Re: 2.6 compilation woes...
On Wednesday 01 March 2006 05:32 pm, Doofus wrote:
> Hi,
>
> I hope someone can help me out here.
> I'm finding 2.6 quite complex compared with the 2.4 kernels which I
> understood and was comfortable with.
>
> I've recently installed sarge over the net and chose kernel 2.6 to
> initially run with. Everything worked well.
> I then got the 2.6 source from my debian mirror and did my first
> compilation (make menuconfig, make-kpkg clean, make-kpkg <revision>
> kernel_image, dpkg -i ../*.deb), using the default (and working) .config
> file in /boot as a starting point.
>
> This also went went well even though I still don't fully understand
> every aspect of the source tree.
>
> My problem:
> When I choose the newly compiled kernel from the grub boot menu I get,
> early in the boot process:
>
> Kernel panic: VFS: Unable to mount root fs on unknown-block (0,0)
>
>
> I resolved to do some more compiles, only making changes to the default
> configuration by one section at a time, in a process-of-elimination
> effort to find where the problem is, but even after the first
> compilation when the only change I'd made was the processor type, I
> still had the same boot failure.
>
> So, I cleaned the source tree and compiled another kernel using the
> completely unmodified .config file that came with the working default
> 2.6 sarge installaion. And you guessed it - another kernel panic.
>
> Now I'm bamboozled. If I compile a kernel using the identical .config
> file that was used to compile the working and running kernel and it
> won't boot properly, then my powers of fault finding dry up. I'd be
> mightily grateful if anyone can give me any ideas as to where the
> problem may lie, or other things to try.
>
>
> Configuration:
>
> Dell Inspiron 8200 P4 laptop
> hda1 /boot (ext2)
> hda2 WinXP (ntfs)
> hda3 FAT32
> hda5 /home (reiser)
> hda6 / (reiser)
> hda7 swap
>
>
> Original working and new unworking sections of menu.lst:
>
> title Debian GNU/Linux, kernel 2.6.8-2-686
> root (hd0,0)
> kernel /vmlinuz-2.6.8-2-686 root=/dev/hda6 ro
> initrd /initrd.img-2.6.8-2-686
> savedefault
> boot
>
>
> title Debian GNU/Linux, kernel 2.6.8
> root (hd0,0)
> kernel /vmlinuz-2.6.8 root=/dev/hda6 ro
> savedefault
> boot
>
>
> Thanks again for any help offered.
you didn't mention which one was the working stanza and which one was the non
working one.
you probably need the modules for riser fs either compiled into the kernel (if
you don't want an initrd line like in the second stanza), or, you can have it
built as a module but make sure mkinitrd knows to create the initrd with the
riserfs module in the initrd.
you may want to copy /etc/modules into /etc/mkinitrd/modules and tweak it so
that you only leave in the modules you need to boot with.
--
anoop
aaryal@foresightint.com
Reply to: