Re: Wheezy Driver for Intel RMS25CB080 RAID Controller
On Fri, Dec 28, 2012 at 05:02:49PM -0800, Ron wrote:
>
> Setting linux kernel boot parameter pci=conf1 allows my Intel RAID
> Controller-RMS25PB080 (LSI 2208/Fusion based) to be detected, and the FW to
> transition to Ready state. Without this setting the Card FW responds only
> with 0xF0000000 Fault (Masked).
>
> I found linux kernel series 3.0.0, properly discovered and used the RAID
> card. Things broke in kernel series 3.2.0, onward. So this means in my Intel
> s2600 system, using the Intel/LSI card I have confirmed broken PCI discovery
> in kernels 3.2 up to current day 3.7.1 kernels.
>
> Details:
> Card PCI ID: 1000:005b
> Card PCI description: LSI Logic / Symbios Logic MegaRAID SAS 2208
> [Thunderbolt] (rev 03) aka Fusion
> Card Firmware Version: v23.9.0-0018 (most current to-date)
> Card OEM: Intel RAID Module (Card) RMS25PB080 SAS
> System Board: s2600CP - E5-2600 Xeon, LGA2011 Socket
> System Firmware BIOS level: 01.06.0002 2012/11/15 (most current to-date)
Is there a question in here somewhere? Otherwise you have sent it to the
wrong list.
--
"If you're not careful, the newspapers will have you hating the people
who are being oppressed, and loving the people who are doing the
oppressing." --- Malcolm X
Reply to: