Re: Unidentified subject!
Hi again,
I tried that and it still gives the same errors.......
anyway here is the log of my Dialup networking using the same ISP ........
03-02-2000 15:28:24.99 - Initializing modem.
03-02-2000 15:28:24.99 - Send: ATE0Q0V1<cr>
03-02-2000 15:28:24.99 - Recv: ATE0Q0V1<cr>
03-02-2000 15:28:25.12 - Recv: <cr><lf>OK<cr><lf>
03-02-2000 15:28:25.12 - Interpreted response: Ok
03-02-2000 15:28:25.12 - Send: AT&FE0V1&A3&B1&D2&S0&C1S0=0<cr>
03-02-2000 15:28:25.24 - Recv: <cr><lf>OK<cr><lf>
03-02-2000 15:28:25.24 - Interpreted response: Ok
03-02-2000 15:28:25.24 - Send: ATS7=60S19=0M0&M4&K1&H1&R2&I0B0X4<cr>
03-02-2000 15:28:25.37 - Recv: <cr><lf>OK<cr><lf>
03-02-2000 15:28:25.37 - Interpreted response: Ok
03-02-2000 15:28:25.38 - Dialing.
03-02-2000 15:28:25.38 - Send: ATDT#######<cr>
03-02-2000 15:28:45.25 - Recv: <cr><lf>CONNECT
31200/ARQ/V34/LAPM/V42BIS<cr><lf>
03-02-2000 15:28:45.25 - Interpreted response: Connect
03-02-2000 15:28:45.25 - Connection established at 31200bps.
03-02-2000 15:28:45.25 - Error-control on.
03-02-2000 15:28:45.25 - Data compression on.
03-02-2000 16:31:19.41 - Remote modem hung up.
03-02-2000 16:31:19.41 - Recv: <cr><lf>NO CARRIER<cr><lf>
03-02-2000 16:31:19.41 - Interpreted response: No Carrier
03-02-2000 16:31:19.42 - Hanging up the modem.
03-02-2000 16:31:19.42 - Send: ATH<cr>
03-02-2000 16:31:19.55 - Recv: <cr><lf>OK<cr><lf>
03-02-2000 16:31:19.55 - Interpreted response: Ok
03-02-2000 16:31:19.55 - 115200,N,8,1
Please respond to Wolfgang Rufeger <wolfgang@rufeger.de>
To: Faisal Mahdi/Saudi Arabia/IBM@IBMSA
cc:
Subject: Re: Unidentified subject!
> I have a PII PC which is running win 98 and Linux, I tried setting up
my
> ISP connection using "pppd" and "chat" but I
> didn't get very far, i thought the script i wrote was wrong......
> However when I used Kppp I failed also with a message in the
> /var/log/message:
> <Date&Time> pppd [<process number>] : CHAP authenticantion successful
> <Date&Time> pppd [<process number>] : remote host unable to determine IP
> address
> Then I lose the connection
Are You using dynamical assignd IP-adresses or static ones ? If You have a
static IP-Address, You have to specify it, when connecting to Your ISP.
Othetwise you have to use ipcp-accept-local and ipcp-accept-remote in Your
ppp-options file.
> and how can I change the Modem speed while connected? I know BREAK [ \K ]
> changes the speed .... but how do I know if it did and what is the new
> speed?
Why do You have to chnage the modem-speed while connected ? Do You have to
change the modem speed or the serial speed ? The last one can be set also
in
the options file (for example 115200).
Hope this will help You, otherwise send another mail with mire specific
information.
CU Wolfgang
/°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°
| e-mail: wolfgang@rufeger.de
| homepage: www.rufeger.de
| ICQ: 20269566
| PGP: http://www.wolf-wide-web.de/pgp.html
\............................................
Reply to: