[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Debian 3.0 Woody Module problem




I hate instaled Debian 3.0 r1 woody with bf24 kernel ( 2.4.18) i have select module of my lan card under the isntallation the module is via-rhine but when everythink was installed i have no lan I meen the module is loaded it is in use by eth0 but no ping to anyone .. the module is via-rhine im sure becouse under redhat and slackware i dont have this problem
I will list you lsmod :
Module                  Size  Used by    Not tainted
nls_cp437               4384   2  (autoclean)
via82cxxx_audio        18144   1
ac97_codec              9568   0  [via82cxxx_audio]
soundcore               3236   2  [via82cxxx_audio]
via-rhine              12452   1
keybdev                 1664   0  (unused)
usbkbd                  2848   0  (unused)
input                   3072   0  [keybdev usbkbd]
usb-uhci               20708   0  (unused)
usbcore                48032   0  [usbkbd usb-uhci]
this are modules under debian 2.4.18
the modules udner slackware are :
Module                  Size  Used by    Not tainted
snd-pcm-oss            37636   1
snd-mixer-oss          12400   0  [snd-pcm-oss]
uhci                   24508   0  (unused)
ehci-hcd               17644   0  (unused)
usbcore                59436   1  [uhci ehci-hcd]
snd-via82xx            12288   1
gameport                1420   0  [snd-via82xx]
snd-pcm                56232   0  [snd-pcm-oss snd-via82xx]
snd-timer              13572   0  [snd-pcm]
snd-ac97-codec         43404   0  [snd-via82xx]
snd-page-alloc          6356   0  [snd-via82xx snd-pcm]
snd-mpu401-uart         3216   0  [snd-via82xx]
snd-rawmidi            12768   0  [snd-mpu401-uart]
snd-seq-device          3888   0  [snd-rawmidi]
snd 30372 0 [snd-pcm-oss snd-mixer-oss snd-via82xx snd-pcm snd-timer snd-ac97-codec snd-mpu401-uart snd-rawmidi snd-seq-device]
soundcore               3396   4  [snd]
via-rhine              12464   1
mii                     2272   0  [via-rhine]
crc32                   2880   0  [via-rhine]
pcmcia_core            39972   0
ide-scsi                9360   0
agpgart 44036 0 (unused) and as i said under slackware it`s oki but under debian ... not work ? any ideas ?
P.S.
ifconfig :
eth0      Link encap:Ethernet  HWaddr 00:0A:E6:62:AF:11
        inet addr:192.168.1.2  Bcast:192.168.1.255  Mask:255.255.255.0
        UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
        RX packets:0 errors:0 dropped:7 overruns:0 frame:0
        TX packets:0 errors:4 dropped:0 overruns:0 carrier:0
        collisions:0 txqueuelen:100
        RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
Interrupt:16 Base address:0xe800
lo        Link encap:Local Loopback
        inet addr:127.0.0.1  Mask:255.0.0.0
        UP LOOPBACK RUNNING  MTU:16436  Metric:1
        RX packets:352 errors:0 dropped:0 overruns:0 frame:0
        TX packets:352 errors:0 dropped:0 overruns:0 carrier:0
        collisions:0 txqueuelen:0
RX bytes:17884 (17.4 KiB) TX bytes:17884 (17.4 KiB)
iptables -L
Chain INPUT (policy ACCEPT)
target prot opt source destination
Chain FORWARD (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
i hope somebody will answer me .
10x all



Reply to: