Bug#651579: closed by Paul Wise <pabs@debian.org> (BTS is not for user support)
i can't edit the page to fix it.
also the information is wrong.
just looked at the readme.txt the instructions says to download, it's
from another device!
On Fri, Dec 9, 2011 at 10:09 PM, Debian Bug Tracking System
<owner@bugs.debian.org> wrote:
> This is an automatic notification regarding your Bug report
> which was filed against the wiki.debian.org package:
>
> #651579: wiki.debian.org: device configuration page is outdated
>
> It has been closed by Paul Wise <pabs@debian.org>.
>
> Their explanation is attached below along with your original report.
> If this explanation is unsatisfactory and you have not received a
> better one in a separate message then please contact Paul Wise <pabs@debian.org> by
> replying to this email.
>
>
> --
> 651579: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=651579
> Debian Bug Tracking System
> Contact owner@bugs.debian.org with problems
>
>
> ---------- Forwarded message ----------
> From: Paul Wise <pabs@debian.org>
> To: 651579-done@bugs.debian.org
> Date: Sat, 10 Dec 2011 14:06:43 +0800
> Subject: BTS is not for user support
> The Debian bug tracking system is not for user support, please contact
> one of our support channels if you want support:
>
> http://www.debian.org/support
>
> --
> bye,
> pabs
>
> http://wiki.debian.org/PaulWise
>
>
> ---------- Forwarded message ----------
> From: gabriel b <descartavel1@gmail.com>
> To: Debian Bug Tracking System <submit@bugs.debian.org>
> Date: Fri, 09 Dec 2011 21:57:09 -0800
> Subject: wiki.debian.org: device configuration page is outdated
> Package: wiki.debian.org
> Severity: normal
>
> http://wiki.debian.org/rtl819x
>
> this page have a lot of manual instructions for Wheezy. I installed the net
> install image for this week and it worked out of the box.
>
> And the instructions for Squeeze did not work.
>
> it worked until step 5. `modprobe r8192_pci`. that didn't load any module or
> gave me any error.
>
>
>
> 05:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE
> 802.11b/g/n WiFi Adapter (rev 01)
> Subsystem: Realtek Semiconductor Co., Ltd. Device 8195
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 11
> Region 0: I/O ports at 2000 [size=256]
> Region 2: Memory at f0900000 (64-bit, non-prefetchable) [size=16K]
> Capabilities: [40] Power Management version 3
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
> Address: 0000000000000000 Data: 0000
> Capabilities: [70] Express (v2) Endpoint, MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns,
> L1 <64us
> ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
> TransPend-
> LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency
> L0 <512ns, L1 <64us
> ClockPM+ Surprise- LLActRep- BwNot-
> LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain-
> CommClk-
> ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
> DLActive- BWMgmt- ABWMgmt-
> DevCap2: Completion Timeout: Not Supported, TimeoutDis+
> DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
> LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance-
> SpeedDis-, Selectable De-emphasis: -6dB
> Transmit Margin: Normal Operating Range,
> EnterModifiedCompliance- ComplianceSOS-
> Compliance De-emphasis: -6dB
> LnkSta2: Current De-emphasis Level: -6dB
> Capabilities: [100 v1] Advanced Error Reporting
> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
> RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
> RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
> RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
> AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
> Capabilities: [140 v1] Virtual Channel
> Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
> Arb: Fixed- WRR32- WRR64- WRR128-
> Ctrl: ArbSelect=Fixed
> Status: InProgress-
> VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
> Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
> Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
> Status: NegoPending- InProgress-
> Capabilities: [160 v1] Device Serial Number 01-91-81-fe-ff-4c-e0-00
>
>
>
> -- System Information:
> Debian Release: 6.0.3
> APT prefers stable
> APT policy: (500, 'stable')
> Architecture: i386 (i686)
>
> Kernel: Linux 2.6.32-5-686 (SMP w/2 CPU cores)
> Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
> Shell: /bin/sh linked to /bin/dash
>
>
>
Reply to: