IRQ 19 Problem in Squeeze & Wheezy but Sid OK
Linux Version 2.6.32-5-amd64
Compiled #1 SMP Wed Jan 12 03:40:32 UTC 2011
Two 1GHz AMD Athlon 64 X2 Processors, 4GB RAM
3999.52 Bogomips Total
I installed, back in February, Squeeze on 3 partitions. For 2 days
Squeeze worked fine with wicd but then quit with this error:
____
eb 22 12:13:10 dj kernel: [ 604.383622] wlan0: authenticate with 00:21:e8:b5:c4:b5 (try 1)
Feb 22 12:13:10 dj kernel: [ 604.580045] wlan0: authenticate with 00:21:e8:b5:c4:b5 (try 2)
Feb 22 12:13:10 dj kernel: [ 604.780042] wlan0: authenticate with 00:21:e8:b5:c4:b5 (try 3)
Feb 22 12:13:10 dj kernel: [ 604.953908] Pid: 0, comm: kworker/0:0 Not tainted 2.6.37-1-amd64 #1
Feb 22 12:13:10 dj kernel: [ 604.953910] Call Trace:
Feb 22 12:13:10 dj kernel: [ 604.953912] <IRQ> [<ffffffff81092ff1>] ? __report_bad_irq+0x30/0x80
Feb 22 12:13:10 dj kernel: [ 604.953923] [<ffffffff81093168>] ? note_interrupt+0x127/0x19f
Feb 22 12:13:10 dj kernel: [ 604.953927] [<ffffffff8100f6d5>] ? sched_clock+0x5/0x8
Feb 22 12:13:10 dj kernel: [ 604.953931] [<ffffffff81093b47>] ? handle_fasteoi_irq+0xcc/0xf7
Feb 22 12:13:10 dj kernel: [ 604.953935] [<ffffffff8100bf48>] ? handle_irq+0x17/0x1f
Feb 22 12:13:10 dj kernel: [ 604.953938] [<ffffffff8100b603>] ? do_IRQ+0x50/0xb5
Feb 22 12:13:10 dj kernel: [ 604.953942] [<ffffffff8131ef13>] ? ret_from_intr+0x0/0x11
Feb 22 12:13:10 dj kernel: [ 604.953944] <EOI> [<ffffffff81028108>] ? native_safe_halt+0x2/0x3
Feb 22 12:13:10 dj kernel: [ 604.953951] [<ffffffff81010a95>] ? default_idle+0x39/0x57
Feb 22 12:13:10 dj kernel: [ 604.953954] [<ffffffff81010bac>] ? c1e_idle+0xf9/0xfd
Feb 22 12:13:10 dj kernel: [ 604.953957] [<ffffffff81008be9>] ? cpu_idle+0xb2/0x124
Feb 22 12:13:10 dj kernel: [ 604.953960] [<ffffffff81317db4>] ? start_secondary+0x1e5/0x1eb
Feb 22 12:13:10 dj kernel: [ 604.980023] wlan0: authentication with 00:21:e8:b5:c4:b5 timed out
Message from syslogd@dj at Tue Feb 22 12:13:10 2011 ...
dj kernel: [ 604.953998] Disabling IRQ #19
I then upgraded the 2nd Squeeze partition to Testing/Wheezy and the same
error occurred as above.
After many upgrade the log messages have changed, somewhat, but the
problem remains. This line was the change
___
irq 19: nobody cared (try booting with the "irqpoll" option)
which I have done on both with no change noticeable.
In addition any login on tty1 gets
After many upgrade the log messages have changed, somewhat, but the
problem remains. This line was the change
which I have done on both with no change noticeable other the
line about trying irqpoll being gone.
______
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
-bash: no job control in this shell <<<<<<<<<<< Only on tty1
I then upgraded the 3rd partition to testing then to Sid. It works
fine without ANY of above problems. After an upgrade a few days ago
the wlan0 interface times out in less then the lease time though.
It seems like a kernel error but all 3 partitions are running the same
kernel. I did try the 2.6.37 kernel in Wheezy but the problem remains.
Here is the current log message for both Squeeze & Wheezy
___
Mar 20 12:29:34 dj kernel: [ 68.088593] ath9k 0000:03:00.0: PCI INT A
disabled
Mar 20 12:29:34 dj kernel: [ 68.088623] ath9k: Driver unloaded
Mar 20 12:29:34 dj kernel: [ 68.228646] cfg80211: Using static
regulatory domain info
Mar 20 12:29:34 dj kernel: [ 68.228649] cfg80211: Regulatory domain: US
Mar 20 12:29:34 dj kernel: [ 68.228651] ^I(start_freq - end_freq @
bandwidth), (max_antenna_gain, max_eirp)
Mar 20 12:29:34 dj kernel: [ 68.228654] ^I(2402000 KHz - 2472000 KHz @
40000 KHz), (600 mBi, 2700 mBm)
Mar 20 12:29:34 dj kernel: [ 68.228657] ^I(5170000 KHz - 5190000 KHz @
40000 KHz), (600 mBi, 2300 mBm)
Mar 20 12:29:34 dj kernel: [ 68.228659] ^I(5190000 KHz - 5210000 KHz @
40000 KHz), (600 mBi, 2300 mBm)
Mar 20 12:29:34 dj kernel: [ 68.228662] ^I(5210000 KHz - 5230000 KHz @
40000 KHz), (600 mBi, 2300 mBm)
Mar 20 12:29:34 dj kernel: [ 68.228664] ^I(5230000 KHz - 5330000 KHz @
40000 KHz), (600 mBi, 2300 mBm)
Mar 20 12:29:34 dj kernel: [ 68.228666] ^I(5735000 KHz - 5835000 KHz @
40000 KHz), (600 mBi, 3000 mBm)
Mar 20 12:29:34 dj kernel: [ 68.229107] cfg80211: Calling CRDA for
country: US
Mar 20 12:29:34 dj kernel: [ 68.245630] ath9k 0000:03:00.0: PCI INT A
-> GSI 19 (level, low) -> IRQ 19
Mar 20 12:29:34 dj kernel: [ 68.245642] ath9k 0000:03:00.0: setting
latency timer to 64
Mar 20 12:29:34 dj kernel: [ 68.370925] ath: EEPROM regdomain: 0x10
Mar 20 12:29:34 dj kernel: [ 68.370926] ath: EEPROM indicates we
should expect a direct regpair map
Mar 20 12:29:34 dj kernel: [ 68.370929] ath: Country alpha2 being used: CO
Mar 20 12:29:34 dj kernel: [ 68.370931] ath: Regpair used: 0x10
Mar 20 12:29:34 dj kernel: [ 68.371882] phy0: Selected rate control
algorithm 'ath9k_rate_control'
Mar 20 12:29:34 dj kernel: [ 68.373019] cfg80211: Calling CRDA for
country: CO
Mar 20 12:29:34 dj kernel: [ 68.373170] Registered led device:
ath9k-phy0::radio
Mar 20 12:29:34 dj kernel: [ 68.373188] Registered led device:
ath9k-phy0::assoc
Mar 20 12:29:34 dj kernel: [ 68.373205] Registered led device:
ath9k-phy0::tx
Mar 20 12:29:34 dj kernel: [ 68.373223] Registered led device:
ath9k-phy0::rx
Mar 20 12:29:34 dj kernel: [ 68.373232] phy0: Atheros AR5418 MAC/BB
Rev:2 AR2133 RF Rev:81: mem=0xffffc900165a0000, irq=19
Mar 20 12:29:40 dj kernel: [ 74.268771] ADDRCONF(NETDEV_UP): wlan0:
link is not ready
I have been troubleshooting this for a month now and have not found
anything I can pin it to.
There was a similar post a week or two ago about IRQ 19 causing the
disks (IIRC) to restart but I have not heard of any solutions yet.
Google has a bunch of IRQ 19 problems on debian but they are over a year
old and no real solutions were found that I could find.
Any comments/suggestions would be sincerely appreciated.
Wayne
Reply to: