Re: snmpwalk to remote address gives timeout

[Fabrice LORRAIN <debfab@free.fr>]

Bart wrote:
> I have 2 debian boxes, one at stable, the other one at testing.
>
> If i run "snmpwalk -v 1 -c public localhost system" at the testing box
> I get the results I expect:
> SNMPv2-MIB::sysDescr.0 = STRING: Linux Box2 2.6.19.061203 #1 Sun Dec 3
> 15:32:44 CET 2006 i686
> SNMPv2-MIB::sysObjectID.0 = OID: NET-SNMP-MIB::netSnmpAgentOIDs.10
> DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (493706) 1:22:17.06
> SNMPv2-MIB::sysContact.0 = STRING: Root <root@localhost> (configure
> /etc/snmp/snmpd.local.conf)
> ...
> [snip]
>
> However if I run "snmpwalk -v 1 -c public 192.168.1.36 system" on the
> stable box, with 192.168.1.36 the IP address of the testing box, i get:
> Timeout: No Response from 192.168.1.36
>
> snmpd is up and running, I can ping both ways, there are no firewalls
> in place. What could be wrong?

Is snmpd listening on your interfaces ?

Check with "sudo netstat -natup | grep 161" on the sarge box.

@+,
	Fab