Re: Memory card reader on Etch

[Jeff D <fixedored@gmail.com>]

Mirto Silvio Busico wrote:
> Sorry. Not posted to the list.
>
> Ron Johnson wrote:
>   
> > Mirto Silvio Busico wrote:
> >     
> > > > Hi all,
> > > >
> > > > where can I find information on using an integrated memory card reader?
> > > >
> > > > I have a Toshiba laptop with an integrated memory card reader.
> > > > I'm using Etch
> > > >         
> > It should "just work".  Are you having any specific problems?
> >
> >
> >     
> Probably I'm not able to see the memory card mounted.
> When I insert the memory card, I didn't see it not in mount, nor appears
> an icon (as it does for usb pen drive)..
> If I look at PCI elements I see:
> ...
> msb01:~# lspci
> 00:00.0 Host bridge: ATI Technologies Inc RS300 Host Bridge (rev 02)
> 00:01.0 PCI bridge: ATI Technologies Inc Radeon 9100 IGP AGP Bridge
> 00:13.0 USB Controller: ATI Technologies Inc OHCI USB Controller #1 (rev 01)
> 00:13.1 USB Controller: ATI Technologies Inc OHCI USB Controller #2 (rev 01)
> 00:13.2 USB Controller: ATI Technologies Inc EHCI USB Controller (rev 01)
> 00:14.0 SMBus: ATI Technologies Inc ATI SMBus (rev 1a)
> 00:14.1 IDE interface: ATI Technologies Inc ATI Dual Channel Bus Master
> PCI IDE Controller
> 00:14.3 ISA bridge: ATI Technologies Inc Unknown device 434c
> 00:14.4 PCI bridge: ATI Technologies Inc Unknown device 4342
> 00:14.5 Multimedia audio controller: ATI Technologies Inc IXP150 AC'97
> Audio Controller (rev 01)
> 00:14.6 Modem: ATI Technologies Inc IXP AC'97 Modem (rev 01)
> 01:05.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility
> Radeon 9600 M10]
> 02:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host
> Controller (rev 80)
> 02:02.0 Ethernet controller: Atheros Communications, Inc. AR5212
> 802.11abg NIC (rev 01)
> 02:03.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
> RTL-8139/8139C/8139C+ (rev 10)
> 02:04.0 CardBus bridge: ENE Technology Inc CB-710/2/4 Cardbus Controller
> 02:04.1 FLASH memory: ENE Technology Inc ENE PCI Memory Stick Card
> Reader Controller
> 02:04.2 Class 0805: ENE Technology Inc ENE PCI Secure Digital Card
> Reader Controller
> 02:04.3 FLASH memory: ENE Technology Inc FLASH memory: ENE Technology Inc:
> msb01:~#
> ...
>
> The last four lines seems to indicate that the card reader is working.
>
> Mybe I'm doing something wrong.
>
>     Mirto
>   

whats the dmesg output after you put the memory card in?  You might be 
able to find out what device its getting assigned to.