|
Hi guys,
I am using Debian woody 3.0 and I experience problem in
recompiling. I try to recompile my kernel with the old configuration from
Debian. The configuration can be found under the directory "/boot".
I follow the step used by "Linux Kernel HOWTO" but I fail to use my network
cards with my new kernel image. Can anybody tell me what's going wrong
with me!?
They are the commands I have used.
***************
make clean
make mrproper
cp /boot/config(old config by Debian Installation)
/usr/src/linux/.config
make dep
make modules
make modules_install
make bzImage
cp /usr/src/linux/arch/i386/boot/bzImage
/boot/bzImage(new)
(edit /etc/lilo.conf for the new kernel)
(reboot my comp.)
*************
Below are the messages I've copied down from the display
during booting.....unfortunately they are not found from the /var/log
folder....sigh
(...) are messages that looks fine to me
**************
(...)
cleaning: /etc/network/ifstate.
Setting up IP spoofing protection: rp_filter. Configuring network interfaces: SIOCSIFADDR: No such device eth0: ERROR while getting interface flags: No such device SIOCSIFNETMASK: No such device SIOCSIFBRDADDR: No such device eth0: ERROR while getting interface flags: No such device eth0: ERROR while getting interface flags: No such device modprobe: modprobe: Can't locate module eth1
SIOCSIFADDR: No such device modprobe: modprobe: Can't locate module eth1 eth1: ERROR while getting interface flags: No such device modprobe: modprobe: Can't locate module eth1 SIOCSIFNETMASK: No such device modprobe: modprobe: Can't locate module eth1 SIOCSIFBRDADDR: No such device modprobe: modprobe: Can't locate module eth1 eth1: ERROR while getting interface flags: No such device modprobe: modprobe: Can't locate module eth1 eth1: ERROR while getting interface flags: No such device modprobe: modprobe: Can't locate module eth1 done. Starting portmap daemon: portmap. (...) (...) Starting domain name service: namedhda: dma_intr: status=0x51 {DriveReady SeekCompete Error } hda: dma_intr: error=0x84 { DriveStatusError BadCRC } . Starting domain name service: lwresd. Starting NFS common utilities: statd. Starting internet superserver: inetd. (...) (...) Starting innd. hda: dma_intr: status=0x51 {DriveReady SeekComplete Error } hda: dma_intr: error=0x84 { DriveStatusError BadCRC } hda: dma_intr: status=0x51 {DriveReady SeekComplete Error } hda: dma_intr: error=0x84 { DriveStatusError BadCRC } hda: dma_intr: status=0x51 {DriveReady SeekComplete Error } hda: dma_intr: error=0x84 { DriveStatusError BadCRC } hda: dma_intr: status=0x51 {DriveReady SeekComplete Error } hda: dma_intr: error=0x84 { DriveStatusError BadCRC } ide0: reset: success (...) (...) **********
Thank you!!!
Jones
|