RE: Problem with Z32 in a Woody box
On 28-Nov-2000 curro wrote:
>
> Hi, I have been unable to configure my Linux box to print in a
> LexmarkZ32 printer connected to the serial port. I have installed in
Do you really mean "serial port"?
I seem to remember that the Z32 does not work under Linux. At least I
think that is what www.linuxprinting.org (or .com?) has in it's database.
> my 700MHz Inspiron 5000e laptop the Woody dist (It seems necessary to
> get
> X correctly configured) and everything else seems to work correctly (I
X should have nothing to do with it, since lpd/lpdng are deamons that do
not depend on X. Also ghostscript as the filter ("driver") does not need
X ASAIK.
> didn't try to compile neither sound support nor APM yet). My problem is
> that I am not able to "communicate" with the printer.
>
> Reading the Printing-HOWTO it seems necessary to disable PnP
> support for the parallel port from the BIOS setup, what I am not sure
> how
Is it the parallel port now?
> to do it. In any case I have tried the various setup configurations for
> the parallel port and none of the allowed me to "talk" to the printer.
> I
> got /dev/lp[0,1,2,21] but sending a file to these devices had any
> effect
Since you said you connected it to the serial port that is correct.
> on the printer (Normally lp1 and lp2 complained the device doesn't
> exist
> and lp0 does nothing and display no error message. I would appreciate
> greatly some help or hint on this. The output of the command: cat
> /proc/parport/0/* in my system is the following
>
> MODEL:Unknown device;
> MANUFACTURER:Unknown vendor;
> lp
> base: 0x378
> irq: none
> dma: none
> modes: SPP,ECP,ECPPS2
> none
Sorry, not to be of help.
Thorsten
--
\\|//
( o.o )
\(_)/
----------------oOOo-------------------------oOOo-------------------
E-Mail: Manegold@uni-trier.de
Date: 28-Nov-2000
Time: 22:14:59 CET
PGP Keys on public keyservers
KeyID: 0xBEACCF0D
--------------------------------------------------------------------
__/ / \ \__
(___| |___)
Reply to: