[solved but annoying] XORG.CONF or a solution without xorg.conf needed
Hi all, hi Andrei,
the first trial, when ignoring the mouse wheel issue, was successful.
Oh, wait, I've forgotten to check the resolution, but the session
started and the frequency was at 90 Hz and I bet the wanted resolution
is available too. Anyway, there is something annoying. At startup and
shutdown, several times, perhaps more than 5 times, there's the
monitor's relay switching. Not really good for the relay :(. Usually,
e.g. for Ubuntu Maverick, Natty and Suse 11.2, the relay only one time
does switch.
Anyway, there's no issue regarding to monitor settings.
Perhaps it's useful for someone to use my xorg.conf as a template.
The rough (first trial :), working xorg.conf is attached.
Thank you,
Ralf
PS: Still bad that the mouse wheel does not work.
Section "Module"
Load "extmod"
Load "dri"
Load "dbe"
Load "dri2"
Load "glx"
Load "record"
#Load "GLcore"
#Load "v4l"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Plug 'n' Play"
ModelName "Plug 'n' Play"
DisplaySize 305 230
HorizSync 29-98
VertRefresh 50-120
modeline "1152x864" 128.42 1152 1232 1360 1568 864 865 868 910
Gamma 1.0
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "VideoKey" # <i>
#Option "MergedFB" "off" #old debian/ubuntu
Identifier "Card0"
#Driver "nvidia"
#Driver "nv"
Driver "nouveau"
VendorName "nVidia Corporation"
BoardName "G72 [GeForce 7300 SE/7200 GS]"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
Defaultdepth 24
SubSection "Display"
Depth 24
Modes "1152x864"
#Virtual 3840 1200
EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 1
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 4
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 8
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 15
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 16
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 24
# EndSubSection
EndSection
Reply to: