RE: SB AWE64 PnP installation on slink 2.2.12
Thanks for the help on this.
I've done modprobe -r on sound, soundlow, soundcore, and uart401
When I do modprobe -a sb I get the following error
/lib/modules/2.2.12/misc/sb.o: init_module: Device or resource busy
sound: Device or resource busy
Then I do lsmod and the sound, soundlow, soundcore and uart401 modules are
back in there.
Module Size Used by
uart401 5588 0
sound 54476 0 [uart401]
soundlow 208 0 [sound]
soundcore 2100 3 [sound]
I cant get the sb module installed.
Bill
-----Original Message-----
From: Hans
Sent: 08 August 2000 21:29
To: William Smith; Debian-User (E-mail)
Subject: Re: SB AWE64 PnP installation on slink 2.2.12
This is the ISA SB64AWE, I suppose, so did you do the isapnp setup routine
(pnpdump, editing /etc/isapnp.conf, running isapnp /etc/isapnp.conf)?
The two modules that should be loaded are sound and sb.
Use modprobe -a sound and modprobe -a sb io=0x0220, irq=5 dma=1 dma16=5
mpu_io=0x330 to insert those.
Good luck. Contact me if you still have problems.
Hans
Reply to: