HP USB Mass Storage device issue
I'm having issues trying to partition/mount an usb device. The device
is a HP usb digital drive (looks like a small memstick). If anyone can
help or has suggestions please let me know.
When I insert the device into the usb it is registered with hotplug:
------------- /var/log/messages
Feb 26 19:15:30 act kernel: usb 2-2: new full speed USB device using
address 11
Feb 26 19:15:30 act kernel: scsi8 : SCSI emulation for USB Mass Storage
devices
Feb 26 19:15:30 act kernel: Vendor: HP Model: Digital Drive
Rev: 1. 00
Feb 26 19:15:30 act kernel: Type: Direct-Access
ANSI SC SI revision: 02
Feb 26 19:15:30 act kernel: Attached scsi removable disk sda at scsi8,
channel 0 , id 0, lun 0
Feb 26 19:15:30 act scsi.agent[18757]: disk at
/devices/pci0000:00/0000:00:02.1/ usb2/2-2/2-2:1.0/host8/8:0:0:0
Feb 26 19:15:31 act usb.agent[18749]: usb-storage: already loaded
However, when I try to partition the disk it says "No medium found".
------------ partition steps
act:/home/atippett# fdisk /dev/sda
Unable to open /dev/sda
act:/home/atippett# cfdisk /dev/sda
act:/home/atippett# sfdisk /dev/sda
/dev/sda: No medium found
sfdisk: cannot open /dev/sda read-write
act:/home/atippett#
Here's my information from /proc
------------------
act:/home/atippett# cat /proc/scsi/usb-storage/9
Host scsi9: usb-storage
Vendor: Hewlett-Packard
Product: USB Digital Drive
Serial Number: None
Protocol: Transparent SCSI
Transport: Bulk
Quirks:
act:/home/atippett# cat /proc/scsi/scsi
Attached devices:
Host: scsi9 Channel: 00 Id: 00 Lun: 00
Vendor: HP Model: Digital Drive Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 02
act:/home/atippett#
--
Anthony
Reply to: