Re: Promise PDC20265 lockups...Please help
"BA" == Bradley Alexander <storm@tux.org> writes:
[...]
BA> In any case, it is 1GHz Athlon-C running Debian/sid. The motherboard is
BA> an Asus A7V133 with 768MB of RAM. It has a VIA Southbridge controlling
BA> hda-hdd, and a Promise PDC20265 controlling drives hde-hdh. I have 30GB
BA> drives on hda (Maxtor), hdc (Maxtor) and hde (Quantum), plus DVD drive
BA> on hdb and a cd-rw on hdd.
[...]
BA> Can anyone help me out on getting this drive running?
I'm running the same MB with CD-RW on hda, WDC on hde (root), Maxtors
on hdf and hdg, and a Duron @ 750 without any problems.
Some excerpts from my configuration are included below.
/Svante
Parts of .config for 2.4.18 kernel:
CONFIG_BLK_DEV_IDE=y
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDESCSI=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_ADMA=y
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_BLK_DEV_PDC202XX=y
CONFIG_PDC202XX_BURST=y
CONFIG_PDC202XX_FORCE=y
# lspci -v
[...]
00:11.0 Unknown mass storage controller: Promise Technology, Inc. 20265 (rev 02)
Subsystem: Promise Technology, Inc. Ultra100
Flags: bus master, medium devsel, latency 32, IRQ 10
I/O ports at 9800 [size=8]
I/O ports at 9400 [size=4]
I/O ports at 9000 [size=8]
I/O ports at 8800 [size=4]
I/O ports at 8400 [size=64]
Memory at d5800000 (32-bit, non-prefetchable) [size=128K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [58] Power Management version 1
[...]
# dmesg
Linux version 2.4.18 (root@peng) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 Sun Dec 8 17:15:47 CET 2002
[...]
Detected 756.751 MHz processor.
[...]
CPU: AMD Duron(tm) Processor stepping 01
[...]
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 21
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci00:04.1
ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio
PDC20265: IDE controller on PCI bus 00 dev 88
PCI: Found IRQ 10 for device 00:11.0
PDC20265: chipset revision 2
PDC20265: not 100% native mode: will probe irqs later
PDC20265: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode.
ide2: BM-DMA at 0x8400-0x8407, BIOS settings: hde:DMA, hdf:pio
ide3: BM-DMA at 0x8408-0x840f, BIOS settings: hdg:DMA, hdh:DMA
hda: PLEXTOR CD-R PX-W1210A, ATAPI CD/DVD-ROM drive
hde: WDC WD1000BB-32CCB0, ATA DISK drive
hdg: Maxtor 4G120J6, ATA DISK drive
hdh: Maxtor 4G120J6, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide2 at 0x9800-0x9807,0x9402 on irq 10
ide3 at 0x9000-0x9007,0x8802 on irq 10
hde: 195371568 sectors (100030 MB) w/2048KiB Cache, CHS=193821/16/63, UDMA(100)
hdg: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=238216/16/63, UDMA(100)
hdh: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=232581/16/63, UDMA(100)
[...]
--
Svante Eriksson, Ekedalsgatan 9A-20, SE-414 66 Göteborg, SWEDEN
Cell: +46-733-818987, Home: +46-31-249187, Work: +46-31-7354389
GPG: 1FCBC77A 4CF5 6F43 2A69 CAB2 8C03 1C54 A26C 9B3F 1FCB C77A
Reply to: