I/O Card on Debian (model Enter)

[Vijaya S <vijaya@picopeta.com>]

Hi all,
i have got a I/O Card which is a PCI to 2 Serial Port Card and the Model
is "Enter".
I have inserted into the PCI slot on the MB .
But i am not able to get it working or how do i configure it
The machine is having Debian 2.4.25 kernel on it

lspci -v output:

0000:00:0a.0 Serial controller: Timedia Technology Co Ltd PCI2S550 (Dual
16550 UART) (rev 01) (prog-if 02 [16550])
        Subsystem: Timedia Technology Co Ltd: Unknown device 4037
        Flags: stepping, medium devsel, IRQ 5
        I/O ports at b000 [size=32]


cat /proc/pci
Serial controller: Timedia Technology Co Ltd PCI2S550 (Dual 16550 UART)
(rev 1).
      IRQ 5.
      I/O at 0xb000 [0xb01f].

/bin.setserial -g /dev/ttyS? gives

/bin/setserial -g /dev/ttyS?
/dev/ttyS0, UART: 16550A, Port: 0x03f8, IRQ: 4
/dev/ttyS1, UART: 16550A, Port: 0x02f8, IRQ: 3
/dev/ttyS4, UART: 16550A, Port: 0xb000, IRQ: 5
/dev/ttyS5, UART: 16550A, Port: 0xb008, IRQ: 5

But when i do a minicom i am not able to get it working?
How do i configure it and get it working
Any modules or commands that i am missing?


Regards,
Vijaya