Re: More Problems with ATI Radeon 7200 - (EE) No devices detected.
Hello-
I compared our lspci -v output:
> 0000:01:00.0 VGA compatible controller: ATI
> Technologies Inc Radeon R100
> QD [Radeon 7200] (prog-if 00 [VGA])
Mine is residing at 0000:00:13.0 - I entered the bus
as PCI:00:13:0
> Subsystem: ATI Technologies Inc Radeon
> 7000/Radeon
Same.
> Flags: bus master, VGA palette snoop,
> stepping, 66MHz, medium
> devsel, latency 64, IRQ 16
No VGA palette snoop on mine and IRQ is 11.
> Memory at d8000000 (32-bit, prefetchable)
> [size=128M]
> I/O ports at c000 [size=256]
> Memory at e5000000 (32-bit,
> non-prefetchable) [size=512K]
> Capabilities: [58] AGP version 2.0
> Capabilities: [50] Power Management version 2
No mention of AGP version 2.0 in mine. There is also
mention of Expansion ROM 128k which is disabled.
> Do you make sure that the radeon module is loaded,
> 'lsmod|grep radeon'?
nope...I didn't. I did, and nothing happened. So,
perplexed, I just typed lsmod, and didn't see anything
about the PCI/AGP ports at all.
Here is my XF86Config-4 file
Section "Files"
FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall
back on these
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/CID"
FontPath "/usr/lib/X11/fonts/Speedo"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
EndSection
Section "Module"
Load "GLcore"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "speedo"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/psaux"
Option "Protocol" "PS/2"
EndSection
Section "InputDevice"
Identifier "Generic Mouse"
Driver "mouse"
Option "SendCoreEvents" "true"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
EndSection
Section "Device"
Identifier "ATI Radeon 7200"
Driver "ati"
BusID "PCI:00:13:0"
EndSection
Section "Monitor"
Identifier "Gateway EV500"
HorizSync 30-69
VertRefresh 50-110
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Radeon 7200"
Monitor "Gateway EV500"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "Generic Mouse"
EndSection
Section "DRI"
Mode 0666
EndSection
<snip other XF86Config-4 file>
> This layout works for me, compare it to yours, I am
> quite certain that
> there should only be a configuration error.
It doesn't seem too different to my untrained eye.
What do you suggest I change??
Thanks in advance.
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
Reply to: