PPP pap auth. insists on hostname
-----BEGIN PGP SIGNED MESSAGE-----
I'm in process of setting up a stock slink intel box and have run into
a problem with PPP PAP authentication when using the supplied pppd
version 2.3 patch level 5 and diald 0.16.5-3. Normally I'd expect
to use the loginId and password for my ISP in the pap-secrets file
along the line of: mylogin * mypassword. However, what's happening
is that no matter how the diald options and connect files and the
ppp options and pap-secrets files are tweaked, my machine insists on
either using the hostname for the pap user or rejects pap
authentication altogether. If the hostname is not given as the first
field in the pap-secrets file, pap authentication will be rejected.
(I do not authenticate the ISP, ppp/peer/provider contains "noauth".
E.g, for the hostname of catalina ( particulars tweaked to protect the guilty
):
If the pap-secrets file contains "catalina * amphibian" then the syslog
contains:
Jun 29 22:29:35 catalina pppd[1908]: sent [PAP AuthReq id=0x1 user="catalina"
password="amphibian"]
Jun 29 22:29:35 catalina pppd[1908]: rcvd [LCP EchoRep id=0x0 magic=0x0]
Jun 29 22:29:35 catalina pppd[1908]: rcvd [PAP AuthNak id=0x1 ""]
Jun 29 22:29:35 catalina pppd[1908]: Remote message:
Jun 29 22:29:35 catalina pppd[1908]: PAP authentication failed
And it should fail, "catalina" is not the correct user.
if pap-secrets contains "mylogin * amphibian", syslog will have:
Jun 29 22:30:57 catalina pppd[1937]: Connect: ppp0 <--> /dev/ttyS3
Jun 29 22:30:57 catalina pppd[1937]: sent [LCP ConfReq id=0x1 <magic
0x8cda8d1b> <pcomp> <accomp>]
Jun 29 22:30:58 catalina pppd[1937]: rcvd [LCP ConfReq id=0x1 < 00 04 00 00>
<mru 1524> <asyncmap 0xa0000> <auth chap 05> <pcomp> <accomp> < 11 04 05 f4> <
13 09 03 00 c0 7b 7a 97 22>]
Jun 29 22:30:58 catalina pppd[1937]: sent [LCP ConfRej id=0x1 < 00 04 00 00>
<auth chap 05> < 11 04 05 f4> < 13 09 03 00 c0 7b 7a 97 22>]
Jun 29 22:30:58 catalina pppd[1937]: rcvd [LCP ConfAck id=0x1 <magic
0x8cda8d1b> <pcomp> <accomp>]
Jun 29 22:30:58 catalina pppd[1937]: rcvd [LCP ConfReq id=0x2 <mru 1524>
<asyncmap 0xa0000> <auth pap> <pcomp> <accomp>]
Jun 29 22:30:58 catalina pppd[1937]: sent [LCP ConfRej id=0x2 <auth pap>]
Jun 29 22:30:58 catalina pppd[1937]: rcvd [LCP TermReq id=0x3]
Jun 29 22:30:58 catalina pppd[1937]: sent [LCP TermAck id=0x3]
Jun 29 22:31:00 catalina pppd[1937]: sent [LCP ConfReq id=0x1 <magic
0x8cda8d1b> <pcomp> <accomp>]
Jun 29 22:31:03 catalina diald[1923]: filter accepted rule 24 proto 17 len 57
packet 127.0.0.2,1367 => 216.212.2.2,53
Jun 29 22:31:03 catalina pppd[1937]: sent [LCP ConfReq id=0x1 <magic
0x8cda8d1b> <pcomp> <accomp>]
Jun 29 22:31:06 catalina pppd[1937]: Hangup (SIGHUP)
But this should succeed as "mylogin" and "amphibian" are the correct user and
password.
In a previous life, this had been a hamm box with PPP/PAP and diald
working as advertised to the same ph. no. of the same ISP. What am
I missing here??
Thanks and regards.
Lance
- ----------------------------------------------------------------------
Lance Heller email: lheller@unidial.com
- ----------------------------------------------------------------------
-----BEGIN PGP SIGNATURE-----
Version: 2.6.3i
Charset: noconv
iQCVAwUBN3mkCgPRE3CvtCyRAQH7ugP/TfyWnXXP9EICu7bzjP+x9sgnThmmIKPA
gpdRETucwH1dntfbq1cmH4QlR/dQzpOsPBr+IVbb80zbHzO2Ov54Mr8vxvW1+Whg
cY/YSwb3yO6q7KylZung9ofk87KWHEYH2xrM9lON5AHrs1GDD0l4+HLWyOvxNN+k
mLFvTxYgNxc=
=k4MN
-----END PGP SIGNATURE-----
Reply to: