raid10 and lvm problem on new lenny install
this is what I have from fdisk -l, I have lvm on /dev/md1, md1 is a
raid10 array with 4x2T drives.
Disk /dev/md1: 4000.5 GB, 4000525058048 bytes
2 heads, 4 sectors/track, 976690688 cylinders
Units = cylinders of 8 * 512 = 4096 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 524288 bytes / 2097152 bytes
Disk identifier: 0x00000000
this is what I have from pvdisplay
--- Physical volume ---
PV Name /dev/md1
VG Name 2600k
PV Size 3.64 TiB / not usable 0
Allocatable yes
PE Size 4.00 MiB
Total PE 953799
Free PE 831052
Allocated PE 122747
PV UUID WUpkTR-xyCK-HGOc-Hk7Q-OfBp-Mqsz-GubCy7
I don't know why I only have a 3.64T pv size, it should be 4T I think,
in the installation of lenny i use ext3 for all the partitions,
also I set the unused space for each partition as 1%.
Thank you if you have an explanation or if you have ways to reclaim
the 0.36 T from my arrays.
Jim
Reply to: