Re: bootup message and ppp
Hi,
On Mon, 10 Apr 2000, Oswald Buddenhagen wrote:
> > The ppp dial-in is still unreliable. Usually the first attempt fails,
> > [...]
> > What might be the problem? Once the connection is settled, it seems to
> > be stable.
> >
> this might be related to the above problem, as the serial port, through
> which the modem is connected, cannot be set up properly.
I've changed that thing now and the S30.serial message does not show up
any more. But the ppp-dialling is still the same. The first dialing ends
up with a negociation problem and a hang-up. The second dialing works.
This ppp connection is as well different from the smooth working one of
RedHat in that it does not work, when I simply type telnet and the name
of the server I want to log in. I always have to type in the complete
name with domain. Under RedHat, the plain server name without domain
suffices. Both DNS-servers of the University are listed in /etc/resolv.conf
and in /etc/ppp/resolv.
Initialising the ISDN-TA does not seem to be the problem. I can
remember, I had a similar problem with RedHat in the very beginning. It
was gone, after I once configured the ppp with ppp-config (before, I was
fiddling around in editing the files by hand). I still don't know what
the problem was. But with Debian, I started right away with pppconfig
and have a similar negociation problem after establishing the line.
Heaps of this are in /var/log/debug:
Apr 11 01:26:49 alphons pppd[161]: sent [LCP ConfReq id=0x1 <asyncmap
0x0> <magi
c 0x224b6011> <pcomp> <accomp>]
Apr 11 01:26:49 alphons pppd[161]: rcvd [LCP ConfReq id=0xfe <auth pap>
<magic 0
x7a680798> < 11 04 05 f4> < 13 0a 01 72 61 2d 75 6e 69 31>]
Apr 11 01:26:49 alphons pppd[161]: sent [LCP ConfRej id=0xfe < 11 04 05
f4> < 13
0a 01 72 61 2d 75 6e 69 31>]
Apr 11 01:26:49 alphons pppd[161]: rcvd [LCP ConfAck id=0x1 <asyncmap
0x0> <magi
c 0x224b6011> <pcomp> <accomp>]
Apr 11 01:26:52 alphons pppd[161]: sent [LCP ConfReq id=0x1 <asyncmap
0x0> <magi
c 0x224b6011> <pcomp> <accomp>]
Apr 11 01:26:52 alphons pppd[161]: rcvd [LCP ConfAck id=0x1 <asyncmap
0x0> <magi
c 0x224b6011> <pcomp> <accomp>]
Apr 11 01:26:55 alphons pppd[161]: sent [LCP ConfReq id=0x1 <asyncmap
0x0> <magi
c 0x224b6011> <pcomp> <accomp>]
Apr 11 01:26:55 alphons pppd[161]: rcvd [LCP ConfAck id=0x1 <asyncmap
0x0> <magi
What does it mean?
Regards,
Kerstin
--
kerstin.hoef-emden@uni-koeln.de
Reply to: