Installing ALSA?
Hi debianers,
I have a big problem in installing and configuring ALSA modules. At boot time I got
the folowing message
Starting ALSA sound driver (version none):modprobe: Can't locate module snd failed.
I got the same msg when I try a /etcinit.d/alsa start
So I tried to compile alsa source with make-kpkg [options]
modules_image, wgere the options where the same as for bulding the
custom kernel image. Compilation of alsa module fails, after giving a
bunch of errors messages (see below). What do I do wrong?
10Q for your help
--
Leo TheHobbit
IRCnet #roma2
ICQ 56656060
-----BEGIN GEEK CODE BLOCK-----
Version: 3.1
GED/CS d? s-:+>-: a C+++ U+++ L++(+++)>++++ P+++>+++++ E+(++)
W++ N+ K? o? !w O? M V--- PS+++ PE-- Y+ GPG+ t++ 5? X- R+ tv+
b++++ D? DI? G e(++++)* h(+) r--(---) y(+)-->+++*
------END GEEK CODE BLOCK------
=============================================================================
output of make-kpkg --append-to-version .20011210d --added-modules alsa-driver-0.5-0.5.10b-9 --config xconfig modules_image
Warning: The file include/linux/version.h exists
If you did not run make-kpkg clean after configuring
the kernel with make (menu|x)?config, the chances
are that it does not contain the appended version:
".20011210d"
If that is the case (or if you are not sure), I
strongly recommend that you abort now. By default,
though, I assume you know what you are doing, and I
apologize for being so annoying. Should I abort[Ny]?
test -f stamp-debian || make -f /usr/share/kernel-package/rules debian
test -f .config || make -f /usr/share/kernel-package/rules .config
test ! -f stamp-configure \
&& make EXTRAVERSION=.20011210d \
ARCH=i386 xconfig \
&& make EXTRAVERSION=.20011210d \
\
ARCH=i386 dep \
&& make EXTRAVERSION=.20011210d \
ARCH=i386 clean && \
touch stamp-configure
make: [stamp-configure] Error 1 (ignored)
for module in /usr/src/modules/alsa-driver-0.5-0.5.10b-9 ; do \
if test -d $module; then \
(cd $module; \
if ./debian/rules KVERS="2.2.20.20011210d" KSRC="/usr/src/linux" \
KMAINT="Unknown Kernel Package Maintainer" KEMAIL="unknown@unconfigured.in.etc.kernel-pkg.conf" \
KDREV="1.00.Custom" kdist_image; then \
echo "Module $module processed fine"; \
else \
echo "Module $module failed."; \
echo "Hit return to Continue"; \
read ans; \
fi; \
); \
fi; \
done
make[1]: Entering directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9'
make -w -f debian/rules MODDIR=/usr/src/linux/.. binary-modules
make[2]: Entering directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9'
for f in debian/debconf/Makefile.in debian/debconf/alsa-source_VERSION_.conf.in debian/debconf/alsa-source_VERSION_.config.in debian/debconf/config_VERSION_.templ.in debian/debconf/templates_VERSION_.templ.in debian/alsa-headers_VERSION_.files.in debian/alsa-modules_VERSION_-_KVERSION_.config.in debian/alsa-modules_VERSION_-_KVERSION_.dirs.in debian/alsa-modules_VERSION_-_KVERSION_.postinst.in debian/alsa-modules_VERSION_-_KVERSION_.postrm.in debian/alsa-modules_VERSION_-_KVERSION_.prerm.in debian/alsa-modules_VERSION_-_KVERSION_.templates.de.in debian/alsa-modules_VERSION_-_KVERSION_.templates.es.in debian/alsa-modules_VERSION_-_KVERSION_.templates.in debian/alsa-modules_VERSION_-_KVERSION_.templates.sv.in debian/alsa-source_VERSION_.README.debian.in debian/alsa-source_VERSION_.conffiles.in debian/alsa-source_VERSION_.config.in debian/alsa-source_VERSION_.postinst.in debian/modules.d/control-0.5.module-image.in debian/modules.d/control-0.5.module.in debian/modules.d/control.module-image.in debian/modules.d/control.module.in; \
do \
fi=`echo $f | sed -e 's/_VERSION_/-0.5/g' \
-e 's/_KVERSION_/2.2.20.20011210d/g'`; \
file=`dirname $fi`/`basename $fi .in`; \
echo -n "Generating $file..."; \
sed -e 's/_VERSION_/-0.5/g' \
-e 's/_MAJORVERSION_/0.5/g' \
-e 's/_PRIORITY_//g' \
-e 's/_KERNELVERSION_/2.2.20.20011210d/g' \
$f > $file; \
echo $file >> stamp-debian; \
echo "done"; \
done
Generating debian/debconf/Makefile...done
Generating debian/debconf/alsa-source-0.5.conf...done
Generating debian/debconf/alsa-source-0.5.config...done
Generating debian/debconf/config-0.5.templ...done
Generating debian/debconf/templates-0.5.templ...done
Generating debian/alsa-headers-0.5.files...done
Generating debian/alsa-modules-0.5-2.2.20.20011210d.config...done
Generating debian/alsa-modules-0.5-2.2.20.20011210d.dirs...done
Generating debian/alsa-modules-0.5-2.2.20.20011210d.postinst...done
Generating debian/alsa-modules-0.5-2.2.20.20011210d.postrm...done
Generating debian/alsa-modules-0.5-2.2.20.20011210d.prerm...done
Generating debian/alsa-modules-0.5-2.2.20.20011210d.templates.de...done
Generating debian/alsa-modules-0.5-2.2.20.20011210d.templates.es...done
Generating debian/alsa-modules-0.5-2.2.20.20011210d.templates...done
Generating debian/alsa-modules-0.5-2.2.20.20011210d.templates.sv...done
Generating debian/alsa-source-0.5.README.debian...done
Generating debian/alsa-source-0.5.conffiles...done
Generating debian/alsa-source-0.5.config...done
Generating debian/alsa-source-0.5.postinst...done
Generating debian/modules.d/control-0.5.module-image...done
Generating debian/modules.d/control-0.5.module...done
Generating debian/modules.d/control.module-image...done
Generating debian/modules.d/control.module...done
install debian/modules.d/control-0.5.source debian/control
cat debian/modules.d/control-0.5.normal >> debian/control
cat debian/modules.d/control-0.5.source > debian/control
cat debian/modules.d/control-0.5.module-image >> debian/control
sh debian/modules-tools.d/check-debian-rules-pkg
./configure --with-processor=i586 --prefix=/usr --with-kernel=/usr/src/linux --with-moddir=/lib/modules/2.2.20.20011210d/alsa --with-sequencer=yes --with-isapnp=yes --with-cards='dummy, fm801'
creating cache ./config.cache
checking for gcc... gcc
checking whether the C compiler (gcc ) works... yes
checking whether the C compiler (gcc ) is a cross-compiler... no
checking whether we are using GNU C... yes
checking whether gcc accepts -g... yes
checking for ranlib... ranlib
checking for a BSD compatible install... /usr/bin/install -c
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for linux/fs.h... yes
checking for working const... yes
checking for inline... inline
checking whether time.h and sys/time.h may both be included... yes
checking whether gcc needs -traditional... no
checking for directory with kernel source... /usr/src/linux
checking for kernel version... 2.2.20.20011210d
checking for kernel module symbol versions... yes
checking for PCI support in kernel... yes
checking for SGI/MIPS (HAL2) architecture... no
checking for directory to store kernel modules... /lib/modules/2.2.20.20011210d/alsa
checking for debug level... none
checking for processor type... i586tsc
checking for SMP... no
checking for ISA PnP driver in kernel... no
checking for ISA PnP support... yes
checking for driver version... 0.5.10b
checking for sequencer support... yes
checking for OSS/Free emulation... yes
checking for which soundcards to compile driver for... dummy fm801
updating cache ./config.cache
creating ./config.status
creating Makefile.conf
creating snddevices
creating utils/alsa-driver.spec
creating cards.config
creating include/config.h
creating include/config1.h
creating include/version.h
include/version.h is unchanged
echo 0.5.10b > config
make
make[3]: Entering directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9'
make dep
make[4]: Entering directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9'
ln -sf ../support/isapnp.h include/isapnp.h
make[5]: Entering directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/support'
rm -f ../include/modules/isapnp.ver
gcc -DALSA_BUILD -D__KERNEL__ -I/usr/src/linux/include -I.. -E -D__GENKSYMS__ isapnp.c | /sbin/genksyms -k 2.2.20 > ../include/modules/isapnp.ver
updating ../include/sndversions.h
gcc -E -M -D__DEPEND__ -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I.. *.c > .depend
make[5]: Leaving directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/support'
make[5]: Entering directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/kernel'
rm -f ../include/modules/sound.ver
gcc -DALSA_BUILD -D__KERNEL__ -I/usr/src/linux/include -I.. -E -D__GENKSYMS__ sound.c | /sbin/genksyms -k 2.2.20 > ../include/modules/sound.ver
rm -f ../include/modules/mixer.ver
gcc -DALSA_BUILD -D__KERNEL__ -I/usr/src/linux/include -I.. -E -D__GENKSYMS__ mixer.c | /sbin/genksyms -k 2.2.20 > ../include/modules/mixer.ver
rm -f ../include/modules/pcm.ver
gcc -DALSA_BUILD -D__KERNEL__ -I/usr/src/linux/include -I.. -E -D__GENKSYMS__ pcm.c | /sbin/genksyms -k 2.2.20 > ../include/modules/pcm.ver
rm -f ../include/modules/pcm_lib.ver
gcc -DALSA_BUILD -D__KERNEL__ -I/usr/src/linux/include -I.. -E -D__GENKSYMS__ pcm_lib.c | /sbin/genksyms -k 2.2.20 > ../include/modules/pcm_lib.ver
rm -f ../include/modules/rawmidi.ver
gcc -DALSA_BUILD -D__KERNEL__ -I/usr/src/linux/include -I.. -E -D__GENKSYMS__ rawmidi.c | /sbin/genksyms -k 2.2.20 > ../include/modules/rawmidi.ver
rm -f ../include/modules/timer.ver
gcc -DALSA_BUILD -D__KERNEL__ -I/usr/src/linux/include -I.. -E -D__GENKSYMS__ timer.c | /sbin/genksyms -k 2.2.20 > ../include/modules/timer.ver
rm -f ../include/modules/hwdep.ver
gcc -DALSA_BUILD -D__KERNEL__ -I/usr/src/linux/include -I.. -E -D__GENKSYMS__ hwdep.c | /sbin/genksyms -k 2.2.20 > ../include/modules/hwdep.ver
rm -f ../include/modules/mixer_oss.ver
gcc -DALSA_BUILD -D__KERNEL__ -I/usr/src/linux/include -I.. -E -D__GENKSYMS__ mixer_oss.c | /sbin/genksyms -k 2.2.20 > ../include/modules/mixer_oss.ver
updating ../include/sndversions.h
gcc -E -M -D__DEPEND__ -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I.. *.c > .depend
make[6]: Entering directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/kernel/seq'
rm -f ../../include/modules/seq.ver
gcc -DALSA_BUILD -D__KERNEL__ -I/usr/src/linux/include -I../.. -E -D__GENKSYMS__ seq.c | /sbin/genksyms -k 2.2.20 > ../../include/modules/seq.ver
rm -f ../../include/modules/seq_device.ver
gcc -DALSA_BUILD -D__KERNEL__ -I/usr/src/linux/include -I../.. -E -D__GENKSYMS__ seq_device.c | /sbin/genksyms -k 2.2.20 > ../../include/modules/seq_device.ver
rm -f ../../include/modules/seq_midi_event.ver
gcc -DALSA_BUILD -D__KERNEL__ -I/usr/src/linux/include -I../.. -E -D__GENKSYMS__ seq_midi_event.c | /sbin/genksyms -k 2.2.20 > ../../include/modules/seq_midi_event.ver
rm -f ../../include/modules/seq_midi.ver
gcc -DALSA_BUILD -D__KERNEL__ -I/usr/src/linux/include -I../.. -E -D__GENKSYMS__ seq_midi.c | /sbin/genksyms -k 2.2.20 > ../../include/modules/seq_midi.ver
updating ../../include/sndversions.h
gcc -E -M -D__DEPEND__ -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I../.. *.c > .depend
make[7]: Entering directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/kernel/seq/instr'
gcc -E -M -D__DEPEND__ -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I../../.. *.c > .depend
make[7]: Leaving directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/kernel/seq/instr'
make[7]: Entering directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/kernel/seq/oss'
rm -f ../../../include/modules/seq_oss.ver
gcc -DALSA_BUILD -D__KERNEL__ -I/usr/src/linux/include -I../../.. -E -D__GENKSYMS__ seq_oss.c | /sbin/genksyms -k 2.2.20 > ../../../include/modules/seq_oss.ver
updating ../../../include/sndversions.h
gcc -E -M -D__DEPEND__ -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I../../.. *.c > .depend
make[7]: Leaving directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/kernel/seq/oss'
make[6]: Leaving directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/kernel/seq'
make[6]: Entering directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/kernel/plugin'
rm -f ../../include/modules/plugin.ver
gcc -DALSA_BUILD -D__KERNEL__ -I/usr/src/linux/include -I../.. -E -D__GENKSYMS__ plugin.c | /sbin/genksyms -k 2.2.20 > ../../include/modules/plugin.ver
updating ../../include/sndversions.h
gcc -E -M -D__DEPEND__ -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I../.. *.c > .depend
make[6]: Leaving directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/kernel/plugin'
make[5]: Leaving directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/kernel'
make[5]: Entering directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/lowlevel'
make[6]: Entering directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/lowlevel/generic'
rm -f ../../include/modules/mpu401_uart.ver
gcc -DALSA_BUILD -D__KERNEL__ -I/usr/src/linux/include -I../.. -E -D__GENKSYMS__ mpu401_uart.c | /sbin/genksyms -k 2.2.20 > ../../include/modules/mpu401_uart.ver
rm -f ../../include/modules/opl3.ver
gcc -DALSA_BUILD -D__KERNEL__ -I/usr/src/linux/include -I../.. -E -D__GENKSYMS__ opl3.c | /sbin/genksyms -k 2.2.20 > ../../include/modules/opl3.ver
rm -f ../../include/modules/ac97_codec.ver
gcc -DALSA_BUILD -D__KERNEL__ -I/usr/src/linux/include -I../.. -E -D__GENKSYMS__ ac97_codec.c | /sbin/genksyms -k 2.2.20 > ../../include/modules/ac97_codec.ver
updating ../../include/sndversions.h
gcc -E -M -D__DEPEND__ -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I../.. *.c > .depend
make[6]: Leaving directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/lowlevel/generic'
make[6]: Entering directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/lowlevel/isa'
gcc -E -M -D__DEPEND__ -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I../.. *.c > .depend
make[6]: Leaving directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/lowlevel/isa'
make[6]: Entering directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/lowlevel/i2c'
gcc -E -M -D__DEPEND__ -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I../.. *.c > .depend
make[6]: Leaving directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/lowlevel/i2c'
make[6]: Entering directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/lowlevel/pci'
rm -f ../../include/modules/fm801.ver
gcc -DALSA_BUILD -D__KERNEL__ -I/usr/src/linux/include -I../.. -E -D__GENKSYMS__ fm801.c | /sbin/genksyms -k 2.2.20 > ../../include/modules/fm801.ver
updating ../../include/sndversions.h
gcc -E -M -D__DEPEND__ -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I../.. *.c > .depend
make[6]: Leaving directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/lowlevel/pci'
make[5]: Leaving directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/lowlevel'
make[5]: Entering directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/cards'
gcc -E -M -D__DEPEND__ -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I.. *.c > .depend
make[5]: Leaving directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/cards'
make[4]: Leaving directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9'
make[4]: Entering directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/support'
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I.. -DEXPORT_SYMTAB -c isapnp.c
{standard input}: Assembler messages:
{standard input}:9: Warning: ignoring changed section attributes for .modinfo
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I.. -c -o isapnp_proc.o isapnp_proc.c
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I.. -c -o isapnp_quirks.o isapnp_quirks.c
ld -r -o ../modules/isapnp.o isapnp.o isapnp_proc.o isapnp_quirks.o
make[4]: Leaving directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/support'
make[4]: Entering directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/kernel'
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I.. -DEXPORT_SYMTAB -c sound.c
{standard input}: Assembler messages:
{standard input}:9: Warning: ignoring changed section attributes for .modinfo
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I.. -c -o init.o init.c
init.c:30: warning: `snd_card_lock' defined but not used
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I.. -c -o isadma.o isadma.c
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I.. -c -o memory.o memory.c
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I.. -c -o vma.o vma.c
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I.. -c -o info.o info.c
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I.. -c -o switch.o switch.c
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I.. -c -o control.o control.c
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I.. -c -o device.o device.c
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I.. -c -o misc.o misc.c
misc.c:281: warning: `pm_devs_lock' defined but not used
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I.. -c -o sound_oss.o sound_oss.c
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I.. -c -o info_oss.o info_oss.c
ld -r -o ../modules/snd.o sound.o init.o isadma.o memory.o vma.o info.o switch.o control.o device.o misc.o sound_oss.o info_oss.o
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I.. -DEXPORT_SYMTAB -c mixer.c
{standard input}: Assembler messages:
{standard input}:9: Warning: ignoring changed section attributes for .modinfo
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I.. -c -o mixer_lib.o mixer_lib.c
ld -r -o ../modules/snd-mixer.o mixer.o mixer_lib.o
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I.. -DEXPORT_SYMTAB -c pcm.c
{standard input}: Assembler messages:
{standard input}:9: Warning: ignoring changed section attributes for .modinfo
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I.. -c -o pcm_native.o pcm_native.c
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I.. -DEXPORT_SYMTAB -c pcm_lib.c
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I.. -c -o pcm_misc.o pcm_misc.c
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I.. -c -o pcm_timer.o pcm_timer.c
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I.. -c -o pcm_proc.o pcm_proc.c
ld -r -o ../modules/snd-pcm.o pcm.o pcm_native.o pcm_lib.o pcm_misc.o pcm_timer.o pcm_proc.o
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I.. -c -o pcm_oss.o pcm_oss.c
{standard input}: Assembler messages:
{standard input}:9: Warning: ignoring changed section attributes for .modinfo
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I.. -c -o pcm_oss_plugin.o pcm_oss_plugin.c
ld -r -o ../modules/snd-pcm-oss.o pcm_oss.o pcm_oss_plugin.o
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I.. -DEXPORT_SYMTAB -c rawmidi.c
{standard input}: Assembler messages:
{standard input}:9: Warning: ignoring changed section attributes for .modinfo
ld -r -o ../modules/snd-rawmidi.o rawmidi.o
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I.. -DEXPORT_SYMTAB -c timer.c
{standard input}: Assembler messages:
{standard input}:9: Warning: ignoring changed section attributes for .modinfo
ld -r -o ../modules/snd-timer.o timer.o
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I.. -DEXPORT_SYMTAB -c hwdep.c
{standard input}: Assembler messages:
{standard input}:9: Warning: ignoring changed section attributes for .modinfo
ld -r -o ../modules/snd-hwdep.o hwdep.o
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I.. -DEXPORT_SYMTAB -c mixer_oss.c
{standard input}: Assembler messages:
{standard input}:9: Warning: ignoring changed section attributes for .modinfo
ld -r -o ../modules/snd-mixer-oss.o mixer_oss.o
make[5]: Entering directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/kernel/seq'
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I../.. -DEXPORT_SYMTAB -c seq.c
{standard input}: Assembler messages:
{standard input}:9: Warning: ignoring changed section attributes for .modinfo
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I../.. -c -o seq_lock.o seq_lock.c
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I../.. -c -o seq_clientmgr.o seq_clientmgr.c
seq_clientmgr.c:51: warning: `clients_lock' defined but not used
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I../.. -c -o seq_memory.o seq_memory.c
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I../.. -c -o seq_queue.o seq_queue.c
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I../.. -c -o seq_fifo.o seq_fifo.c
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I../.. -c -o seq_prioq.o seq_prioq.c
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I../.. -c -o seq_timer.o seq_timer.c
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I../.. -c -o seq_system.o seq_system.c
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I../.. -c -o seq_ports.o seq_ports.c
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I../.. -c -o seq_info.o seq_info.c
ld -r -o ../../modules/snd-seq.o seq.o seq_lock.o seq_clientmgr.o seq_memory.o seq_queue.o seq_fifo.o seq_prioq.o seq_timer.o seq_system.o seq_ports.o seq_info.o
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I../.. -DEXPORT_SYMTAB -c seq_device.c
{standard input}: Assembler messages:
{standard input}:9: Warning: ignoring changed section attributes for .modinfo
ld -r -o ../../modules/snd-seq-device.o seq_device.o
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I../.. -c -o seq_dummy.o seq_dummy.c
{standard input}: Assembler messages:
{standard input}:9: Warning: ignoring changed section attributes for .modinfo
ld -r -o ../../modules/snd-seq-dummy.o seq_dummy.o
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I../.. -DEXPORT_SYMTAB -c seq_midi_event.c
{standard input}: Assembler messages:
{standard input}:9: Warning: ignoring changed section attributes for .modinfo
ld -r -o ../../modules/snd-seq-midi-event.o seq_midi_event.o
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I../.. -DEXPORT_SYMTAB -c seq_midi.c
{standard input}: Assembler messages:
{standard input}:9: Warning: ignoring changed section attributes for .modinfo
ld -r -o ../../modules/snd-seq-midi.o seq_midi.o
make[6]: Entering directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/kernel/seq/instr'
make[6]: Nothing to be done for `all'.
make[6]: Leaving directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/kernel/seq/instr'
make[6]: Entering directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/kernel/seq/oss'
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I../../.. -DEXPORT_SYMTAB -c seq_oss.c
{standard input}: Assembler messages:
{standard input}:9: Warning: ignoring changed section attributes for .modinfo
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I../../.. -c -o seq_oss_init.o seq_oss_init.c
{standard input}: Assembler messages:
{standard input}:9: Warning: ignoring changed section attributes for .modinfo
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I../../.. -c -o seq_oss_timer.o seq_oss_timer.c
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I../../.. -c -o seq_oss_ioctl.o seq_oss_ioctl.c
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I../../.. -c -o seq_oss_event.o seq_oss_event.c
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I../../.. -c -o seq_oss_rw.o seq_oss_rw.c
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I../../.. -c -o seq_oss_synth.o seq_oss_synth.c
seq_oss_synth.c:77: warning: `register_lock' defined but not used
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I../../.. -c -o seq_oss_midi.o seq_oss_midi.c
seq_oss_midi.c:58: warning: `register_lock' defined but not used
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I../../.. -c -o seq_oss_readq.o seq_oss_readq.c
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I../../.. -c -o seq_oss_writeq.o seq_oss_writeq.c
ld -r -o ../../../modules/snd-seq-oss.o seq_oss.o seq_oss_init.o seq_oss_timer.o seq_oss_ioctl.o seq_oss_event.o seq_oss_rw.o seq_oss_synth.o seq_oss_midi.o seq_oss_readq.o seq_oss_writeq.o
make[6]: Leaving directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/kernel/seq/oss'
make[5]: Leaving directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/kernel/seq'
make[5]: Entering directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/kernel/plugin'
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I../.. -DEXPORT_SYMTAB -c plugin.c
{standard input}: Assembler messages:
{standard input}:9: Warning: ignoring changed section attributes for .modinfo
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I../.. -c -o linear.o linear.c
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I../.. -c -o interleave.o interleave.c
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I../.. -c -o mulaw.o mulaw.c
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I../.. -c -o voices.o voices.c
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I../.. -c -o rate.o rate.c
ld -r -o ../../modules/snd-pcm-plugin.o plugin.o linear.o interleave.o mulaw.o voices.o rate.o
make[5]: Leaving directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/kernel/plugin'
make[4]: Leaving directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/kernel'
make[4]: Entering directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/lowlevel'
make[5]: Entering directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/lowlevel/generic'
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I../.. -DEXPORT_SYMTAB -c mpu401_uart.c
{standard input}: Assembler messages:
{standard input}:9: Warning: ignoring changed section attributes for .modinfo
ld -r -o ../../modules/snd-mpu401-uart.o mpu401_uart.o
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I../.. -DEXPORT_SYMTAB -c opl3.c
{standard input}: Assembler messages:
{standard input}:9: Warning: ignoring changed section attributes for .modinfo
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I../.. -c -o opl3_synth.o opl3_synth.c
ld -r -o ../../modules/snd-opl3.o opl3.o opl3_synth.o
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I../.. -DEXPORT_SYMTAB -c ac97_codec.c
{standard input}: Assembler messages:
{standard input}:9: Warning: ignoring changed section attributes for .modinfo
ld -r -o ../../modules/snd-ac97-codec.o ac97_codec.o
make[5]: Leaving directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/lowlevel/generic'
make[5]: Entering directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/lowlevel/isa'
make[5]: Nothing to be done for `all'.
make[5]: Leaving directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/lowlevel/isa'
make[5]: Entering directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/lowlevel/i2c'
make[5]: Nothing to be done for `all'.
make[5]: Leaving directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/lowlevel/i2c'
make[5]: Entering directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/lowlevel/pci'
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I../.. -DEXPORT_SYMTAB -c fm801.c
{standard input}: Assembler messages:
{standard input}:9: Warning: ignoring changed section attributes for .modinfo
ld -r -o ../../modules/snd-fm801.o fm801.o
make[5]: Leaving directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/lowlevel/pci'
make[4]: Leaving directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/lowlevel'
make[4]: Entering directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/cards'
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I.. -c -o card-dummy.o card-dummy.c
{standard input}: Assembler messages:
{standard input}:9: Warning: ignoring changed section attributes for .modinfo
ld -r -o ../modules/snd-card-dummy.o card-dummy.o
gcc -DALSA_BUILD -D__KERNEL__ -O2 -m486 -malign-loops=2 -malign-jumps=2 -malign-functions=2 -DCPU=586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -pipe -I/usr/src/linux/include -I.. -c -o card-fm801.o card-fm801.c
{standard input}: Assembler messages:
{standard input}:9: Warning: ignoring changed section attributes for .modinfo
ld -r -o ../modules/snd-card-fm801.o card-fm801.o
make[4]: Leaving directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/cards'
ALSA modules were sucessfully compiled.
make[3]: Leaving directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9'
touch compile
touch build
test -f debian/rules
test `id -u` = "0"
rm -rf debian/alsa-source-0.5 debian/tmp debian/substvars
install -d debian/alsa-source-0.5
install -d -o root -g root -m 755 debian/tmp/usr/include/linux
mkdir -p debian/tmp/lib/modules/2.2.20.20011210d/alsa
cp modules/*.o debian/tmp/lib/modules/2.2.20.20011210d/alsa
install -d -o root -g root -m 755 debian/tmp/usr/share/doc/
ln -sf alsa-base debian/tmp/usr/share/doc/alsa-modules-0.5-2.2.20.20011210d
rm -rf debian/tmp/usr/include
dh_testdir
dh_testroot
sh debian/modules-tools.d/setvers.sh
dh_installdirs
dh_installdebconf
dh_link
dh_strip
dh_compress
dh_fixperms
dh_installdeb
dh_shlibdeps
dh_gencontrol -- -v`cat debian/MODVERS`
dh_md5sums
dh_builddeb --destdir=/usr/src/linux/..
dpkg-deb: costruisco il pacchetto `alsa-modules-0.5-2.2.20.20011210d' in `/usr/src/linux/../alsa-modules-0.5-2.2.20.20011210d_0.5.10b-9+p0+1.00.Custom_i386.deb'.
make[2]: Leaving directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9'
make -w -f debian/rules MODDIR=/usr/src/linux/.. clean
make[2]: Entering directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9'
test -f debian/rules
test `id -u` = "0"
rm -f debian/substvars debian/*.debhelper debian/*.substvars
rm -rf debian/tmp
rm -rf debian/tmp
rm -rf debian/alsa-source-0.5
rm -rf debian/alsa-headers-0.5
rm -f debian/files
rm -f debian/snddevices
find . -type f -a \( -name \#\*\# -o -name \*\~ -o -name DEADJOE \
-o -name \*.orig -o -name \*.rej -o -name \*.bak -o -name \
.\*.orig -o -name .\*.rej -o -name .SUMS -o -name TAGS \
-o -name core -o \( -path \*/.deps/\* -a -name \*.P \) \) \
-exec rm -f {} \;
rm -f config build debian/VERSION debian/KVERS compile
rm -f include/isapnp.h
make mrproper
make[3]: Entering directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9'
rm -f `find . -name ".depend"`
make[4]: Entering directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/support'
rm -f .depend *.o *.orig *.old *~
rm -f core ../include/sndversions.h
make[4]: Leaving directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/support'
make[4]: Entering directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/kernel'
make[5]: Entering directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/kernel/seq'
make[6]: Entering directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/kernel/seq/instr'
rm -f .depend *.o *.orig snd.map snd.map? *.old *~
rm -f core ../../../include/sndversions.h
make[6]: Leaving directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/kernel/seq/instr'
make[6]: Entering directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/kernel/seq/oss'
rm -f .depend *.o *.orig snd.map snd.map? *.old *~
rm -f core ../../../include/sndversions.h
make[6]: Leaving directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/kernel/seq/oss'
rm -f .depend *.o *.orig snd.map snd.map? *.old *~
rm -f core ../../include/sndversions.h
make[5]: Leaving directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/kernel/seq'
make[5]: Entering directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/kernel/plugin'
rm -f .depend *.o *.orig snd.map snd.map? *.old *~
rm -f core ../../include/sndversions.h
make[5]: Leaving directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/kernel/plugin'
rm -f .depend *.o *.orig snd.map snd.map? *.old *~
rm -f core ../include/sndversions.h
make[4]: Leaving directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/kernel'
make[4]: Entering directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/lowlevel'
make[5]: Entering directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/lowlevel/generic'
rm -f .depend *.o *.orig *~
rm -f core ../../include/sndversions.h
make[5]: Leaving directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/lowlevel/generic'
make[5]: Entering directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/lowlevel/isa'
rm -f .depend *.o *.orig ultra.map ultra.map? *~
rm -f core ../../include/sndversions.h
make[5]: Leaving directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/lowlevel/isa'
make[5]: Entering directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/lowlevel/i2c'
rm -f .depend *.o *.orig ultra.map ultra.map? *~
rm -f core ../../include/sndversions.h
make[5]: Leaving directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/lowlevel/i2c'
make[5]: Entering directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/lowlevel/pci'
rm -f .depend *.o *.orig snd.map snd.map? *~
rm -f core ../../include/sndversions.h
make[5]: Leaving directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/lowlevel/pci'
rm -f core .depend *.o *.orig snd.map snd.map? *~
make[4]: Leaving directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/lowlevel'
make[4]: Entering directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/cards'
rm -f core .depend *.o *.orig snd.map snd.map? *~
make[4]: Leaving directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/cards'
make[4]: Entering directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/include'
rm -f core .depend *.o *.orig *~ modules/*.ver
make[4]: Leaving directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/include'
make[4]: Entering directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/test'
rm -f *.o csp_load pcm mmap_test osspcm osspcm1 *~
make[4]: Leaving directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/test'
make[4]: Entering directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/utils'
rm -f core .depend *.o *.orig *~
make[4]: Leaving directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/utils'
rm -f core .depend *.o snd.map* *~
rm -f `find . -name "out.txt"`
rm -f `find . -name "*.orig"`
rm -f ./include/modules/*.ver
rm -f modules/*.o
rm -f doc/*~
rm -f config.cache config.log config.status Makefile.conf
rm -f utils/alsa-driver.spec
make[3]: Leaving directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9'
cd debian/debconf && make clean
make[3]: Entering directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/debian/debconf'
rm -f alsa-source-0.5.config alsa-source-0.5.templates cards
make[3]: Leaving directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/debian/debconf'
rm -f debian/alsa-source-0.5.postinst
rm -f debian/alsa-source-0.5.config
rm -f debian/alsa-source-0.5.templates
rm -f debian/templates
rm -f `cat stamp-debian`
rm -f stamp-debian
dh_clean -k
make -f debian/sys-build.mk source.clean
make[3]: Entering directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9'
make[4]: Entering directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/debian/scripts'
make[4]: Leaving directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/debian/scripts'
make[4]: Entering directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/debian/scripts'
make[4]: Leaving directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9/debian/scripts'
make[3]: Leaving directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9'
rm -f debian/conffiles
make[2]: Leaving directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9'
make[1]: Leaving directory `/usr/src/modules/alsa-driver-0.5-0.5.10b-9'
Module /usr/src/modules/alsa-driver-0.5-0.5.10b-9 processed fine
Reply to: