82815 graphics controller config in debian 3 woody
sir,
/etc/X11/XF86Config-4
Section "Module"
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
ModulePath "/usr/X11R6/lib/modules"
EndSection
Section "ServerFlags"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
Option "AutoRepeat" "500 30"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/psaux"
EndSection
Section "Monitor"
Identifier "vrt's monitor"
HorizSync 30-70
VertRefresh 50-160
EndSection
Section "Device"
Identifier "vrt's card"
Driver "i810"
VideoRam 2048
EndSection
Section "Screen"
Identifier "Screen 0"
Device "vrt's card"
Monitor "vrt's monitor"
DefaultDepth 8
Subsection "Display"
Depth 8
Modes "640x480" "800x600" "1024x768" "1280x1024"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "800x600" "1024x768"
ViewPort 0 0
EndSubsection
Subsection "Display"
Modes "800x600" "1024x768"
ViewPort 0 0
EndSubsection
EndSection
Section "ServerLayout"
Identifier "Simple Layout"
Screen "Screen 0"
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
|Error| on xinit
warning: process set to nice value 0 instead of -10 as requested
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to XFree86@XFree86.Org and patches submitted
to fixes@XFree86.Org. Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs)
XFree86 Version 4.1.0.1 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 21 December 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.6.9-rc1 i686 [ELF]
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Fri Oct 22 16:29:28 2004
(==) Using config file: "/etc/X11/XF86Config-4"
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 0" (0)
(**) | |-->Monitor "vrt's monitor"
(**) | |-->Device "vrt's card"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc101"
(**) XKB: layout: "us"
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(--) PCI:*(0:2:0) Intel i815 rev 4, Mem @ 0xd0000000/26, 0xd6000000/19
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.1.9
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/drivers/i810_drv.o
(II) Module i810: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) I810: Driver for Intel i810 chipset: i810, i810-dc100, i810e, i815
(--) Assigning device section with no busID to primary device
(--) Chipset i815 found
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
(**) I810(0): Depth 8, (--) framebuffer bpp 8
(==) I810(0): Default visual is PseudoColor
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) I810(0): initializing int10
(II) I810(0): Primary V_BIOS segment is: 0xc000
(II) I810(0): VESA BIOS detected
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) I810(0): VESA VBE DDC supported
(II) I810(0): Manufacturer: SAM Model: 1057 Serial#: 1146106167
(II) I810(0): Year: 2001 Week: 29
(II) I810(0): EDID Version: 1.1
(II) I810(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) I810(0): Sync: Separate
(II) I810(0): Max H-Image Size [cm]: horiz.: 32 vert.: 24
(II) I810(0): Gamma: 2.26
(II) I810(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) I810(0): redX: 0.645 redY: 0.321 greenX: 0.285 greenY: 0.600
(II) I810(0): blueX: 0.142 blueY: 0.057 whiteX: 0.283 whiteY: 0.298
(II) I810(0): Supported VESA Video Modes:
(II) I810(0): 720x400@70Hz
(II) I810(0): 720x400@88Hz
(II) I810(0): 640x480@60Hz
(II) I810(0): 640x480@67Hz
(II) I810(0): 640x480@72Hz
(II) I810(0): 640x480@75Hz
(II) I810(0): 800x600@56Hz
(II) I810(0): 800x600@60Hz
(II) I810(0): 800x600@72Hz
(II) I810(0): 800x600@75Hz
(II) I810(0): 832x624@75Hz
(II) I810(0): 1024x768@87Hz (interlaced)
(II) I810(0): 1024x768@60Hz
(II) I810(0): 1024x768@70Hz
(II) I810(0): 1024x768@75Hz
(II) I810(0): Manufacturer's mask: 0
(II) I810(0): Supported Future Video Modes:
(II) I810(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) I810(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) I810(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) I810(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) I810(0): Supported additional Video Mode:
(II) I810(0): clock: 94.5 MHz Image Size: 306 x 230 mm
(II) I810(0): h_active: 1024 h_sync: 1072 h_sync_end 1168
h_blank_end 1376 h_border: 0
(II) I810(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking:
808 v_border: 0
(II) I810(0): Supported additional Video Mode:
(II) I810(0): clock: 56.2 MHz Image Size: 306 x 230 mm
(II) I810(0): h_active: 800 h_sync: 832 h_sync_end 896 h_blank_end
1048 h_border: 0
(II) I810(0): v_active: 600 v_sync: 601 v_sync_end 604 v_blanking:
631 v_border: 0
(II) I810(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 70
kHz, PixClock max 110 MHz
(II) I810(0): Serial No: HMAR703546
(--) I810(0): Chipset: "i815"
(--) I810(0): Linear framebuffer at 0xD0000000
(--) I810(0): IO registers at addr 0xD6000000
(EE) Unable to open /dev/agpgart (No such device)
(**) I810(0): Will alloc AGP framebuffer: 2048 kByte
(==) I810(0): Using gamma correction (1.0, 1.0, 1.0)
(II) I810(0): vrt's monitor: Using hsync range of 30.00-70.00 kHz
(II) I810(0): vrt's monitor: Using vrefresh range of 50.00-160.00 Hz
(II) I810(0): Clock range: 12.00 to 203.00 MHz
(II) I810(0): Not using default mode "1024x768" (unknown reason)
(II) I810(0): Not using default mode "1280x960" (hsync out of range)
(II) I810(0): Not using default mode "1280x1024" (hsync out of range)
(II) I810(0): Not using default mode "1280x1024" (hsync out of range)
(II) I810(0): Not using default mode "1600x1200" (hsync out of range)
(II) I810(0): Not using default mode "1600x1200" (hsync out of range)
(II) I810(0): Not using default mode "1600x1200" (hsync out of range)
(II) I810(0): Not using default mode "1600x1200" (hsync out of range)
(II) I810(0): Not using default mode "1600x1200" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) I810(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) I810(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) I810(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) I810(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) I810(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) I810(0): Not using default mode "1400x1050" (hsync out of range)
(--) I810(0): Virtual size is 1280x1024 (pitch 2048)
(**) I810(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(**) I810(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(**) I810(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(**) I810(0): Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(--) I810(0): Display dimensions: (32, 24) cm
(--) I810(0): DPI set to (101, 108)
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
(==) I810(0): Write-combining range (0xd0000000,0x4000000)
(II) I810(0): Setting dot clock to 36.0 MHz [ 0x10 0x1 0x40 ] [ 18 3 4 ]
(II) I810(0): chose watermark 0x22007000: (tab.freq 36.0)
Fatal server error:
AddScreen/ScreenInit failed for driver 0
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to submit@bugs.debian.org.
X connection to :0.0 broken (explicit kill or server shutdown).
---------------------------------------------------------------------------------------------------------------------------------
i have an integrated 82815 graphics controller
i tried using the vesa driver
it was working well for 640x480@8bits
for higer depth 16 and 24, the screen was flickery...
pls help
thanks in advance
vinay
--
ACK and you shall receive -- old jugle saying
--
ACK and you shall receive -- old jugle saying
Reply to: