CVS over ssh hanging on testing
I took the plunge and upgraded testing today. All seems well so far
except for one thing: A "cvs update" on a remote host hangs. My CVS
repository is on the host where I did the upgrade. I use CVS_RSH=ssh.
A "cvs server" process does start on my local host.
If I use CVS_RSH=ssh-verbose, where ssh-verbose is a script, I get the
output below.
I'm not using cvs compression as this has caused similar hangs in the
past.
Thoughts?
[wohler@tassie:502]$ CVS_RSH=ssh-verbose cvs up
OpenSSH_3.4p1 Debian 1:3.4p1-1, SSH protocols 1.5/2.0, OpenSSL 0x0090603f
debug1: Reading configuration data /home/wohler/.ssh/config
debug1: Applying options for *
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Rhosts Authentication disabled, originating port will not be trusted.
debug1: ssh_connect: needpriv 0
debug1: Connecting to gbr.newt.com [63.205.66.193] port 22.
debug1: Connection established.
debug1: identity file /home/wohler/.ssh/identity type -1
debug1: identity file /home/wohler/.ssh/id_rsa type 1
debug1: identity file /home/wohler/.ssh/id_dsa type -1
debug1: Remote protocol version 1.99, remote software version OpenSSH_3.4p1 Debian 1:3.4p1-4
debug1: match: OpenSSH_3.4p1 Debian 1:3.4p1-4 pat OpenSSH*
Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_3.4p1 Debian 1:3.4p1-1
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug1: kex: server->client aes128-cbc hmac-md5 none
debug1: kex: client->server aes128-cbc hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug1: dh_gen_key: priv key bits set: 127/256
debug1: bits set: 1633/3191
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug1: Host 'gbr.newt.com' is known and matches the RSA host key.
debug1: Found key in /home/wohler/.ssh/known_hosts:1
debug1: bits set: 1545/3191
debug1: ssh_rsa_verify: signature correct
debug1: kex_derive_keys
debug1: newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: waiting for SSH2_MSG_NEWKEYS
debug1: newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: done: ssh_kex2.
debug1: send SSH2_MSG_SERVICE_REQUEST
debug1: service_accept: ssh-userauth
debug1: got SSH2_MSG_SERVICE_ACCEPT
debug1: authentications that can continue: publickey,password,keyboard-interactive
debug1: next auth method to try is publickey
debug1: try privkey: /home/wohler/.ssh/identity
debug1: try pubkey: /home/wohler/.ssh/id_rsa
debug1: input_userauth_pk_ok: pkalg ssh-rsa blen 149 lastkey 0x8088c10 hint 1
debug1: PEM_read_PrivateKey failed
debug1: read PEM private key done: type <unknown>
Enter passphrase for key '/home/wohler/.ssh/id_rsa':
debug1: read PEM private key done: type RSA
debug1: ssh-userauth2 successful: method publickey
debug1: fd 5 setting O_NONBLOCK
debug1: fd 7 setting O_NONBLOCK
debug1: channel 0: new [client-session]
debug1: send channel open 0
debug1: Entering interactive session.
debug1: ssh_session2_setup: id 0
debug1: Sending command: cvs server
debug1: channel request 0: exec
debug1: channel 0: open confirm rwindow 0 rmax 32768
debug1: channel_free: channel 0: client-session, nchannels 1
--
Bill Wohler <wohler@newt.com> http://www.newt.com/wohler/ GnuPG ID:610BD9AD
Maintainer of comp.mail.mh FAQ and MH-E. Vote Libertarian!
If you're passed on the right, you're in the wrong lane.
Reply to: