|
Hai,
Still trying to get that thing working my
way......
Trying to be as complete as possible.
Proliant 1000
Pentium 60 :-)
128MB ram
5x4.3GB Fast wide scsi2 (?) on a smart array-2
compaq controller
1x1.05 Seagate .....scsi on the onboard
controller
1x CDrom on the onboard controller.
2x tokenring-cards (don't know how to use them
though)
1x ISA NE2000.
I have installed the SoftPaQs for Dos.
I can boot from both controllers into
dos.
But I can't get the CD-rom to
work.........
Here's my config.sys:
DEVICE=smartscsi.SYS
/D:MSCD000
device=fsw2aspi.sys device=fws2cd.sys device=fws2disk.sys And my autoexec.bat:
MSCDEX.EXE /D:MSCD000 /L:E
Please bear with me for I DOS not know
;-)
Somebody suggested to use the bootfloppies, the
compact-flavour, but that does not find either
scsi-controller/harddisk/cdrom.
Trying to do it the loadlin-way, got me to the
root.bin file, that I cannot get on a floppy. Thus blocking that
road.
I even went on compiling a kernel with everything
that smells scsi in it. bzImage reported an error on it being to
big.
But with just the smart array and all the ram stuff
in the kernel, it wouldn't see the controllers either.(on
bootflop).
Does anybody have some enlightning suggestions or
pointers so that I need not learn anything (although I did a lot
lately).
And again thank you for your patience.
Regards,
Frans Schreuder.
|