Bug#229850: xserver-xfree86: Nokia 446Xpro properly detected but sync incorrect
Here it is. I see the correct ranges in the output below. When
Debian Installer beta 4 is released, I'll probably do a reinstall from
scratch and see what happens.
For kicks, I just moved my /etc/X11/XF86Config-4 out of the way, ran
dpkg-reconfigure xserver-xfree86 in high priority mode accepting
defaults (where the system did actually believe that 1280x1024 at 85
Hz was my best mode) and then reran dexconfig. I got the same default
values as reported in my original bug report, not the values detected
below. I don't know whether that information is useful to you.
My system is very current -- my last apt-get dist-upgrade was on April
18.
--
Jay Berkenbilt <ejb@ql.org>
http://www.ql.org/q/
--------------------------------------
get-edid: get-edid version 1.4.1
Performing real mode VBE call
Interrupt 0x10 ax=0x4f00 bx=0x0 cx=0x0
Function supported
Call successful
VBE version 200
VBE string at 0x11110 "ATI MACH64"
VBE/DDC service about to be called
Report DDC capabilities
Performing real mode VBE call
Interrupt 0x10 ax=0x4f15 bx=0x0 cx=0x0
Function supported
Call successful
Monitor and video card combination does not support DDC1 transfers
Monitor and video card combination supports DDC2 transfers
0 seconds per 128 byte EDID block transfer
Screen is not blanked during DDC transfer
Reading next EDID block
VBE/DDC service about to be called
Read EDID
Performing real mode VBE call
Interrupt 0x10 ax=0x4f15 bx=0x1 cx=0x0
parse-edid: parse-edid version 1.4.1
Function supported
Call successful
parse-edid: EDID checksum passed.
# EDID version 1 revision 2
Section "Monitor"
# Block type: 2:0 3:fd
# Block type: 2:0 3:ff
# Block type: 2:0 3:fc
Identifier "Nokia 446XproNOK"
VendorName "NOK"
ModelName "Nokia 446XproNOK"
# Block type: 2:0 3:fd
HorizSync 30-107
VertRefresh 50-150
# Max dot clock not given
# Block type: 2:0 3:ff
# Block type: 2:0 3:fc
# DPMS capabilities: Active off:yes Suspend:yes Standby:yes
Mode "1600x1200" # vfreq 85.000Hz, hfreq 106.250kHz
DotClock 229.500000
HTimings 1600 1664 1856 2160
VTimings 1200 1201 1204 1250
Flags "+HSync" "+VSync"
EndMode
# Block type: 2:0 3:fd
# Block type: 2:0 3:ff
# Block type: 2:0 3:fc
EndSection
--------------------------------------
Reply to: