[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Ad-Hoc Wi-Fi Network Setup



Hi,

I'm trying to setup an ad-hoc Wi-Fi network, but having trouble to get
it working. Below are the steps I follow.

  foo# iwconfig wlan0 mode ad-hoc chan 11 essid inci
  foo# ifconfig wlan0 192.168.1.1

  bar# iwconfig wlan0 mode ad-hoc chan 11 essid inci
  bar# ifconfig wlan0 192.168.1.2
  bar# ping 192.168.1.1 -I wlan0

But ping fails miserably. What might I be missing? (See the detailed
command outputs in the attachment.)


Best.

------------------------------------------------------------------------

foo# lspci | grep Atheros
07:04.0 Network controller: Atheros Communications Inc. AR922X Wireless Network Adapter (rev 01)

foo# iwconfig wlan0 mode ad-hoc chan 11 essid inci
foo# iwconfig wlan0
wlan0     IEEE 802.11bgn  ESSID:"inci"
          Mode:Ad-Hoc  Frequency:2.462 GHz  Cell: E6:65:50:32:B9:13
          Tx-Power=20 dBm
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:on

foo# ifconfig wlan0 192.168.1.1
foo# ifconfig wlan0
wlan0     Link encap:Ethernet  HWaddr 94:0c:6d:ea:c2:4b
          inet addr:192.168.1.1  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::960c:6dff:feea:c24b/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:62 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:9688 (9.6 KB)

bar# lspci | grep Atheros
07:04.0 Network controller: Atheros Communications Inc. AR922X Wireless Network Adapter (rev 01)

bar# iwconfig wlan0 mode ad-hoc chan 11 essid inci
bar# iwconfig wlan0
wlan0     IEEE 802.11bgn  ESSID:"inci"
          Mode:Ad-Hoc  Frequency:2.462 GHz  Cell: Not-Associated
          Tx-Power=20 dBm
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:on

bar# ifconfig wlan0 192.168.1.2
bar# ifconfig wlan0
wlan0     Link encap:Ethernet  HWaddr 94:0c:6d:ea:b5:a4
          inet addr:192.168.1.2  Bcast:192.168.1.255  Mask:255.255.255.0
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:25 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:4434 (4.4 KB)

------------------------------------------------------------------------


Reply to: