Troobleshooting boot
Dear Debian users,
I have trouble running Debian Squeeze on my machine. The installation
process successfully completes, but most of the time (19 times in 20?)
the kernel stalls after displaying its `Loading ...' message. Any hint
to help me fix this would be much appreciated!
My machine is built around an asus m4a88td-m motherboard and an AMD
Phenom processor which I recently bought to encode several gigabytes of
MPEG2-TS video data. Unfortunately I am unable to run reliably Debian
Squeeze on this machine.
I have currently a double boot FreeBSD/Debian Squueze there, and to be
honnest the last time I seriously used a Debian system was back when
`Potato' was the hot thing ... my experience is probably not of much
help any more. (It seems you do not even have dselect anymore, have you?)
To understand what was going on, I started several times in a row the
machine in `recovery mode' from the Grub menu, but I always had
different messages showing up on the display's tail. I guessed that the
kernel was operating a kind of parallel initialisation, and I could not
figure out how to disable it to get a sensible error message on the console.
When the machine dares to start under Debian Squeeze, it is stable and
works without error.
I also have FreeBSD 8.1 installed on the machine, it works fine and
reliably so I can use it to get informations on the machine, like the
precise names of the chipsets there and the pci information.
Here is the output of `dmesg' it contains the output generated by the
kernel, and incidentially the list of chipsets on my system.
---8<---
Copyright (c) 1992-2011 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.2-STABLE #0: Sat Mar 19 14:23:55 CET 2011
root@llea.celt.neu:/usr/obj/usr/src/sys/LLEA amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Phenom(tm) II X6 1090T Processor (3214.25-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x100fa0 Family = 10 Model = a
Stepping = 0
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x802009<SSE3,MON,CX16,POPCNT>
AMD
Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
AMD
Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT>
TSC: P-state invariant
real memory = 8589934592 (8192 MB)
avail memory = 8248184832 (7866 MB)
ACPI APIC Table: <061010 APIC2128>
FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs
FreeBSD/SMP: 1 package(s) x 6 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
acpi0: <061010 XSDT2128> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of fee00000, 1000 (3) failed
acpi0: reservation of ffb80000, 80000 (3) failed
acpi0: reservation of fec10000, 20 (3) failed
acpi0: reservation of fed40000, 5000 (3) failed
acpi0: reservation of fed80000, 1000 (3) failed
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, cff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
acpi_ec0: <Embedded Controller: GPE 0xa> port 0x62,0x66 on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem
0xd0000000-0xdfffffff,0xfe8e0000-0xfe8fffff irq 18 at device 0.0 on pci1
hdac0: <ATI (Unknown) High Definition Audio Controller> mem
0xfe8bc000-0xfe8bffff irq 19 at device 0.1 on pci1
hdac0: HDA Driver Revision: 20100226_0142
hdac0: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> irq 19 at device 7.0 on pci0
pci2: <ACPI PCI bus> on pcib2
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfe9fe000-0xfe9fffff irq
19 at device 0.0 on pci2
xhci0: [ITHREAD]
usbus0 on xhci0
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 9.0 on pci0
pci3: <ACPI PCI bus> on pcib3
atapci0: <VIA ATA controller> port
0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f
irq 17 at device 0.0 on pci3
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
pcib4: <ACPI PCI-PCI bridge> irq 18 at device 10.0 on pci0
pci4: <ACPI PCI bus> on pcib4
re0: <RealTek 8168/8111 B/C/CP/D/DP/E PCIe Gigabit Ethernet> port
0xe800-0xe8ff mem 0xfdfff000-0xfdffffff,0xfdff8000-0xfdffbfff irq 18 at
device 0.0 on pci4
re0: Using 1 MSI-X message
re0: Chip rev. 0x2c000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0: 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX,
100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master,
1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow,
1000baseT-FDX-flow-master, auto, auto-flow
re0: Ethernet address: 20:cf:30:ac:09:e1
re0: [ITHREAD]
atapci1: <ATI IXP700/800 SATA300 controller> port
0xb000-0xb007,0xa000-0xa003,0x9000-0x9007,0x8000-0x8003,0x7000-0x700f
mem 0xfe7ffc00-0xfe7fffff irq 19 at device 17.0 on pci0
atapci1: [ITHREAD]
atapci1: AHCI v1.20 controller with 4 6Gbps ports, PM supported
ata4: <ATA channel 0> on atapci1
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci1
ata5: [ITHREAD]
ata6: <ATA channel 2> on atapci1
ata6: [ITHREAD]
ata7: <ATA channel 3> on atapci1
ata7: [ITHREAD]
ohci0: <OHCI (generic) USB controller> mem 0xfe7fe000-0xfe7fefff irq 18
at device 18.0 on pci0
ohci0: [ITHREAD]
usbus1: <OHCI (generic) USB controller> on ohci0
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe7ff800-0xfe7ff8ff irq
17 at device 18.2 on pci0
ehci0: [ITHREAD]
usbus2: EHCI version 1.0
usbus2: <EHCI (generic) USB 2.0 controller> on ehci0
ohci1: <OHCI (generic) USB controller> mem 0xfe7fd000-0xfe7fdfff irq 18
at device 19.0 on pci0
ohci1: [ITHREAD]
usbus3: <OHCI (generic) USB controller> on ohci1
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe7ff400-0xfe7ff4ff irq
17 at device 19.2 on pci0
ehci1: [ITHREAD]
usbus4: EHCI version 1.0
usbus4: <EHCI (generic) USB 2.0 controller> on ehci1
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci2: <ATI IXP700/800 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0
ata0: <ATA channel 0> on atapci2
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci2
ata1: [ITHREAD]
hdac1: <ATI SB600 High Definition Audio Controller> mem
0xfe7f8000-0xfe7fbfff irq 16 at device 20.2 on pci0
hdac1: HDA Driver Revision: 20100226_0142
hdac1: [ITHREAD]
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib5: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci5: <ACPI PCI bus> on pcib5
ral0: <Ralink Technology RT2560> mem 0xfebfe000-0xfebfffff irq 20 at
device 5.0 on pci5
ral0: MAC/BBP RT2560 (rev 0x04), RF RT2525
ral0: [ITHREAD]
ohci2: <OHCI (generic) USB controller> mem 0xfe7fc000-0xfe7fcfff irq 18
at device 20.5 on pci0
ohci2: [ITHREAD]
usbus5: <OHCI (generic) USB controller> on ohci2
ohci3: <OHCI (generic) USB controller> mem 0xfe7f7000-0xfe7f7fff irq 18
at device 22.0 on pci0
ohci3: [ITHREAD]
usbus6: <OHCI (generic) USB controller> on ohci3
ehci2: <EHCI (generic) USB 2.0 controller> mem 0xfe7ff000-0xfe7ff0ff irq
17 at device 22.2 on pci0
ehci2: [ITHREAD]
usbus7: EHCI version 1.0
usbus7: <EHCI (generic) USB 2.0 controller> on ehci2
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppc0: [ITHREAD]
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
aibs0: <ASUSTeK AI Booster (ACPI ASOC ATK0110)> on acpi0
aibs0: V0: 0x06020000 Vcore Voltage 850 / 1600 0x1
aibs0: V1: 0x06020001 +3.3 Voltage 2970 / 3630 0x1
aibs0: V2: 0x06020002 +5 Voltage 4500 / 5500 0x1
aibs0: V3: 0x06020003 +12 Voltage 10200 / 13800 0x1
aibs0: T0: 0x06030000 CPU Temperature 600 / 950 0x10001
aibs0: T1: 0x06030001 MB Temperature 450 / 750 0x10001
aibs0: F0: 0x06040000 CPU FAN Speed 600 / 7200 0x10001
aibs0: F1: 0x06040001 CHASSIS FAN Speed 600 / 7200 0x10001
acpi_hpet1: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
acpi0
device_attach: acpi_hpet1 attach returned 12
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
orm0: <ISA Option ROM> at iomem 0xc0000-0xce7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based
forwarding disabled, default to deny, logging disabled
usbus0: 4.8Gbps Super Speed USB v3.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 480Mbps High Speed USB v2.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ugen0.1: <0x1033> at usbus0
uhub0: <0x1033 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen1.1: <ATI> at usbus1
uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <ATI> at usbus2
uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen3.1: <ATI> at usbus3
uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <ATI> at usbus4
uhub4: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
ugen5.1: <ATI> at usbus5
uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <ATI> at usbus6
uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <ATI> at usbus7
uhub7: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
acd0: DVDR <PHILIPS SPD2411P/BP01> at ata2-master UDMA33
ad8: 152627MB <Seagate ST3160215AS 4.AAB> at ata4-master UDMA100 SATA
1.5Gb/s
ad10: 238475MB <MAXTOR STM3250820AS 3.AAE> at ata5-master UDMA100 SATA
1.5Gb/s
ad12: 476940MB <SAMSUNG HD501LJ CR100-10> at ata6-master UDMA100 SATA 3Gb/s
hdac0: HDA Codec #0: ATI R6xx HDMI
pcm0: <HDA ATI R6xx HDMI PCM #0 HDMI> at cad 0 nid 1 on hdac0
hdac1: HDA Codec #0: Realtek ALC892
pcm1: <HDA Realtek ALC892 PCM #0 Analog> at cad 0 nid 1 on hdac1
pcm2: <HDA Realtek ALC892 PCM #1 Analog> at cad 0 nid 1 on hdac1
pcm3: <HDA Realtek ALC892 PCM #2 Digital> at cad 0 nid 1 on hdac1
pcm4: <HDA Realtek ALC892 PCM #3 Digital> at cad 0 nid 1 on hdac1
uhub5: 2 ports with 2 removable, self powered
uhub6: 4 ports with 4 removable, self powered
uhub1: 5 ports with 5 removable, self powered
uhub3: 5 ports with 5 removable, self powered
uhub0: 4 ports with 4 removable, self powered
uhub7: 4 ports with 4 removable, self powered
uhub2: 5 ports with 5 removable, self powered
uhub4: 5 ports with 5 removable, self powered
ugen7.2: <Generic> at usbus7
umass0: <Generic Mass Storage Device, class 0/0, rev 2.00/1.00, addr 2>
on usbus7
umass0: SCSI over Bulk-Only; quirks = 0x4001
ugen3.2: <Microsoft> at usbus3
ums0: <Microsoft Microsoft Basic Optical Mouse v2.0, class 0/0, rev
1.10/1.99, addr 2> on usbus3
ums0: 3 buttons and [XYZ] coordinates ID=0
umass0:4:0:-1: Attached to scbus4
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
(probe0:ata2:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:ata2:0:0:0): CAM status: SCSI Status Error
(probe0:ata2:0:0:0): SCSI status: Check Condition
(probe0:ata2:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
cd0 at ata2 bus 0 scbus0 target 0 lun 0
cd0: <PHILIPS SPD2411P BP01> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
SMP: AP CPU #1 Launched!da0 at umass-sim0 bus 0 scbus4 target 0 lun 0
da0: <Generic USB SD Reader 1.00> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
SMP: AP CPU #3 Launched!
da1 at umass-sim0 bus 0 scbus4 target 0 lun 1
da1: <Generic USB CF Reader 1.01> Removable Direct Access SCSI-0 device
SMP: AP CPU #5 Launched!
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
SMP: AP CPU #4 Launched!
da2 at umass-sim0 bus 0 scbus4 target 0 lun 2
da2: <Generic USB SM Reader 1.02> Removable Direct Access SCSI-0 device
da2: 40.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not
presentSMP: AP CPU #2 Launched!
hwpmc: TSC/1/64/0x20<REA> K8/4/48/0x1ff<INT,USR,SYS,EDG,THR,REA,WRI,INV,QUA>
da3 at umass-sim0 bus 0 scbus4 target 0 lun 3
da3: <Generic USB MS Reader 1.03> Removable Direct Access SCSI-0 device
da3: 40.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad8s1a
re0: link state changed to UP
---8<---
And here is the output of `pciconf -l -v -h` listing the PCI devices on
my machine, it is probably redundant but maybe also useful.
---8<---
hostb0@pci0:0:0:0: class=0x060000 card=0x843e1043 chip=0x96011022
rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
class = bridge
subclass = HOST-PCI
pcib1@pci0:0:2:0: class=0x060400 card=0x843e1043 chip=0x96031022
rev=0x00 hdr=0x01
vendor = 'Advanced Micro Devices (AMD)'
class = bridge
subclass = PCI-PCI
pcib2@pci0:0:7:0: class=0x060400 card=0x843e1043 chip=0x96071022
rev=0x00 hdr=0x01
vendor = 'Advanced Micro Devices (AMD)'
class = bridge
subclass = PCI-PCI
pcib3@pci0:0:9:0: class=0x060400 card=0x843e1043 chip=0x96081022
rev=0x00 hdr=0x01
vendor = 'Advanced Micro Devices (AMD)'
class = bridge
subclass = PCI-PCI
pcib4@pci0:0:10:0: class=0x060400 card=0x843e1043 chip=0x96091022
rev=0x00 hdr=0x01
vendor = 'Advanced Micro Devices (AMD)'
class = bridge
subclass = PCI-PCI
atapci1@pci0:0:17:0: class=0x01018f card=0x84431043 chip=0x43901002
rev=0x40 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'Integrated SATA II Controller (SB700)'
class = mass storage
subclass = ATA
ohci0@pci0:0:18:0: class=0x0c0310 card=0x84431043 chip=0x43971002
rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'SB700 USB OHCI0 Controller'
class = serial bus
subclass = USB
ehci0@pci0:0:18:2: class=0x0c0320 card=0x84431043 chip=0x43961002
rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'SB700 USB EHCI Controller'
class = serial bus
subclass = USB
ohci1@pci0:0:19:0: class=0x0c0310 card=0x84431043 chip=0x43971002
rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'SB700 USB OHCI0 Controller'
class = serial bus
subclass = USB
ehci1@pci0:0:19:2: class=0x0c0320 card=0x84431043 chip=0x43961002
rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'SB700 USB EHCI Controller'
class = serial bus
subclass = USB
none0@pci0:0:20:0: class=0x0c0500 card=0x00000000 chip=0x43851002
rev=0x42 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'ATI SMBus (ATI RD600/RS600)'
class = serial bus
subclass = SMBus
atapci2@pci0:0:20:1: class=0x01018a card=0x84431043 chip=0x439c1002
rev=0x40 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'PATA 133 Controller (SB7xx)'
class = mass storage
subclass = ATA
hdac1@pci0:0:20:2: class=0x040300 card=0x841b1043 chip=0x43831002
rev=0x40 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'IXP SB600 High Definition Audio Controller'
class = multimedia
subclass = HDA
isab0@pci0:0:20:3: class=0x060100 card=0x84431043 chip=0x439d1002
rev=0x40 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'SB700 LPC host controller'
class = bridge
subclass = PCI-ISA
pcib5@pci0:0:20:4: class=0x060401 card=0x00000000 chip=0x43841002
rev=0x40 hdr=0x01
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'IXP SB600 PCI to PCI Bridge'
class = bridge
subclass = PCI-PCI
ohci2@pci0:0:20:5: class=0x0c0310 card=0x84431043 chip=0x43991002
rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'SB700 USB OHCI2 Controller'
class = serial bus
subclass = USB
ohci3@pci0:0:22:0: class=0x0c0310 card=0x84431043 chip=0x43971002
rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'SB700 USB OHCI0 Controller'
class = serial bus
subclass = USB
ehci2@pci0:0:22:2: class=0x0c0320 card=0x84431043 chip=0x43961002
rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'SB700 USB EHCI Controller'
class = serial bus
subclass = USB
hostb1@pci0:0:24:0: class=0x060000 card=0x00000000 chip=0x12001022
rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = '(Family 10h) Athlon64/Opteron/Sempron HyperTransport
Technology Configuration'
class = bridge
subclass = HOST-PCI
hostb2@pci0:0:24:1: class=0x060000 card=0x00000000 chip=0x12011022
rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = '(Family 10h) Athlon64/Opteron/Sempron Address Map'
class = bridge
subclass = HOST-PCI
hostb3@pci0:0:24:2: class=0x060000 card=0x00000000 chip=0x12021022
rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = '(Family 10h) Athlon64/Opteron/Sempron DRAM Controller'
class = bridge
subclass = HOST-PCI
hostb4@pci0:0:24:3: class=0x060000 card=0x00000000 chip=0x12031022
rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = '(Family 10h) Athlon64/Opteron/Sempron Miscellaneous
Control'
class = bridge
subclass = HOST-PCI
hostb5@pci0:0:24:4: class=0x060000 card=0x00000000 chip=0x12041022
rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = '(Family 10h) Athlon64/Opteron/Sempron Link Control'
class = bridge
subclass = HOST-PCI
vgapci0@pci0:1:0:0: class=0x030000 card=0xe134174b chip=0x68f91002
rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
class = display
subclass = VGA
hdac0@pci0:1:0:1: class=0x040300 card=0xaa68174b chip=0xaa681002
rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
class = multimedia
subclass = HDA
xhci0@pci0:2:0:0: class=0x0c0330 card=0x84131043 chip=0x01941033
rev=0x03 hdr=0x00
vendor = 'NEC Electronics Hong Kong'
class = serial bus
subclass = USB
atapci0@pci0:3:0:0: class=0x010185 card=0x838f1043 chip=0x04151106
rev=0x00 hdr=0x00
vendor = 'VIA Technologies, Inc.'
class = mass storage
subclass = ATA
re0@pci0:4:0:0: class=0x020000 card=0x84321043 chip=0x816810ec rev=0x06
hdr=0x00
vendor = 'Realtek Semiconductor'
device = 'Gigabit Ethernet NIC(NDIS 6.0) (RTL8168/8111/8111c)'
class = network
subclass = ethernet
ral0@pci0:5:5:0: class=0x028000 card=0x68341462 chip=0x02011814 rev=0x01
hdr=0x00
vendor = 'Ralink Technology, Corp.'
device = 'Ralink Chipset 802.11b/g WLAN Card ( RT2560F)'
class = network
---8<---
Any advice to troubleshoot the boot of my sSquueze system would be very
much appreciated!
--
Michael
Reply to: