Re: device /dev/dsp can`t be opened
Tabii bos kalmasini sagladim.Oyun aciliyor, ancak haritaya girdikten
sonra ses gidiyor, ustelik KDE seslerini tamamen devre disi
birakmisken...
On Fri, 25 Feb 2005 01:22:10 +0200, Emre Kadıoğlu
<kadiogluemre@gmail.com> wrote:
> Ilker Serhat Ozturk wrote:
>
> >Merhaba,
> >groups
> >komutunun ciktisinda audio var mi ? Yoksa
> >/etc/group
> >dosyasinda audio satirinda :kullaniciadi ekleyebilirsin.
> >Bir baska yolu da denemekte fayda var.
> >chmod 777 /dev/dsp
> >
> >Ben de de xmms calisiyor, KDE sesleri calisiyor, wine da bile ses var
> >ama Quake3 te yok :(
> >
> >
> >
> Quake3 te ses alabilmek için kde nin ses ayarlarında arts sunucusu belli
> bir süre boş kalırsa devre dışı bırak gibi bir seçenek var onu
> ayarlayabilirsiniz ya da arts sunucusunu kapatıp arts süreçlerini
> öldürüp quake3 ü çalıştırın ondan sonra ses alabilirsiniz. Bildiğim
> kadariyla quake3 arts ya da esd outputlarını desteklemiyor.
> Kolay gelsin...
>
> >On Thu, 24 Feb 2005 15:13:05 +0000, oguz cavli <ozcavli@hotmail.com> wrote:
> >
> >
> >>Iyi gunler,
> >>Oldukca ugrastim ama henuz sorunumu cozemedim, yardimlarinizi bekliyorum.
> >>Sorun: Error while initializing the sound driver:
> >>Sonuc: Ses alamiyorum, muzik dinleyemiyorum.
> >>Sistem: Compaq Armada 1750 Labtop, Pentium II, 64mbRAM, Debian Sarge, 2.6.8,
> >>fluxbox
> >>Cabalar: asagida :-))
> >>-------------------------------------------------------
> >>
> >>Bilgisayari her actigimda bu hata mesaji ile aciliyor:
> >>--------------------------------------------------------------------------------------------------
> >>- Informational- artsmessage (ust bar satiri) -
> >>- Sound server informational message: -
> >>- Error while initializing the sound driver:
> >> -
> >>- device /dev/dsp can`t be opened (no such file or directory) -
> >>- The sound server will continue, using the null output device. -
> >>--------------------------------------------------------------------------------------------------
> >>
> >>http://www.linuxquestions.org/questions/archive/5/2002/11/4/36425 adresinde
> >>bu /dev/dsp dosyasi yoksa:
> >># mknod /dev/dsp c 14 3
> >>If the device exists, try to check who is using it with:
> >># ps aux | grep `fuser /dev/dsp`
> >>ile yaratin kontrol edin diyordu. Verdim komutlari.
> >>ev:/# ls /dev/d*
> >>/dev/dmfm /dev/dsp
> >>Birsey degismedi.
> >>
> >>(0) Kurulumdan sonra makinadan ses gelmiyordu ve lspci ve lspci -v komutlari
> >>hic bir audio device a isaret etmiyordu. Ama ses kartim var ve win98 kurulu
> >>iken calisiyordu. Knoppix 3.7 kernel 2.6 ile actim ne acilista nede X`e
> >>ciktiktan sonra birsey degismedi. lspnp komutunu verince ess sound card gibi
> >>bir satir gordum. Not ettim.
> >>
> >>(1) Ardindan Debian`a gectim, kernel update yaptim ve 2.6.8 yukseldim lakin
> >>birsey degismedi.
> >>
> >>(2) Sonra alsaconfig komutunu verdim ve es modulunu sectim:
> >>ev:/home/janus# alsaconf
> >>Usage: /etc/init.d/alsa {start [CARD]|stop [CARD]|restart [CARD]|force-
> >>unload|force-reload|suspend|resume}
> >>Building card database..
> >>Probing legacy cards.. This may take a few minutes..
> >>Probing: es1688 : FOUND!!
> >>Running update-modules...
> >>Loading driver...
> >>Setting default volumes...
> >>=======================================
> >>Now ALSA is ready to use.
> >>For adjustment of volumes, use your favorite mixer.
> >>Have a lot of fun!
> >>
> >>(3) alsamixer`i calistirdim. evet artik bir ses cardim vardi: :-))
> >>ESS1688 rev 11
> >>Burada: Master, PCM, FM, Line, CD, PC Speak, Aux maksimumda
> >>Mic ise minimumda cok acarsam zaten otmeye basliyor, cizirdiyor. Mikrofon
> >>takip konusursamda hoporlorlerden ses geliyor, cubuklarlada sesi azaltip
> >>cogaltabiliyorum.
> >>AOUT`u ise artiramiyorum, kapali gibi, secilmiyor.
> >>Kmix`te artik yanit veriyor (vaktiyle uzerinde carpi vardi) hersey
> >>maksimumda mikrofon haric.
> >>
> >>(4) xmms`i calistirinca: (yeni bir hata cikti)
> >>----------------------------------------------------------------------------
> >>- Couldn`t open audio -
> >>- Please check that: -
> >>- Your soundcard is configured properly -
> >>- You have the correct output plugin selected -
> >>- No other program is blocking the soundcard -
> >>-----------------------------------------------------------------------------
> >>
> >>(5) Bu mesajdan sonra lsmod dedim, snd satirlarininda elvelden hic biri
> >>yoktu, bu iyiye isaret sanirim :--)
> >>ev:/home/janus# lsmod
> >>Module Size Used by
> >>snd_es1688 8136 0
> >>snd_opl3_lib 9728 1 snd_es1688
> >>snd_hwdep 9092 1 snd_opl3_lib
> >>snd_es1688_lib 14480 1 snd_es1688
> >>snd_mpu401_uart 7296 1 snd_es1688
> >>snd_rawmidi 23204 1 snd_mpu401_uart
> >>snd_seq_device 7944 2 snd_opl3_lib,snd_rawmidi
> >>snd_pcm_oss 48168 0
> >>snd_mixer_oss 16640 1 snd_pcm_oss
> >>snd_pcm 85384 2 snd_es1688_lib,snd_pcm_oss
> >>snd_page_alloc 11144 1 snd_pcm
> >>snd_timer 23172 2 snd_opl3_lib,snd_pcm
> >>snd 50660 11
> >>snd_es1688,snd_opl3_lib,snd_hwdep,snd_es1688_lib,snd_mpu401_uart,snd_rawmidi,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
> >>soundcore 9824 1 snd
> >>ipv6 229764 8
> >>serial_cs 9628 1
> >>xirc2ps_cs 17424 1
> >>ds 17796 6 serial_cs,xirc2ps_cs
> >>af_packet 20872 0
> >>tsdev 7168 0
> >>mousedev 9996 2
> >>psmouse 17800 0
> >>rtc 12088 0
> >>pcspkr 3816 0
> >>floppy 54992 0
> >>irtty_sir 8320 0
> >>sir_dev 18092 1 irtty_sir
> >>irda 167360 2 irtty_sir,sir_dev
> >>crc_ccitt 2432 1 irda
> >>parport_pc 33348 0
> >>parport 37320 1 parport_pc
> >>evdev 9088 0
> >>uhci_hcd 29328 0
> >>usbcore 104164 3 uhci_hcd
> >>yenta_socket 19200 1
> >>pcmcia_core 63028 4 serial_cs,xirc2ps_cs,ds,yenta_socket
> >>capability 4872 0
> >>commoncap 7168 1 capability
> >>ide_cd 38176 0
> >>cdrom 35740 1 ide_cd
> >>ext3 109672 1
> >>jbd 54552 1 ext3
> >>ide_generic 1664 0
> >>piix 12448 1
> >>ide_disk 16768 3
> >>ide_core 125028 4 ide_cd,ide_generic,piix,ide_disk
> >>sd_mod 20480 0
> >>ata_piix 7812 0
> >>libata 36228 1 ata_piix
> >>scsi_mod 115148 2 sd_mod,libata
> >>unix 26036 127
> >>font 8576 0
> >>vesafb 6688 0
> >>cfbcopyarea 3840 1 vesafb
> >>cfbimgblt 3200 1 vesafb
> >>cfbfillrect 3712 1 vesafb
> >>
> >>(6) cat /etc/modules.conf diyince su ciktiyi aliyordum: (alakali yerleri
> >>kesip aldim)
> >>### update-modules: start processing /etc/modutils/alsa-base
> >># snd module options
> >>options snd device_mode=0660
> >># autoloader aliases
> >>alias char-major-116 snd
> >>alias char-major-14 soundcore
> >>alias sound-service-0-0 snd-mixer-oss
> >>alias sound-service-0-1 snd-seq-oss
> >>alias sound-service-0-3 snd-pcm-oss
> >>alias sound-service-0-8 snd-seq-oss
> >>alias sound-service-0-12 snd-pcm-oss
> >>alias sound-slot-0 snd-card-0
> >>alias sound-slot-1 snd-card-1
> >>alias sound-slot-2 snd-card-2
> >>alias sound-slot-3 snd-card-3
> >>alias sound-slot-4 snd-card-4
> >>alias sound-slot-5 snd-card-5
> >>alias sound-slot-6 snd-card-6
> >>alias sound-slot-7 snd-card-7
> >>
> >>(7) Ardindan interneti kurcaladim ve ses kartim icin su degerleri girmem
> >>gerektigini ogrendim
> >>modules.conf dosyasina, options bolumune:
> >>options snd snd_major=116 snd_cards_limit=1 snd_device_mode=0660
> >>snd_device_gid=17 snd_device_uid=0
> >>options snd-card-es1688 snd_index=1 snd_id=CARD_1 snd_port=0x220
> >>snd_mpu_port=-1 snd_irq=5 snd_mpu_irq=7 snd_dma8=1
> >>Ama hic birsey degismedi ve ses alamiyorum.
> >>
> >>(8) xmms`de ctrl+p output`umu degistirebiliyorum:
> >>(http://www.webservertalk.com/message890881.html adresinde bu problemden
> >>bahsediyor)
> >>ALSA, aRts, Disk Writer, eSound, jack, jackasyn, OSS secenekleri var; Disk
> >>Writer Plugin 1.2.10 [libdisk_writer.so] secip play deyince caliyormus gibi,
> >>bar hareket ediyor visualazition bolumu alev alev ama tabi bir yere birsey
> >>yazdirmiyorum :-)) ALSA ve OSS ise bir output hatasi vermiyor ama hic
> >>birseyde olmuyor oyle duruyor. Baska programlarla ile play dedigim zaman ise
> >>bar hareket ediyor ama ses cikmiyor. aRts`yi sectigim zaman ise bazen bar
> >>hareker ediyor bazende konsola aRts sound server baslatilamadi tarzinda bir
> >>mesaj aliyorum.
> >>
> >>(9) Bir baska ilginc konu ise makinami tekrar baslatinca ses kartimi
> >>kaybetmem, ayrica etc/modules.conf dosyamda eski haline geliyor girdigim
> >>optionslar siliniyor. Bunu hic bir sekilde engelleyemedim. Her acilista
> >>yukarida gordugunuz herseyi tekrar yapiyorum, alsaconf, modules.conf, xmms.
> >>output ayarlari vs...
> >>
> >>(10) Asagiya acilis ve etc/modules.conf ciktilarini tamamen ekliyorum...
> >>
> >>(10.1) ev:/# dmesg
> >>Linux version 2.6.8-2-386 (dilinger@toaster.hq.voxel.net) (gcc version 3.3.5
> >>(Debian 1:3.3.5-6)) #1 Mon Jan 24 03:01:58 EST 2005
> >>BIOS-provided physical RAM map:
> >>BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> >>BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> >>BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> >>BIOS-e820: 0000000000100000 - 0000000003ff8000 (usable)
> >>BIOS-e820: 0000000003ff8000 - 0000000004000000 (ACPI NVS)
> >>63MB LOWMEM available.
> >>On node 0 totalpages: 16376
> >> DMA zone: 4096 pages, LIFO batch:1
> >> Normal zone: 12280 pages, LIFO batch:2
> >> HighMem zone: 0 pages, LIFO batch:1
> >>DMI not present.
> >>ACPI: RSDP (v000 COMPAQ ) @ 0x000fa010
> >>ACPI: RSDT (v001 COMPAQ RSDTBL 0x00000001 CPQ 0x00000001) @ 0x03ff8000
> >>ACPI: FADT (v001 COMPAQ CPQB05E 0x00000001 CPQ 0x00000001) @ 0x03ff8028
> >>ACPI: DSDT (v001 COMPAQ ARMADA17 0x00010000 MSFT 0x0100000a) @ 0x00000000
> >>ACPI: PM-Timer IO Port: 0xf08
> >>Built 1 zonelists
> >>Kernel command line: root=/dev/hda2 ro
> >>Local APIC disabled by BIOS -- reenabling.
> >>Could not enable APIC!
> >>Initializing CPU#0
> >>PID hash table entries: 256 (order 8: 2048 bytes)
> >>Detected 266.774 MHz processor.
> >>Using pmtmr for high-res timesource
> >>Console: colour VGA+ 80x25
> >>Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
> >>Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
> >>Memory: 57652k/65504k available (1335k kernel code, 7396k reserved, 733k
> >>data, 204k init, 0k highmem)
> >>Checking if this processor honours the WP bit even in supervisor mode... Ok.
> >>Calibrating delay loop... 526.33 BogoMIPS
> >>Security Scaffold v1.0.0 initialized
> >>Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
> >>CPU: After generic identify, caps: 0183f9ff 00000000 00000000 00000000
> >>CPU: After vendor identify, caps: 0183f9ff 00000000 00000000 00000000
> >>CPU: L1 I cache: 16K, L1 D cache: 16K
> >>CPU: L2 cache: 512K
> >>CPU: After all inits, caps: 0183f9ff 00000000 00000000 00000040
> >>CPU: Intel Pentium II (Deschutes) stepping 02
> >>Enabling fast FPU save and restore... done.
> >>Checking 'hlt' instruction... OK.
> >>Checking for popad bug... OK.
> >>checking if image is initramfs...it isn't (ungzip failed); looks like an
> >>initrd
> >>Freeing initrd memory: 4288k freed
> >>NET: Registered protocol family 16
> >>EISA bus registered
> >>PCI: PCI BIOS revision 2.10 entry at 0xf046a, last bus=0
> >>PCI: Using configuration type 1
> >>mtrr: v2.0 (20020519)
> >>ACPI: Subsystem revision 20040326
> >>ACPI: IRQ9 SCI: Edge set to Level Trigger.
> >> ACPI-0165: *** Error: No object was returned from [\_SB_.C0D6._STA]
> >>(Node c3fc6940), AE_NOT_EXIST
> >>ACPI: Interpreter enabled
> >>ACPI: Using PIC for interrupt routing
> >>ACPI: PCI Root Bridge [C000] (00:00)
> >>PCI: Probing PCI hardware (bus 00)
> >>ACPI: PCI Interrupt Routing Table [\_SB_.C000._PRT]
> >>ACPI: PCI Interrupt Link [C0F1] (IRQs *11)
> >>ACPI: PCI Interrupt Link [C0F5] (IRQs *11)
> >>ACPI: Power Resource [C102] (on)
> >>ACPI: Power Resource [C104] (on)
> >>Linux Plug and Play Support v0.97 (c) Adam Belay
> >>PnPBIOS: Scanning system for PnP BIOS support...
> >>PnPBIOS: Found PnP BIOS installation structure at 0xc00fb2a0
> >>PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x49df, dseg 0xf0000
> >>PnPBIOS: 18 nodes reported by PnP BIOS; 18 recorded by driver
> >>PCI: Using ACPI for IRQ routing
> >>ACPI: PCI Interrupt Link [C0F5] enabled at IRQ 11
> >>ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 11 (level, low) -> IRQ 11
> >>ACPI: PCI Interrupt Link [C0F1] enabled at IRQ 11
> >>ACPI: PCI interrupt 0000:00:11.0[A] -> GSI 11 (level, low) -> IRQ 11
> >>ACPI: PCI interrupt 0000:00:11.1[A] -> GSI 11 (level, low) -> IRQ 11
> >>VFS: Disk quotas dquot_6.5.1
> >>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> >>devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
> >>devfs: boot_options: 0x0
> >>Initializing Cryptographic API
> >>Limiting direct PCI/PCI transfers.
> >>isapnp: Scanning for PnP cards...
> >>isapnp: No Plug & Play device found
> >>Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
> >>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> >>RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
> >>serio: i8042 AUX port at 0x60,0x64 irq 12
> >>serio: i8042 KBD port at 0x60,0x64 irq 1
> >>input: AT Translated Set 2 keyboard on isa0060/serio0
> >>EISA: Probing bus 0 at eisa0
> >>Cannot allocate resource for EISA slot 1
> >>EISA: Detected 0 cards.
> >>NET: Registered protocol family 2
> >>IP: routing cache hash table of 512 buckets, 4Kbytes
> >>TCP: Hash tables configured (established 4096 bind 8192)
> >>NET: Registered protocol family 8
> >>NET: Registered protocol family 20
> >>ACPI: (supports S0 S3 S4 S4bios S5)
> >>RAMDISK: cramfs filesystem found at block 0
> >>RAMDISK: Loading 4288 blocks [1 disk] into ram disk... done.
> >>VFS: Mounted root (cramfs filesystem) readonly.
> >>Freeing unused kernel memory: 204k freed
> >>vesafb: probe of vesafb0 failed with error -6
> >>NET: Registered protocol family 1
> >>SCSI subsystem initialized
> >>libata version 1.02 loaded.
> >>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> >>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> >>PIIX4: IDE controller at PCI slot 0000:00:07.1
> >>PIIX4: chipset revision 1
> >>PIIX4: not 100% native mode: will probe irqs later
> >> ide0: BM-DMA at 0x1020-0x1027, BIOS settings: hda:DMA, hdb:DMA
> >>hda: IBM-DKLA-24320, ATA DISK drive
> >>hdb: TOSHIBA CD-ROM XM-1802B, ATAPI CD/DVD-ROM drive
> >>Using anticipatory io scheduler
> >>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> >>hda: max request size: 128KiB
> >>hda: 8415225 sectors (4308 MB) w/460KiB Cache, CHS=8905/15/63, UDMA(33)
> >>/dev/ide/host0/bus0/target0/lun0: p1 p2
> >>kjournald starting. Commit interval 5 seconds
> >>EXT3-fs: mounted filesystem with ordered data mode.
> >>Adding 393080k swap on /dev/hda1. Priority:-1 extents:1
> >>EXT3 FS on hda2, internal journal
> >>hdb: ATAPI 24X CD-ROM drive, 128kB Cache, DMA
> >>Uniform CD-ROM driver Revision: 3.20
> >>Capability LSM initialized
> >>Linux Kernel Card Services
> >> options: [pci] [cardbus] [pm]
> >>ACPI: PCI interrupt 0000:00:11.0[A] -> GSI 11 (level, low) -> IRQ 11
> >>Yenta: CardBus bridge found at 0000:00:11.0 [0e11:b047]
> >>Yenta: Using CSCINT to route CSC interrupts to PCI
> >>Yenta: Routing CardBus interrupts to PCI
> >>Yenta TI: socket 0000:00:11.0, mfunc 0x01001c72, devctl 0x64
> >>Yenta: ISA IRQ mask 0x00b8, PCI irq 11
> >>Socket status: 30000010
> >>ACPI: PCI interrupt 0000:00:11.1[A] -> GSI 11 (level, low) -> IRQ 11
> >>Yenta: CardBus bridge found at 0000:00:11.1 [0e11:b047]
> >>Yenta: Using CSCINT to route CSC interrupts to PCI
> >>Yenta: Routing CardBus interrupts to PCI
> >>Yenta TI: socket 0000:00:11.1, mfunc 0x01001c72, devctl 0x64
> >>Yenta: ISA IRQ mask 0x00b8, PCI irq 11
> >>Socket status: 30000006
> >>usbcore: registered new driver usbfs
> >>usbcore: registered new driver hub
> >>USB Universal Host Controller Interface driver v2.2
> >>ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 11 (level, low) -> IRQ 11
> >>uhci_hcd 0000:00:07.2: Intel Corp. 82371AB/EB/MB PIIX4 USB
> >>uhci_hcd 0000:00:07.2: irq 11, io base 00001000
> >>uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
> >>hub 1-0:1.0: USB hub found
> >>hub 1-0:1.0: 2 ports detected
> >>parport: PnPBIOS parport detected.
> >>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
> >>irda_init()
> >>NET: Registered protocol family 23
> >>inserting floppy driver for 2.6.8-2-386
> >>Floppy drive(s): fd0 is 1.44M
> >>FDC 0 is a post-1991 82077
> >>input: PC Speaker
> >>Real Time Clock Driver v1.12
> >>synaptics reset failed
> >>synaptics reset failed
> >>synaptics reset failed
> >>Unable to query Synaptics hardware.
> >>input: PS/2 Synaptics TouchPad on isa0060/serio1
> >>mice: PS/2 mouse device common for all mice
> >>ts: Compaq touchscreen protocol output
> >>NET: Registered protocol family 17
> >>cs: IO port probe 0x0100-0x04ff: excluding 0x220-0x22f 0x250-0x257
> >>0x310-0x317 0x4d0-0x4d7
> >>cs: IO port probe 0x0800-0x08ff: clean.
> >>cs: IO port probe 0x0c00-0x0cff: clean.
> >>cs: IO port probe 0x0a00-0x0aff: clean.
> >>cs: memory probe 0xa0000000-0xa0ffffff: clean.
> >>NET: Registered protocol family 10
> >>Disabled Privacy Extensions on device c02cc840(lo)
> >>IPv6 over IPv4 tunneling driver
> >>eth%d: autonegotiation failed; using 10mbs
> >>eth%d: MII selected
> >>eth%d: media 10BaseT, silicon revision 5
> >>eth0: Xircom: port 0x300, irq 3, hwaddr 00:10:A4:F5:66:E3
> >>ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A
> >>eth0: autonegotiation failed; using 10mbs
> >>eth0: MII selected
> >>eth0: media 10BaseT, silicon revision 5
> >>eth0: no IPv6 routers present
> >>psmouse.c: TouchPad at isa0060/serio1/input0 lost synchronization, throwing
> >>1 bytes away.
> >>
> >>(10.2) ev:/home/janus# cat /etc/modules.conf
> >>### This file is automatically generated by update-modules"
> >>#
> >># Please do not edit this file directly. If you want to change or add
> >># anything please take a look at the files in /etc/modutils and read
> >># the manpage for update-modules.
> >>#
> >>### update-modules: start processing /etc/modutils/0keep
> >># DO NOT MODIFY THIS FILE!
> >># This file is not marked as conffile to make sure if you upgrade modutils
> >># it will be restored in case some modifications have been made.
> >>#
> >># The keep command is necessary to prevent insmod and friends from ignoring
> >># the builtin defaults of a path-statement is encountered. Until all other
> >># packages use the new `add path'-statement this keep-statement is essential
> >># to keep your system working
> >>keep
> >>
> >>### update-modules: end processing /etc/modutils/0keep
> >>
> >>### update-modules: start processing /etc/modutils/actions
> >># Special actions that are needed for some modules
> >>
> >># The BTTV module does not load the tuner module automatically,
> >># so do that in here
> >>post-install bttv insmod tuner
> >>post-remove bttv rmmod tuner
> >>
> >>### update-modules: end processing /etc/modutils/actions
> >>
> >>### update-modules: start processing /etc/modutils/aliases
> >># Aliases to tell insmod/modprobe which modules to use
> >>
> >># Uncomment the network protocols you don't want loaded:
> >># alias net-pf-1 off # Unix
> >># alias net-pf-2 off # IPv4
> >># alias net-pf-3 off # Amateur Radio AX.25
> >># alias net-pf-4 off # IPX
> >># alias net-pf-5 off # DDP / appletalk
> >># alias net-pf-6 off # Amateur Radio NET/ROM
> >># alias net-pf-9 off # X.25
> >># alias net-pf-10 off # IPv6
> >># alias net-pf-11 off # ROSE / Amateur Radio X.25 PLP
> >># alias net-pf-19 off # Acorn Econet
> >>alias net-pf-24 pppoe
> >>
> >>alias char-major-10-175 agpgart
> >>alias char-major-10-200 tun
> >>alias char-major-81 bttv
> >>alias char-major-108 ppp_generic
> >>alias /dev/ppp ppp_generic
> >>alias tty-ldisc-3 ppp_async
> >>alias tty-ldisc-14 ppp_synctty
> >>alias ppp-compress-21 bsd_comp
> >>alias ppp-compress-24 ppp_deflate
> >>alias ppp-compress-26 ppp_deflate
> >>
> >># Crypto modules (see http://www.kerneli.org/)
> >>alias loop-xfer-gen-0 loop_gen
> >>alias loop-xfer-3 loop_fish2
> >>alias loop-xfer-gen-10 loop_gen
> >>alias cipher-2 des
> >>alias cipher-3 fish2
> >>alias cipher-4 blowfish
> >>alias cipher-6 idea
> >>alias cipher-7 serp6f
> >>alias cipher-8 mars6
> >>alias cipher-11 rc62
> >>alias cipher-15 dfc2
> >>alias cipher-16 rijndael
> >>alias cipher-17 rc5
> >>
> >>### update-modules: end processing /etc/modutils/aliases
> >>
> >>### update-modules: start processing /etc/modutils/alsa-base
> >># snd module options
> >>options snd snd_major=116 snd_cards_limit=1 snd_device_mode=0660
> >>snd_device_gid=17 snd_device_uid=0
> >>options snd-card-es1688 snd_index=1 snd_id=CARD_1 snd_port=0x220
> >>snd_mpu_port=-1 snd_irq=5 snd_mpu_irq=7 snd_dma8=1
> >># autoloader aliases
> >>alias char-major-116 snd
> >>alias char-major-14 soundcore
> >>alias sound-service-0-0 snd-mixer-oss
> >>alias sound-service-0-1 snd-seq-oss
> >>alias sound-service-0-3 snd-pcm-oss
> >>alias sound-service-0-8 snd-seq-oss
> >>alias sound-service-0-12 snd-pcm-oss
> >>alias sound-slot-0 snd-card-0
> >>alias sound-slot-1 snd-card-1
> >>alias sound-slot-2 snd-card-2
> >>alias sound-slot-3 snd-card-3
> >>alias sound-slot-4 snd-card-4
> >>alias sound-slot-5 snd-card-5
> >>alias sound-slot-6 snd-card-6
> >>alias sound-slot-7 snd-card-7
> >># Load optional modules above their base modules
> >>above snd-pcm snd-pcm-oss
> >>above snd-mixer snd-mixer-oss
> >>above snd-seq snd-seq-oss snd-seq-midi
> >># Cause a script to be run after snd-emu8000-synth module initialization
> >>post-install snd-emu8000-synth /lib/alsa/modprobe-post-install
> >>snd-emu8000-synth
> >># Cause a script to be run after card driver module initialization
> >>post-install snd-ad1816a /lib/alsa/modprobe-post-install snd-ad1816a
> >>post-install snd-ad1848 /lib/alsa/modprobe-post-install snd-ad1848
> >>post-install snd-ali5451 /lib/alsa/modprobe-post-install snd-ali5451
> >>post-install snd-als100 /lib/alsa/modprobe-post-install snd-als100
> >>post-install snd-als4000 /lib/alsa/modprobe-post-install snd-als4000
> >>post-install snd-asihpi /lib/alsa/modprobe-post-install snd-asihpi
> >>post-install snd-atiixp /lib/alsa/modprobe-post-install snd-atiixp
> >>post-install snd-au8810 /lib/alsa/modprobe-post-install snd-au8810
> >>post-install snd-au8820 /lib/alsa/modprobe-post-install snd-au8820
> >>post-install snd-au8830 /lib/alsa/modprobe-post-install snd-au8830
> >>post-install snd-azt2320 /lib/alsa/modprobe-post-install snd-azt2320
> >>post-install snd-azt3328 /lib/alsa/modprobe-post-install snd-azt3328
> >>post-install snd-azx /lib/alsa/modprobe-post-install snd-azx
> >>post-install snd-ca0106 /lib/alsa/modprobe-post-install snd-ca0106
> >>post-install snd-cmi8330 /lib/alsa/modprobe-post-install snd-cmi8330
> >>post-install snd-cmipci /lib/alsa/modprobe-post-install snd-cmipci
> >>post-install snd-cs4231 /lib/alsa/modprobe-post-install snd-cs4231
> >>post-install snd-cs4232 /lib/alsa/modprobe-post-install snd-cs4232
> >>post-install snd-cs4236 /lib/alsa/modprobe-post-install snd-cs4236
> >>post-install snd-cs4281 /lib/alsa/modprobe-post-install snd-cs4281
> >>post-install snd-cs46xx /lib/alsa/modprobe-post-install snd-cs46xx
> >>post-install snd-darla20 /lib/alsa/modprobe-post-install snd-darla20
> >>post-install snd-darla24 /lib/alsa/modprobe-post-install snd-darla24
> >>post-install snd-dt019x /lib/alsa/modprobe-post-install snd-dt019x
> >>post-install snd-emu10k1 /lib/alsa/modprobe-post-install snd-emu10k1
> >>post-install snd-emu10k1x /lib/alsa/modprobe-post-install snd-emu10k1x
> >>post-install snd-ens1370 /lib/alsa/modprobe-post-install snd-ens1370
> >>post-install snd-ens1371 /lib/alsa/modprobe-post-install snd-ens1371
> >>post-install snd-es1688 /lib/alsa/modprobe-post-install snd-es1688
> >>post-install snd-es18xx /lib/alsa/modprobe-post-install snd-es18xx
> >>post-install snd-es1938 /lib/alsa/modprobe-post-install snd-es1938
> >>post-install snd-es1968 /lib/alsa/modprobe-post-install snd-es1968
> >>post-install snd-es968 /lib/alsa/modprobe-post-install snd-es968
> >>post-install snd-fm801 /lib/alsa/modprobe-post-install snd-fm801
> >>post-install snd-gina20 /lib/alsa/modprobe-post-install snd-gina20
> >>post-install snd-gina24 /lib/alsa/modprobe-post-install snd-gina24
> >>post-install snd-gina3g /lib/alsa/modprobe-post-install snd-gina3g
> >>post-install snd-gusclassic /lib/alsa/modprobe-post-install snd-gusclassic
> >>post-install snd-gusextreme /lib/alsa/modprobe-post-install snd-gusextreme
> >>post-install snd-gusmax /lib/alsa/modprobe-post-install snd-gusmax
> >>post-install snd-harmony /lib/alsa/modprobe-post-install snd-harmony
> >>post-install snd-hdsp /lib/alsa/modprobe-post-install snd-hdsp
> >>post-install snd-hdspm /lib/alsa/modprobe-post-install snd-hdspm
> >>post-install snd-ice1712 /lib/alsa/modprobe-post-install snd-ice1712
> >>post-install snd-ice1724 /lib/alsa/modprobe-post-install snd-ice1724
> >>post-install snd-indigo /lib/alsa/modprobe-post-install snd-indigo
> >>post-install snd-indigodj /lib/alsa/modprobe-post-install snd-indigodj
> >>post-install snd-indigoio /lib/alsa/modprobe-post-install snd-indigoio
> >>post-install snd-intel8x0 /lib/alsa/modprobe-post-install snd-intel8x0
> >>post-install snd-interwave /lib/alsa/modprobe-post-install snd-interwave
> >>post-install snd-interwave-stb /lib/alsa/modprobe-post-install
> >>snd-interwave-stb
> >>post-install snd-korg1212 /lib/alsa/modprobe-post-install snd-korg1212
> >>post-install snd-layla20 /lib/alsa/modprobe-post-install snd-layla20
> >>post-install snd-layla24 /lib/alsa/modprobe-post-install snd-layla24
> >>post-install snd-layla3g /lib/alsa/modprobe-post-install snd-layla3g
> >>post-install snd-maestro3 /lib/alsa/modprobe-post-install snd-maestro3
> >>post-install snd-mia /lib/alsa/modprobe-post-install snd-mia
> >>post-install snd-mixart /lib/alsa/modprobe-post-install snd-mixart
> >>post-install snd-mona /lib/alsa/modprobe-post-install snd-mona
> >>post-install snd-mpu401 /lib/alsa/modprobe-post-install snd-mpu401
> >>post-install snd-msnd-pinnacle /lib/alsa/modprobe-post-install
> >>snd-msnd-pinnacle
> >>post-install snd-mtpav /lib/alsa/modprobe-post-install snd-mtpav
> >>post-install snd-nm256 /lib/alsa/modprobe-post-install snd-nm256
> >>post-install snd-opl3sa2 /lib/alsa/modprobe-post-install snd-opl3sa2
> >>post-install snd-opti92x-ad1848 /lib/alsa/modprobe-post-install
> >>snd-opti92x-ad1848
> >>post-install snd-opti92x-cs4231 /lib/alsa/modprobe-post-install
> >>snd-opti92x-cs4231
> >>post-install snd-opti93x /lib/alsa/modprobe-post-install snd-opti93x
> >>post-install snd-pc98-cs4232 /lib/alsa/modprobe-post-install snd-pc98-cs4232
> >>post-install snd-pcxhr /lib/alsa/modprobe-post-install snd-pcxhr
> >>post-install snd-pdaudiocf /lib/alsa/modprobe-post-install snd-pdaudiocf
> >>post-install snd-pdplus /lib/alsa/modprobe-post-install snd-pdplus
> >>post-install snd-portman2x4 /lib/alsa/modprobe-post-install snd-portman2x4
> >>post-install snd-powermac /lib/alsa/modprobe-post-install snd-powermac
> >>post-install snd-rme32 /lib/alsa/modprobe-post-install snd-rme32
> >>post-install snd-rme96 /lib/alsa/modprobe-post-install snd-rme96
> >>post-install snd-rme9652 /lib/alsa/modprobe-post-install snd-rme9652
> >>post-install snd-sa11xx-uda1341 /lib/alsa/modprobe-post-install
> >>snd-sa11xx-uda1341
> >>post-install snd-sb16 /lib/alsa/modprobe-post-install snd-sb16
> >>post-install snd-sb8 /lib/alsa/modprobe-post-install snd-sb8
> >>post-install snd-sbawe /lib/alsa/modprobe-post-install snd-sbawe
> >>post-install snd-serialmidi /lib/alsa/modprobe-post-install snd-serialmidi
> >>post-install snd-serial-u16550 /lib/alsa/modprobe-post-install
> >>snd-serial-u16550
> >>post-install snd-sgalaxy /lib/alsa/modprobe-post-install snd-sgalaxy
> >>post-install snd-sonicvibes /lib/alsa/modprobe-post-install snd-sonicvibes
> >>post-install snd-sscape /lib/alsa/modprobe-post-install snd-sscape
> >>post-install snd-sun-amd7930 /lib/alsa/modprobe-post-install snd-sun-amd7930
> >>post-install snd-sun-cs4231 /lib/alsa/modprobe-post-install snd-sun-cs4231
> >>post-install snd-sun-dbri /lib/alsa/modprobe-post-install snd-sun-dbri
> >>post-install snd-trident /lib/alsa/modprobe-post-install snd-trident
> >>post-install snd-usb-audio /lib/alsa/modprobe-post-install snd-usb-audio
> >>post-install snd-usb-usx2y /lib/alsa/modprobe-post-install snd-usb-usx2y
> >>post-install snd-via82xx /lib/alsa/modprobe-post-install snd-via82xx
> >>post-install snd-vx222 /lib/alsa/modprobe-post-install snd-vx222
> >>post-install snd-vxp440 /lib/alsa/modprobe-post-install snd-vxp440
> >>post-install snd-vxpocket /lib/alsa/modprobe-post-install snd-vxpocket
> >>post-install snd-wavefront /lib/alsa/modprobe-post-install snd-wavefront
> >>post-install snd-ymfpci /lib/alsa/modprobe-post-install snd-ymfpci
> >># Prevent abnormal drivers from grabbing index 0
> >>options snd-atiixp-modem index=-2
> >>options snd-bt87x index=-2
> >>options snd-intel8x0m index=-2
> >>options snd-via82xx-modem index=-2
> >>
> >>### update-modules: end processing /etc/modutils/alsa-base
> >>
> >>### update-modules: start processing /etc/modutils/apm
> >>alias char-major-10-134 apm
> >>alias /dev/apm_bios /dev/misc/apm_bios
> >>alias /dev/misc/apm_bios apm
> >>
> >>### update-modules: end processing /etc/modutils/apm
> >>
> >>### update-modules: start processing /etc/modutils/paths
> >># This file contains a list of paths that modprobe should scan,
> >># beside the ones that are compiled into the modutils tools
> >># themselves.
> >>
> >>### update-modules: end processing /etc/modutils/paths
> >>
> >>### update-modules: start processing /etc/modutils/arch/i386
> >>alias parport_lowlevel parport_pc
> >>alias char-major-10-144 nvram
> >>alias binfmt-0064 binfmt_aout
> >>alias char-major-10-135 rtc
> >>
> >>### update-modules: end processing /etc/modutils/arch/i386
> >>
> >>ev:/home/janus#
> >>
> >>_________________________________________________________________
> >>Sadece sohbet ile yetinmeyin - eglneceye de doymak için Messenger'i tercih
> >>edin! http://messenger.msn.com/?mkt=tr&DI=3490&XAPID=2584
> >>
> >>--
> >>To UNSUBSCRIBE, email to debian-user-turkish-REQUEST@lists.debian.org
> >>with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
> >>
> >>
> >>
> >>
> >
> >
> >
> >
>
>
Reply to: