave pages: 000000000009f000 -
0000000000100000 [ 2.433439] PM: Basic memory bitmaps created
[ 2.444876] PM: Basic memory bitmaps freed
[ 2.515200] kjournald starting. Commit interval 5 seconds
[ 2.515208] EXT3-fs: mounted filesystem with ordered data mode.
[ 2.552170] usb 3-2: New USB device found, idVendor=046d,
idProduct=c223 [ 2.552174] usb 3-2: New USB device strings: Mfr=0,
Product=2, SerialNumber=0 [ 2.552177] usb 3-2: Product: G15 Keyboard
Hub [ 2.552285] usb 3-2: configuration #1 chosen from 1 choice
[ 2.554514] hub 3-2:1.0: USB hub found
[ 2.556473] hub 3-2:1.0: 4 ports detected
[ 2.800010] usb 5-1: new full speed USB device using uhci_hcd and
address 2 [ 2.978998] usb 5-1: New USB device found, idVendor=0483,
idProduct=2016 [ 2.979001] usb 5-1: New USB device strings: Mfr=1,
Product=2, SerialNumber=0 [ 2.979004] usb 5-1: Product: Biometric
Coprocessor [ 2.979007] usb 5-1: Manufacturer: STMicroelectronics
[ 2.979106] usb 5-1: configuration #1 chosen from 1 choice
[ 3.057403] usb 3-2.1: new low speed USB device using uhci_hcd and
address 3 [ 3.192382] usb 3-2.1: New USB device found,
idVendor=046d, idProduct=c226 [ 3.192386] usb 3-2.1: New USB device
strings: Mfr=0, Product=2, SerialNumber=0 [ 3.192389] usb 3-2.1:
Product: G15 Gaming Keyboard [ 3.192452] usb 3-2.1: configuration #1
chosen from 1 choice [ 3.397354] usb 3-2.2: new full speed USB
device using uhci_hcd and address 4 [ 3.527336] usb 3-2.2: New USB
device found, idVendor=056a, idProduct=0065 [ 3.527340] usb 3-2.2:
New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.527343]
usb 3-2.2: Product: MTE-450 [ 3.527345] usb 3-2.2: Manufacturer:
Wacom Co.,Ltd. [ 3.527417] usb 3-2.2: configuration #1 chosen from 1
choice [ 3.605327] usb 3-2.3: new low speed USB device using
uhci_hcd and address 5 [ 3.744305] usb 3-2.3: New USB device found,
idVendor=046d, idProduct=c03e [ 3.744308] usb 3-2.3: New USB device
strings: Mfr=1, Product=2, SerialNumber=0 [ 3.744312] usb 3-2.3:
Product: USB-PS/2 Optical Mouse [ 3.744314] usb 3-2.3: Manufacturer:
Logitech [ 3.744390] usb 3-2.3: configuration #1 chosen from 1 choice
[ 3.821297] usb 3-2.4: new full speed USB device using uhci_hcd and
address 6 [ 3.958276] usb 3-2.4: New USB device found,
idVendor=046d, idProduct=c227 [ 3.958280] usb 3-2.4: New USB device
strings: Mfr=0, Product=2, SerialNumber=0 [ 3.958283] usb 3-2.4:
Product: G15 GamePanel LCD [ 3.958385] usb 3-2.4: configuration #1
chosen from 1 choice [ 4.583840] udev: starting version 151
[ 5.209981] ACPI: AC Adapter [ACAD] (on-line)
[ 5.210585] input: PC Speaker
as /devices/platform/pcspkr/input/input5 [ 5.214546] Marking TSC
unstable due to TSC halts in idle [ 5.215205] processor LNXCPU:00:
registered as cooling_device0 [ 5.218824] ACPI: Battery Slot [BAT1]
(battery absent) [ 5.219988] Switching to clocksource hpet
[ 5.368876] sony-laptop: Sony Notebook Control Driver v0.6.
[ 5.369016] input: Sony Vaio Keys
as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1e/SNY5001:00/input/input6
[ 5.369320] input: Sony Vaio Jogdial
as /devices/virtual/input/input7 [ 5.668722] tifm_7xx1 0000:06:09.3:
PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 5.705283] input: Wacom
Bamboo
as /devices/pci0000:00/0000:00:1d.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input8
[ 5.711867] tpm_inf_pnp 00:08: Found TPM0 with ID IFX0101
[ 5.711914] tpm_inf_pnp 00:08: TPM found: config base 0x4e, data
base 0x4700, chip version 0x0006, vendor id 0x15d1 (Infineon), product
id 0x0006 (SLD 9630 TT 1.1) [ 5.719119] usbcore: registered new
interface driver wacom [ 5.719240] wacom: v1.51:USB Wacom Graphire
and Wacom Intuos tablet driver [ 5.951328] lib80211: common routines
for IEEE802.11 drivers [ 5.951332] lib80211_crypt: registered
algorithm 'NULL' [ 5.978528] intel_rng: FWH not detected
[ 5.978572] scsi4 : SCSI emulation for USB Mass Storage devices
[ 5.979567] usbcore: registered new interface driver ums-cypress
[ 5.979719] usb-storage: device found at 3 [ 5.979721]
usb-storage: waiting for device to settle before scanning
[ 5.993137] usbcore: registered new interface driver hiddev
[ 6.007757] input: G15 Gaming Keyboard
as /devices/pci0000:00/0000:00:1d.0/usb3/3-2/3-2.1/3-2.1:1.0/input/input9
[ 6.008547] generic-usb 0003:046D:C226.0001: input,hidraw0: USB HID
v1.10 Keyboard [G15 Gaming Keyboard] on usb-0000:00:1d.0-2.1/input0
[ 6.043179] input: G15 Gaming Keyboard
as /devices/pci0000:00/0000:00:1d.0/usb3/3-2/3-2.1/3-2.1:1.1/input/input10
[ 6.043306] generic-usb 0003:046D:C226.0002: input,hiddev0,hidraw1:
USB HID v1.10 Device [G15 Gaming Keyboard] on
usb-0000:00:1d.0-2.1/input1 [ 6.056498] input: Logitech USB-PS/2
Optical Mouse
as /devices/pci0000:00/0000:00:1d.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input11
[ 6.056593] generic-usb 0003:046D:C03E.0003: input,hidraw2: USB HID
v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on
usb-0000:00:1d.0-2.3/input0 [ 6.063203] input: G15 GamePanel LCD
as /devices/pci0000:00/0000:00:1d.0/usb3/3-2/3-2.4/3-2.4:1.0/input/input12
[ 6.063302] generic-usb 0003:046D:C227.0004: input,hiddev1,hidraw3:
USB HID v1.11 Keypad [G15 GamePanel LCD] on usb-0000:00:1d.0-2.4/input0
[ 6.063323] usbcore: registered new interface driver usbhid
[ 6.063326] usbhid: v2.6:USB HID core driver [ 6.316220]
yenta_cardbus 0000:06:09.0: CardBus bridge found [104d:81e8]
[ 6.316243] yenta_cardbus 0000:06:09.0: Enabling burst memory read
transactions [ 6.316249] yenta_cardbus 0000:06:09.0: Using CSCINT to
route CSC interrupts to PCI [ 6.316252] yenta_cardbus 0000:06:09.0:
Routing CardBus interrupts to PCI [ 6.316258] yenta_cardbus
0000:06:09.0: TI: mfunc 0x00a01b22, devctl 0x64 [ 6.540238] input:
DualPoint Stick as /devices/platform/i8042/serio1/input/input13
[ 6.548985] yenta_cardbus 0000:06:09.0: ISA IRQ mask 0x0cf8, PCI irq
20 [ 6.548990] yenta_cardbus 0000:06:09.0: Socket status: 30000006
[ 6.548994] pci_bus 0000:06: Raising subordinate bus# of parent bus
(#06) from #07 to #0a [ 6.549003] yenta_cardbus 0000:06:09.0:
pcmcia: parent PCI bridge I/O window: 0x8000 - 0x8fff [ 6.549007]
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x8000-0x8fff: clean.
[ 6.549256] yenta_cardbus 0000:06:09.0: pcmcia: parent PCI bridge
Memory window: 0xc4000000 - 0xc40fffff [ 6.549260] yenta_cardbus
0000:06:09.0: pcmcia: parent PCI bridge Memory window: 0x80000000 -
0x85ffffff [ 6.561628] input: AlpsPS/2 ALPS DualPoint TouchPad
as /devices/platform/i8042/serio1/input/input14 [ 6.636212]
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 6.636219] ACPI: I/O resource 0000:00:1f.3 [0x48c0-0x48df]
conflicts with ACPI region SMBI [0x48c0-0x48cf] [ 6.636267] ACPI: If
an ACPI driver is available for this device, you should use it instead
of the native driver [ 6.637821] ieee80211: 802.11
data/management/control stack, git-1.1.13 [ 6.637824] ieee80211:
Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 6.667682] Linux video capture interface: v2.00 [ 6.816184]
gspca: main v2.7.0 registered [ 6.816235] ipw2200: Intel(R)
PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq [ 6.816237]
ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 6.816310]
ipw2200 0000:06:0a.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 6.816371] ipw2200: Detected Intel PRO/Wireless 2200BG Network
Connection [ 6.816418] ipw2200 0000:06:0a.0: firmware: requesting
ipw2200-bss.fw [ 6.909826] gspca: probing 0ac8:c001 [ 6.910245]
vc032x: check sensor header 2c [ 7.008160] pcmcia_socket
pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 7.009882]
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding
0x4d0-0x4d7 [ 7.010630] pcmcia_socket pcmcia_socket0: cs: IO port
probe 0x820-0x8ff: clean. [ 7.011246] pcmcia_socket pcmcia_socket0:
cs: IO port probe 0xc00-0xcf7: clean. [ 7.012024] pcmcia_socket
pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 7.085889]
vc032x: Sensor ID 7660 (7) [ 7.085892] vc032x: Find Sensor OV7660
[ 7.087328] gspca: probe ok [ 7.087352] usbcore: registered new
interface driver vc032x [ 7.087355] vc032x: registered
[ 7.259716] ipw2200: Radio Frequency Kill Switch is On:
[ 7.259719] Kill switch must be turned off for wireless networking
to work. [ 7.260873] ipw2200: Detected geography ZZD (13 802.11bg
channels, 0 802.11a channels) [ 7.319603] udev: renamed network
interface eth1 to eth2 [ 7.568791] HDA Intel 0000:00:1b.0: PCI INT A
-> GSI 20 (level, low) -> IRQ 20 [ 7.568830] HDA Intel 0000:00:1b.0:
setting latency timer to 64 [ 7.877680] input: HDA Digital PCBeep
as /devices/pci0000:00/0000:00:1b.0/input/input15 [ 8.810719] Adding
979956k swap on /dev/sdb2. Priority:-1 extents:1 across:979956k
[ 8.967851] EXT3 FS on sdb3, internal journal [ 10.913129]
kjournald starting. Commit interval 5 seconds [ 10.913424] EXT3 FS
on sdb4, internal journal [ 10.913428] EXT3-fs: mounted filesystem
with ordered data mode. [ 10.985640] usb-storage: device scan
complete [ 10.986670] scsi 4:0:0:0: CD-ROM SONY DVD RW
DW-Q58A UFS1 PQ: 0 ANSI: 0 [ 11.071365] EXT4-fs (sda1): mounted
filesystem with ordered data mode [ 11.084637] sr0: scsi3-mmc drive:
24x/24x writer cd/rw xa/form2 cdda tray [ 11.084646] Uniform CD-ROM
driver Revision: 3.20 [ 11.084907] sr 4:0:0:0: Attached scsi CD-ROM
sr0 [ 11.124095] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 11.124447] sd 2:0:1:0: Attached scsi generic sg1 type 0
[ 11.124904] sr 4:0:0:0: Attached scsi generic sg2 type 5
[ 11.720521] loop: module loaded [ 13.047286] sky2 eth0: enabling
interface [ 13.047487] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.169954] fuse init (API version 7.13) [ 13.602640] input: ACPI
Virtual Keyboard Device as /devices/virtual/input/input16
[ 14.712866] sky2 eth0: Link is up at 100 Mbps, full duplex, flow
control both [ 14.713081] ADDRCONF(NETDEV_CHANGE): eth0: link becomes
ready [ 19.408458] apm: BIOS not found. [ 22.065141] input: G15
Extra Keys as /devices/virtual/input/input17 [ 24.283010] Bluetooth:
Core ver 2.15 [ 24.283060] NET: Registered protocol family 31
[ 24.283062] Bluetooth: HCI device and connection manager initialized
[ 24.283065] Bluetooth: HCI socket layer initialized [ 24.345077]
Bluetooth: L2CAP ver 2.14 [ 24.345083] Bluetooth: L2CAP socket layer
initialized [ 24.586934] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 24.586941] Bluetooth: BNEP filters: protocol multicast
[ 24.648287] Bridge firewalling registered [ 24.744024] eth0: no
IPv6 routers present [ 24.939605] Bluetooth: SCO (Voice Link) ver 0.6
[ 24.939611] Bluetooth: SCO socket layer initialized [ 26.655944]
lp: driver loaded but no devices found [ 26.665742] ppdev: user-space
parallel port driver [ 29.854206] pci 0000:01:00.0: power state
changed by ACPI to D0 [ 29.854225] pci 0000:01:00.0: PCI INT A -> GSI
16 (level, low) -> IRQ 16 [ 30.000742] [drm] Initialized drm 1.1.0
20060810 [ 30.149890] [drm] radeon kernel modesetting enabled.
[ 30.149934] radeon 0000:01:00.0: setting latency timer to 64
[ 30.155235] [drm] radeon: Initializing kernel modesetting.
[ 30.155265] [drm] register mmio base: 0xB8100000 [ 30.155267]
[drm] register mmio size: 65536 [ 30.155394] ATOM BIOS: Quanta/Sony
[ 30.155600] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
[ 30.155624] [drm] Generation 2 PCI interface, using max accessible
memory [ 30.155628] [drm] radeon: VRAM 128M [ 30.155630] [drm]
radeon: VRAM from 0x00000000 to 0x07FFFFFF [ 30.155632] [drm] radeon:
GTT 512M [ 30.155634] [drm] radeon: GTT from 0x20000000 to 0x3FFFFFFF
[ 30.155674] radeon 0000:01:00.0: irq 28 for MSI/MSI-X [ 30.155706]
[drm] radeon: irq initialized. [ 30.156876] [drm] Detected VRAM
RAM=128M, BAR=128M [ 30.156880] [drm] RAM width 128bits DDR
[ 30.156951] [TTM] Zone kernel: Available graphics memory: 441480
kiB. [ 30.156953] [TTM] Zone highmem: Available graphics memory:
1036684 kiB. [ 30.156971] [drm] radeon: 128M of VRAM memory ready
[ 30.156973] [drm] radeon: 512M of GTT memory ready. [ 30.156991]
[drm] GART: num cpu pages 131072, num gpu pages 131072 [ 30.157371]
[drm] PCIE GART of 512M enabled (table at 0x00040000). [ 30.157379]
[drm] radeon: 2 quad pipes, 1 z pipes initialized. [ 30.157387] [drm]
radeon: cp idle (0x10000C03) [ 30.157426] [drm] Loading R400
Microcode [ 30.157760] platform radeon_cp.0: firmware: requesting
radeon/R420_cp.bin [ 30.211401] [drm] radeon: ring at
0x0000000020000000 [ 30.211428] [drm] ring test succeeded in 1 usecs
[ 30.211715] [drm] radeon: ib pool ready. [ 30.211843] [drm] ib
test succeeded in 0 usecs [ 30.216046] [drm] Radeon Display
Connectors [ 30.216048] [drm] Connector 0: [ 30.216050] [drm] VGA
[ 30.216053] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 30.216055] [drm] Encoders: [ 30.216057] [drm] CRT1:
INTERNAL_DAC1 [ 30.216059] [drm] LCD1: INTERNAL_LVDS
[ 30.216060] [drm] Connector 1: [ 30.216062] [drm] S-video
[ 30.216063] [drm] Encoders: [ 30.216065] [drm] TV1:
INTERNAL_DAC2 [ 30.216067] [drm] Connector 2: [ 30.216068] [drm]
DVI-I [ 30.216070] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64
0x64 [ 30.216072] [drm] Encoders: [ 30.216074] [drm] DFP1:
INTERNAL_TMDS1 [ 30.340247] ------------[ cut here ]------------
[ 30.340255] WARNING:
at /build/buildd-linux-2.6_2.6.32-9-i386-0BnCTJ/linux-2.6-2.6.32/debian/build/source_i386_none/drivers/gpu/drm/drm_crtc_helper.c:1035
drm_helper_initial_config+0x3a/0x53 [drm_kms_helper]() [ 30.340260]
Hardware name: VGN-BX197XP [ 30.340261] No connectors reported
connected with modes [ 30.340264] Modules linked in: radeon(+) ttm
drm_kms_helper drm i2c_algo_bit ppdev lp parport sco bridge stp bnep
l2cap bluetooth acpi_cpufreq cpufreq_powersave cpufreq_userspace
cpufreq_stats cpufreq_conservative fuse firewire_sbp2 loop sg sr_mod
cdrom ext4 jbd2 crc16 ext2 snd_hda_codec_realtek snd_hda_intel
snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_midi
snd_rawmidi snd_seq_midi_event snd_seq gspca_vc032x snd_timer
snd_seq_device gspca_main ipw2200 pcmcia videodev v4l1_compat libipw
i2c_i801 snd yenta_socket soundcore joydev usbhid rsrc_nonstatic
i2c_core ums_cypress hid lib80211 snd_page_alloc rng_core psmouse
tpm_infineon wacom uinput tpm tifm_7xx1 pcmcia_core tifm_core
sony_laptop battery pcspkr ac serio_raw rfkill tpm_bios processor evdev
ext3 jbd mbcache sd_mod crc_t10dif ata_generic ide_pci_generic ide_core
ahci usb_storage ata_piix uhci_hcd sata_sil firewire_ohci intel_agp
video output firewire_core crc_itu_t ehci_hcd libata agpgart sky2
scsi_mod button usbcore nls_base thermal fan thermal_sys [last
unloaded: scsi_wait_scan] [ 30.340367] Pid: 1761, comm: modprobe Not
tainted 2.6.32-3-686 #1 [ 30.340370] Call Trace: [ 30.340379]
[<c1030bfd>] ? warn_slowpath_common+0x5e/0x8a [ 30.340383]
[<c1030c5b>] ? warn_slowpath_fmt+0x26/0x2a [ 30.340387]
[<f7c46c80>] ? drm_helper_initial_config+0x3a/0x53 [drm_kms_helper]
[ 30.340418] [<f7d88ae1>] ? radeon_modeset_init+0x45d/0x467 [radeon]
[ 30.340428] [<f7cd0e20>] ? drm_get_dev+0x2d3/0x397 [drm]
[ 30.340434] [<c1140fbd>] ? local_pci_probe+0xb/0xc [ 30.340442]
[<c1141907>] ? pci_device_probe+0x41/0x63 [ 30.340447]
[<c11a4786>] ? driver_probe_device+0x8a/0x11e [ 30.340450]
[<c11a485a>] ? __driver_attach+0x40/0x5b [ 30.340454] [<c11a41c9>] ?
bus_for_each_dev+0x37/0x5f [ 30.340457] [<c11a4659>] ?
driver_attach+0x11/0x13 [ 30.340461] [<c11a481a>] ?
__driver_attach+0x0/0x5b [ 30.340465] [<c11a3c91>] ?
bus_add_driver+0x99/0x1c5 [ 30.340469] [<c11a4a8b>] ?
driver_register+0x87/0xe0 [ 30.340473] [<c1141ad8>] ?
__pci_register_driver+0x33/0x89 [ 30.340492] [<f7d21000>] ?
radeon_init+0x0/0xa9 [radeon] [ 30.340496] [<c100113e>] ?
do_one_initcall+0x55/0x155 [ 30.340500] [<c1057b0d>] ?
sys_init_module+0xa7/0x1d7 [ 30.340504] [<c10030fb>] ?
sysenter_do_call+0x12/0x28 [ 30.340507] ---[ end trace
91e23c1bcbea0334 ]--- [ 30.340528] [drm] Initialized radeon 2.0.0
20080528 for 0000:01:00.0 on minor 0
- - -
Regards
Hans Liao
09:25:19 CST
Thu, Mar/25/2010
Reply to: