kernel deshabilita IRQ #21
Hola; me ha pasado ya varias veces;
tengo una mezcla de testint-sid-experimental; casi todo sid y
experimental; uso kde 4.2.2 y tengo un macbook santa rosa.
ah, y el kernel que estaba usando era
$ uname -a
Linux manzanita 2.6.26-1-amd64 #1 SMP Sat Jan 10 17:57:00 UTC 2009
x86_64 GNU/Linux
el caso es que estaba trabajando tan tranquilo creo que con iceweasel
y me avisa la baneja de kde que hubo un problema y que el kernel me
deshabilito la irq 21; y me empieza a ir todo lentinisimo, desde el
touchpad hasta al teclear cualquier cosa tarda un montón en salirme
por la pantalla. El caso es que hice un dmesg y lo metí a un fichero,
que es el que va como adjunto. A ver se os pasó alguna vez a alguno de
vosotros o sabe a donde debería enviar la información del bug.
Un saludo
--
Brais Arias Rio
============
braisarias.com
gaveto.org
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-1-amd64 (Debian 2.6.26-13) (waldi@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Sat Jan 10 17:57:00 UTC 2009
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.26-1-amd64 root=UUID=504100bb-e6f5-425e-85f0-7698771217f3 ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007dd31000 (usable)
[ 0.000000] BIOS-e820: 000000007dd31000 - 000000007df32000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007df32000 - 000000007dfe5000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007dfe5000 - 000000007dfe7000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007dfe7000 - 000000007eec3000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007eec3000 - 000000007eec5000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007eec5000 - 000000007eec8000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007eec8000 - 000000007eecb000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007eecb000 - 000000007eecc000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007eecc000 - 000000007eedf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007eedf000 - 000000007eef9000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007eef9000 - 000000007eeff000 (reserved)
[ 0.000000] BIOS-e820: 000000007eeff000 - 000000007ef00000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ef00000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 515377) 1 entries of 3200 used
[ 0.000000] max_pfn_mapped = 1048576
[ 0.000000] init_memory_mapping
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP 000FE020, 0024 (r2 APPLE )
[ 0.000000] ACPI: XSDT 7EEEE1C0, 0084 (r1 APPLE Apple00 C1 1000013)
[ 0.000000] ACPI: FACP 7EEEC000, 00F4 (r3 APPLE Apple00 C1 Loki 5F)
[ 0.000000] ACPI: DSDT 7EEE1000, 45C6 (r1 APPLE MacBook 40001 INTL 20061109)
[ 0.000000] ACPI: FACS 7EECC000, 0040
[ 0.000000] ACPI: HPET 7EEEB000, 0038 (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: APIC 7EEEA000, 0068 (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: MCFG 7EEE9000, 003C (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: ASF! 7EEE8000, 00A5 (r32 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: SBST 7EEE7000, 0030 (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: ECDT 7EEE6000, 0053 (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: SSDT 7EEC7000, 04DC (r1 APPLE CpuPm 3000 INTL 20061109)
[ 0.000000] ACPI: SSDT 7EEC6000, 025F (r1 APPLE Cpu0Tst 3000 INTL 20061109)
[ 0.000000] ACPI: SSDT 7EEC5000, 00A6 (r1 APPLE Cpu1Tst 3000 INTL 20061109)
[ 0.000000] ACPI: SSDT 7EEE0000, 0544 (r1 SataRe SataPri 1000 INTL 20061109)
[ 0.000000] ACPI: SSDT 7EEDF000, 0477 (r1 SataRe SataSec 1000 INTL 20061109)
[ 0.000000] ACPI: DMI detected: Apple
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007dd31000
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 515377) 1 entries of 3200 used
[ 0.000000] Bootmem setup node 0 0000000000000000-000000007dd31000
[ 0.000000] NODE_DATA [000000000000c000 - 0000000000010fff]
[ 0.000000] bootmap [0000000000011000 - 0000000000020ba7] pages 10
[ 0.000000] early res: 0 [0-fff] BIOS data page
[ 0.000000] early res: 1 [6000-7fff] TRAMPOLINE
[ 0.000000] early res: 2 [200000-675397] TEXT DATA BSS
[ 0.000000] early res: 3 [377f3000-37fefa33] RAMDISK
[ 0.000000] early res: 4 [9fc00-fffff] BIOS reserved
[ 0.000000] early res: 5 [8000-bfff] PGTABLE
[ 0.000000] [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff810001200000-ffff810002dfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 515377
[ 0.000000] On node 0 totalpages: 515280
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1244 pages reserved
[ 0.000000] DMA zone: 2699 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 6991 pages used for memmap
[ 0.000000] DMA32 zone: 504290 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 37168 bytes of per cpu data
[ 0.000000] NR_CPUS: 32, nr_cpu_ids: 2
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 506989
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.26-1-amd64 root=UUID=504100bb-e6f5-425e-85f0-7698771217f3 ro quiet
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] TSC calibrated against PM_TIMER
[ 0.000000] time.c: Detected 2393.999 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Checking aperture...
[ 0.004000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.004000] Memory: 2019424k/2061508k available (2226k kernel code, 41696k reserved, 1082k data, 392k init)
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] hpet clockevent registered
[ 0.083858] Calibrating delay using timer specific routine.. 4792.96 BogoMIPS (lpj=9585939)
[ 0.083895] Security Framework initialized
[ 0.083901] SELinux: Disabled at boot.
[ 0.083904] Capability LSM initialized
[ 0.084005] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.084005] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.084005] Mount-cache hash table entries: 256
[ 0.084005] Initializing cgroup subsys ns
[ 0.084005] Initializing cgroup subsys cpuacct
[ 0.084005] Initializing cgroup subsys devices
[ 0.084005] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.084005] CPU: L2 cache: 3072K
[ 0.084005] CPU 0/0 -> Node 0
[ 0.084005] CPU: Physical Processor ID: 0
[ 0.084005] CPU: Processor Core ID: 0
[ 0.084005] CPU0: Thermal monitoring enabled (TM2)
[ 0.084005] using mwait in idle threads.
[ 0.084005] ACPI: Core revision 20080321
[ 0.131618] CPU0: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06
[ 0.131621] Using local APIC timer interrupts.
[ 0.136008] APIC timer calibration result 12468777
[ 0.136008] Detected 12.468 MHz APIC timer.
[ 0.136008] Booting processor 1/1 ip 6000
[ 0.144009] Initializing CPU#1
[ 0.144009] Calibrating delay using timer specific routine.. 4788.05 BogoMIPS (lpj=9576108)
[ 0.144009] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.144009] CPU: L2 cache: 3072K
[ 0.144009] CPU 1/1 -> Node 0
[ 0.144009] CPU: Physical Processor ID: 0
[ 0.144009] CPU: Processor Core ID: 1
[ 0.144009] CPU1: Thermal monitoring enabled (TM2)
[ 0.224014] CPU1: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06
[ 0.224014] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.228014] Brought up 2 CPUs
[ 0.228014] Total of 2 processors activated (9581.02 BogoMIPS).
[ 0.228014] CPU0 attaching sched-domain:
[ 0.228014] domain 0: span 0-1
[ 0.228014] groups: 0 1
[ 0.228014] domain 1: span 0-1
[ 0.228014] groups: 0-1
[ 0.228014] CPU1 attaching sched-domain:
[ 0.228014] domain 0: span 0-1
[ 0.228014] groups: 1 0
[ 0.228014] domain 1: span 0-1
[ 0.228014] groups: 0-1
[ 0.228014] net_namespace: 1224 bytes
[ 0.228014] Booting paravirtualized kernel on bare hardware
[ 0.228014] NET: Registered protocol family 16
[ 0.228014] ACPI: bus type pci registered
[ 0.228014] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255
[ 0.228014] PCI: Not using MMCONFIG.
[ 0.228014] PCI: Using configuration type 1 for base access
[ 0.228014] ACPI: EC: EC description table is found, configuring boot EC
[ 0.144009] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.243882] ACPI: BIOS _OSI(Linux) query ignored via DMI
[ 0.244015] ACPI: Interpreter enabled
[ 0.244015] ACPI: (supports S0 S3 S4 S5)
[ 0.244015] ACPI: Using IOAPIC for interrupt routing
[ 0.244015] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255
[ 0.253466] PCI: BIOS Bug: MCFG area at f0000000 is not reserved in ACPI motherboard resources
[ 0.253520] PCI: Not using MMCONFIG.
[ 0.268062] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.268062] ACPI: EC: driver started in interrupt mode
[ 0.268062] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.268062] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 0.268062] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[ 0.271326] PCI: Transparent bridge - 0000:00:1e.0
[ 0.271367] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.271731] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.271851] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 0.271984] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.282095] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.282095] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *7 11 12 14 15)
[ 0.282095] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.282095] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.282095] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.282095] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *9
[ 0.282095] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.282095] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.282095] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.282095] pnp: PnP ACPI init
[ 0.282095] ACPI: bus type pnp registered
[ 0.282095] pnp 00:00: parse allocated resources
[ 0.282095] pnp 00:00: add io 0xcf8-0xcff flags 0x1
[ 0.282095] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.282095] pnp 00:01: parse allocated resources
[ 0.282095] pnp 00:01: add mem 0xfed1c000-0xfed1ffff flags 0x1
[ 0.282095] pnp 00:01: add mem 0xfed14000-0xfed17fff flags 0x1
[ 0.282095] pnp 00:01: add mem 0xfed18000-0xfed18fff flags 0x1
[ 0.282095] pnp 00:01: add mem 0xfed19000-0xfed19fff flags 0x1
[ 0.282095] pnp 00:01: add mem 0xf0000000-0xf3ffffff flags 0x1
[ 0.282095] pnp 00:01: add mem 0xfed20000-0xfed3ffff flags 0x1
[ 0.282095] pnp 00:01: add mem 0xfed45000-0xfed8ffff flags 0x1
[ 0.282095] pnp 00:01: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[ 0.282095] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.282095] pnp 00:02: parse allocated resources
[ 0.282095] pnp 00:02: add io 0x300-0x31f flags 0x1
[ 0.282095] pnp 00:02: add irq 6 flags 0x1
[ 0.282095] pnp 00:02: Plug and Play ACPI device, IDs APP0001 (active)
[ 0.282095] pnp 00:03: parse allocated resources
[ 0.282095] pnp 00:03: add io 0x0-0x1f flags 0x1
[ 0.282095] pnp 00:03: add io 0x81-0x91 flags 0x1
[ 0.282095] pnp 00:03: add io 0x93-0x9f flags 0x1
[ 0.282095] pnp 00:03: add io 0xc0-0xdf flags 0x1
[ 0.282095] pnp 00:03: add dma 4 flags 0x1
[ 0.282095] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.282095] pnp 00:04: parse allocated resources
[ 0.282095] pnp 00:04: add mem 0xff000000-0xffffffff flags 0x0
[ 0.282095] pnp 00:04: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.282095] pnp 00:05: parse allocated resources
[ 0.282095] pnp 00:05: add irq 8 flags 0x1
[ 0.282095] pnp 00:05: add mem 0xfed00000-0xfed003ff flags 0x0
[ 0.282095] pnp 00:05: PNP0c01: calling quirk_system_pci_resources+0x0/0x15c
[ 0.282095] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.282095] pnp 00:06: parse allocated resources
[ 0.282095] pnp 00:06: add io 0xf0-0xf0 flags 0x1
[ 0.282105] pnp 00:06: add irq 13 flags 0x1
[ 0.286095] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.286095] pnp 00:07: parse allocated resources
[ 0.286095] pnp 00:07: add io 0x2e-0x2f flags 0x1
[ 0.286095] pnp 00:07: add io 0x4e-0x4f flags 0x1
[ 0.286095] pnp 00:07: add io 0x61-0x61 flags 0x1
[ 0.286095] pnp 00:07: add io 0x63-0x63 flags 0x1
[ 0.286095] pnp 00:07: add io 0x65-0x65 flags 0x1
[ 0.286095] pnp 00:07: add io 0x67-0x67 flags 0x1
[ 0.286095] pnp 00:07: add io 0x70-0x70 flags 0x1
[ 0.286095] pnp 00:07: add io 0x80-0x80 flags 0x1
[ 0.286095] pnp 00:07: add io 0x92-0x92 flags 0x1
[ 0.286095] pnp 00:07: add io 0xb2-0xb3 flags 0x1
[ 0.286095] pnp 00:07: add io 0x680-0x69f flags 0x1
[ 0.286095] pnp 00:07: add io 0x800-0x80f flags 0x1
[ 0.286095] pnp 00:07: add io 0x810-0x817 flags 0x1
[ 0.286095] pnp 00:07: add io 0x400-0x47f flags 0x1
[ 0.286095] pnp 00:07: add io 0x500-0x53f flags 0x1
[ 0.286095] pnp 00:07: add io 0x1640-0x164f flags 0x1
[ 0.286095] pnp 00:07: PNP0c02: calling quirk_system_pci_resources+0x0/0x15c
[ 0.286095] pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.286095] pnp 00:08: parse allocated resources
[ 0.286095] pnp 00:08: add io 0x70-0x77 flags 0x1
[ 0.286095] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.290095] pnp: PnP ACPI: found 9 devices
[ 0.290095] ACPI: ACPI bus type pnp unregistered
[ 0.290095] usbcore: registered new interface driver usbfs
[ 0.290095] usbcore: registered new interface driver hub
[ 0.290095] usbcore: registered new device driver usb
[ 0.290096] PCI: Using ACPI for IRQ routing
[ 0.298889] PCI-GART: No AMD northbridge found.
[ 0.298895] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.298898] hpet0: 3 64-bit timers, 14318180 Hz
[ 0.302850] ACPI: RTC can wake from S4
[ 0.317775] pnp: the driver 'system' has been registered
[ 0.317784] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
[ 0.317786] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
[ 0.317788] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
[ 0.317791] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
[ 0.317793] system 00:01: iomem range 0xf0000000-0xf3ffffff could not be reserved
[ 0.317795] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.317797] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.317799] system 00:01: driver attached
[ 0.317806] system 00:05: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.317808] system 00:05: driver attached
[ 0.317812] system 00:07: ioport range 0x680-0x69f has been reserved
[ 0.317814] system 00:07: ioport range 0x800-0x80f has been reserved
[ 0.317816] system 00:07: ioport range 0x810-0x817 has been reserved
[ 0.317818] system 00:07: ioport range 0x400-0x47f has been reserved
[ 0.317820] system 00:07: ioport range 0x500-0x53f has been reserved
[ 0.317822] system 00:07: ioport range 0x1640-0x164f has been reserved
[ 0.317824] system 00:07: driver attached
[ 0.321770] PCI: Bridge: 0000:00:1c.0
[ 0.321770] IO window: disabled.
[ 0.321770] MEM window: 0x90600000-0x906fffff
[ 0.321770] PREFETCH window: disabled.
[ 0.321770] PCI: Bridge: 0000:00:1c.4
[ 0.321770] IO window: disabled.
[ 0.321770] MEM window: 0x90500000-0x905fffff
[ 0.321770] PREFETCH window: 0x0000000090000000-0x00000000900fffff
[ 0.321770] PCI: Bridge: 0000:00:1c.5
[ 0.321770] IO window: 5000-5fff
[ 0.321770] MEM window: 0x90400000-0x904fffff
[ 0.321770] PREFETCH window: 0x0000000090800000-0x00000000908fffff
[ 0.321770] PCI: Bridge: 0000:00:1e.0
[ 0.321770] IO window: disabled.
[ 0.321770] MEM window: 0x90300000-0x903fffff
[ 0.321770] PREFETCH window: disabled.
[ 0.321770] pci 0000:00:1c.0: enabling device (0000 -> 0002)
[ 0.321770] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.321770] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.321770] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.321770] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 0.321770] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
[ 0.321770] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 0.321770] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.321770] NET: Registered protocol family 2
[ 0.357202] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.357770] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.357771] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.357771] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.357771] TCP reno registered
[ 0.366961] NET: Registered protocol family 1
[ 0.367055] checking if image is initramfs...<7>Switched to high resolution mode on CPU 1
[ 0.510609] Switched to high resolution mode on CPU 0
[ 0.649909] it is
[ 0.945901] Freeing initrd memory: 8178k freed
[ 0.950134] audit: initializing netlink socket (disabled)
[ 0.950134] type=2000 audit(1242118694.936:1): initialized
[ 0.950141] Total HugeTLB memory allocated, 0
[ 0.950141] VFS: Disk quotas dquot_6.5.1
[ 0.950141] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.950141] msgmni has been set to 3960
[ 0.950141] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.950141] io scheduler noop registered
[ 0.950141] io scheduler anticipatory registered
[ 0.950141] io scheduler deadline registered
[ 0.950141] io scheduler cfq registered (default)
[ 0.950141] pci 0000:00:02.0: Boot video device
[ 0.950141] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.950141] assign_interrupt_mode Found MSI capability
[ 0.950141] Allocate Port Service[0000:00:1c.0:pcie00]
[ 0.950141] Allocate Port Service[0000:00:1c.0:pcie02]
[ 0.950141] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 0.950141] assign_interrupt_mode Found MSI capability
[ 0.950141] Allocate Port Service[0000:00:1c.4:pcie00]
[ 0.950141] Allocate Port Service[0000:00:1c.4:pcie02]
[ 0.950141] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 0.950141] assign_interrupt_mode Found MSI capability
[ 0.950141] Allocate Port Service[0000:00:1c.5:pcie00]
[ 0.950147] Allocate Port Service[0000:00:1c.5:pcie02]
[ 0.954135] hpet_resources: 0xfed00000 is busy
[ 0.954135] Linux agpgart interface v0.103
[ 0.954135] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 0.954135] pnp: the driver 'serial' has been registered
[ 0.954153] brd: module loaded
[ 0.954153] input: Macintosh mouse button emulation as /class/input/input0
[ 0.954153] pnp: the driver 'i8042 kbd' has been registered
[ 0.954153] pnp: the driver 'i8042 aux' has been registered
[ 0.954153] pnp: the driver 'i8042 kbd' has been unregistered
[ 0.954153] pnp: the driver 'i8042 aux' has been unregistered
[ 0.954153] PNP: No PS/2 controller found. Probing ports directly.
[ 0.954891] i8042.c: No controller found.
[ 0.978133] mice: PS/2 mouse device common for all mice
[ 0.978133] pnp: the driver 'rtc_cmos' has been registered
[ 0.978133] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 0.978133] rtc0: alarms up to one month, y3k
[ 0.978133] rtc_cmos 00:08: driver attached
[ 0.978133] cpuidle: using governor ladder
[ 0.978133] cpuidle: using governor menu
[ 0.978133] No iBFT detected.
[ 0.978133] TCP cubic registered
[ 0.978133] NET: Registered protocol family 17
[ 0.978133] registered taskstats version 1
[ 0.978133] rtc_cmos 00:08: setting system clock to 2009-05-12 08:58:15 UTC (1242118695)
[ 0.978133] Freeing unused kernel memory: 392k freed
[ 1.042126] ACPI: SSDT 7EECAA98, 0340 (r1 APPLE Cpu0Ist 3000 INTL 20061109)
[ 1.042430] ACPI: SSDT 7EEC8C18, 02AD (r1 APPLE Cpu0Cst 3001 INTL 20061109)
[ 1.044598] Monitor-Mwait will be used to enter C-1 state
[ 1.044601] Monitor-Mwait will be used to enter C-2 state
[ 1.044603] Monitor-Mwait will be used to enter C-3 state
[ 1.046127] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 1.046127] ACPI: ACPI0007:00 is registered as cooling_device0
[ 1.046127] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 1.046127] ACPI: SSDT 7EEC9F18, 00C8 (r1 APPLE Cpu1Ist 3000 INTL 20061109)
[ 1.046127] ACPI: SSDT 7EEC8F18, 0085 (r1 APPLE Cpu1Cst 3000 INTL 20061109)
[ 1.046959] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 1.046959] ACPI: ACPI0007:01 is registered as cooling_device1
[ 1.046959] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 1.046127] Marking TSC unstable due to TSC halts in idle
[ 1.128839] agpgart: Detected an Intel 965GM Chipset.
[ 1.130528] agpgart: Detected 15868K stolen memory.
[ 1.142524] agpgart: AGP aperture is 256M @ 0x80000000
[ 1.156999] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 21 (level, low) -> IRQ 21
[ 1.156999] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 1.156999] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.156999] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.160999] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.160999] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 1.160999] ehci_hcd 0000:00:1a.7: irq 21, io mem 0x90704c00
[ 1.173824] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 1.173891] usb usb1: configuration #1 chosen from 1 choice
[ 1.173917] hub 1-0:1.0: USB hub found
[ 1.173924] hub 1-0:1.0: 4 ports detected
[ 1.179899] Uniform Multi-Platform E-IDE driver
[ 1.179903] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 1.184798] No dock devices found.
[ 1.191614] SCSI subsystem initialized
[ 1.196863] libata version 3.00 loaded.
[ 1.281221] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.281224] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.281226] usb usb1: Product: EHCI Host Controller
[ 1.281227] usb usb1: Manufacturer: Linux 2.6.26-1-amd64 ehci_hcd
[ 1.281228] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.283207] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 20 (level, low) -> IRQ 20
[ 1.283207] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 1.283207] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.283207] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.283711] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.283717] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 1.283727] ehci_hcd 0000:00:1d.7: irq 20, io mem 0x90704800
[ 1.299538] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 1.299635] usb usb2: configuration #1 chosen from 1 choice
[ 1.299656] hub 2-0:1.0: USB hub found
[ 1.299663] hub 2-0:1.0: 6 ports detected
[ 1.404305] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.404308] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.404310] usb usb2: Product: EHCI Host Controller
[ 1.404311] usb usb2: Manufacturer: Linux 2.6.26-1-amd64 ehci_hcd
[ 1.404312] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.407657] ICH8M: IDE controller (0x8086:0x2850 rev 0x03) at PCI slot 0000:00:1f.1
[ 1.407657] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 21 (level, low) -> IRQ 21
[ 1.407657] ICH8M: 100% native mode on irq 21
[ 1.407657] ide0: BM-DMA at 0x60e0-0x60e7
[ 1.407657] ide1: BM-DMA at 0x60e8-0x60ef
[ 1.407657] Probing IDE interface ide0...
[ 1.464130] USB Universal Host Controller Interface driver v3.0
[ 1.512690] Clocksource tsc unstable (delta = -256148407 ns)
[ 1.763173] usb 2-4: new high speed USB device using ehci_hcd and address 2
[ 1.894883] usb 2-4: configuration #1 chosen from 1 choice
[ 1.894883] usb 2-4: New USB device found, idVendor=05ac, idProduct=8300
[ 1.894883] usb 2-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.142763] hda: HL-DT-ST DVDRW GSA-S10N, ATAPI CD/DVD-ROM drive
[ 2.480299] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 2.483569] hda: UDMA/33 mode selected
[ 2.483569] Probing IDE interface ide1...
[ 3.047517] ide0 at 0x6108-0x610f,0x6126 on irq 21
[ 3.050961] ide1 at 0x6100-0x6107,0x6122 on irq 21
[ 3.050961] ata_piix 0000:00:1f.2: version 2.12
[ 3.050961] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 18 (level, low) -> IRQ 18
[ 3.050961] ata_piix 0000:00:1f.2: MAP [ P0 -- -- -- ]
[ 3.050961] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 3.050986] scsi0 : ata_piix
[ 3.054517] scsi1 : ata_piix
[ 3.054517] ata1: SATA max UDMA/133 cmd 0x60f8 ctl 0x611c bmdma 0x6020 irq 18
[ 3.054517] ata2: SATA max UDMA/133 cmd 0x60f0 ctl 0x6118 bmdma 0x6028 irq 18
[ 3.213668] ata1.00: ATA-8: FUJITSU MHY2160BH, 0081000D, max UDMA/100
[ 3.213671] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.229566] ata1.00: configured for UDMA/100
[ 3.396259] isa bounce pool size: 16 pages
[ 3.396320] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHY2160B 0081 PQ: 0 ANSI: 5
[ 3.396411] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 3.396420] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 3.404911] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 3.404911] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 3.404911] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 3.404911] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 3.404911] uhci_hcd 0000:00:1a.0: irq 20, io base 0x000060c0
[ 3.404911] usb usb3: configuration #1 chosen from 1 choice
[ 3.404911] hub 3-0:1.0: USB hub found
[ 3.404911] hub 3-0:1.0: 2 ports detected
[ 3.468774] ssb: Sonics Silicon Backplane found on PCI device 0000:02:00.0
[ 3.468979] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 3.469008] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 3.472327] sky2 0000:03:00.0: v1.21 addr 0x90400000 irq 17 Yukon-EC Ultra (0xb4) rev 3
[ 3.472327] sky2 eth0: addr 00:1f:f3:52:e5:ad
[ 3.472327] ACPI: PCI Interrupt 0000:04:03.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 3.523817] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[90300000-903007ff] Max Packet=[2048] IR/IT contexts=[8/8]
[ 3.533866] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.533866] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.533866] usb usb3: Product: UHCI Host Controller
[ 3.533866] usb usb3: Manufacturer: Linux 2.6.26-1-amd64 uhci_hcd
[ 3.533866] usb usb3: SerialNumber: 0000:00:1a.0
[ 3.533866] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 16 (level, low) -> IRQ 16
[ 3.533866] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 3.533866] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 3.533866] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 3.533866] uhci_hcd 0000:00:1a.1: irq 16, io base 0x000060a0
[ 3.533866] usb usb4: configuration #1 chosen from 1 choice
[ 3.533866] hub 4-0:1.0: USB hub found
[ 3.533866] hub 4-0:1.0: 2 ports detected
[ 3.638871] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.638873] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.638875] usb usb4: Product: UHCI Host Controller
[ 3.638876] usb usb4: Manufacturer: Linux 2.6.26-1-amd64 uhci_hcd
[ 3.638878] usb usb4: SerialNumber: 0000:00:1a.1
[ 3.638959] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 3.638966] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 3.638969] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.639010] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 3.639037] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00006080
[ 3.639099] usb usb5: configuration #1 chosen from 1 choice
[ 3.639119] hub 5-0:1.0: USB hub found
[ 3.639123] hub 5-0:1.0: 2 ports detected
[ 3.743878] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.743881] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.743882] usb usb5: Product: UHCI Host Controller
[ 3.743884] usb usb5: Manufacturer: Linux 2.6.26-1-amd64 uhci_hcd
[ 3.743885] usb usb5: SerialNumber: 0000:00:1d.0
[ 3.743915] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 18 (level, low) -> IRQ 18
[ 3.743921] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 3.743924] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.743955] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 3.743981] uhci_hcd 0000:00:1d.1: irq 18, io base 0x00006060
[ 3.744041] usb usb6: configuration #1 chosen from 1 choice
[ 3.744063] hub 6-0:1.0: USB hub found
[ 3.744068] hub 6-0:1.0: 2 ports detected
[ 3.775090] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 3.848078] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.848080] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.848082] usb usb6: Product: UHCI Host Controller
[ 3.848083] usb usb6: Manufacturer: Linux 2.6.26-1-amd64 uhci_hcd
[ 3.848084] usb usb6: SerialNumber: 0000:00:1d.1
[ 3.848119] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 21
[ 3.848125] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 3.848128] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.848159] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 3.848186] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00006040
[ 3.848246] usb usb7: configuration #1 chosen from 1 choice
[ 3.848265] hub 7-0:1.0: USB hub found
[ 3.848269] hub 7-0:1.0: 2 ports detected
[ 3.952344] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.952346] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.952348] usb usb7: Product: UHCI Host Controller
[ 3.952349] usb usb7: Manufacturer: Linux 2.6.26-1-amd64 uhci_hcd
[ 3.952351] usb usb7: SerialNumber: 0000:00:1d.2
[ 3.955259] usb 3-1: configuration #1 chosen from 1 choice
[ 3.959170] usb 3-1: New USB device found, idVendor=05ac, idProduct=1000
[ 3.959170] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.959170] hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
[ 3.959170] Uniform CD-ROM driver Revision: 3.20
[ 4.039117] Driver 'sd' needs updating - please use bus_type methods
[ 4.039215] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 4.039235] sd 0:0:0:0: [sda] Write Protect is off
[ 4.039237] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.039269] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.039325] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 4.039343] sd 0:0:0:0: [sda] Write Protect is off
[ 4.039345] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.039377] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.039380] sda: sda1 sda2 sda3 sda4
[ 4.043049] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.325294] usb 7-1: new low speed USB device using uhci_hcd and address 2
[ 4.501481] usb 7-1: configuration #1 chosen from 1 choice
[ 4.515606] usb 7-1: New USB device found, idVendor=05ac, idProduct=8242
[ 4.515609] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.515611] usb 7-1: Product: IR Receiver
[ 4.515612] usb 7-1: Manufacturer: Apple Computer, Inc.
[ 4.752983] usb 7-2: new full speed USB device using uhci_hcd and address 3
[ 4.807765] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001ff3fffe63d314]
[ 4.941869] usb 7-2: configuration #1 chosen from 1 choice
[ 4.953511] usb 7-2: New USB device found, idVendor=05ac, idProduct=022a
[ 4.953511] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.953511] usb 7-2: Product: Apple Internal Keyboard / Trackpad
[ 4.953511] usb 7-2: Manufacturer: Apple Computer
[ 4.954956] usbcore: registered new interface driver hiddev
[ 4.970759] input: HID 05ac:1000 as /class/input/input1
[ 5.000169] input,hidraw0: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1a.0-1
[ 5.016030] input: HID 05ac:1000 as /class/input/input2
[ 5.028779] input,hidraw1: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1a.0-1
[ 5.049317] hiddev96hidraw2: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-1
[ 5.054105] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input3
[ 5.072379] input,hidraw3: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.2-2
[ 5.077589] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input4
[ 5.089969] input,hidraw4: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.2-2
[ 5.089993] usbcore: registered new interface driver usbhid
[ 5.089997] usbhid: v2.6:USB HID core driver
[ 5.230867] PM: Starting manual resume from disk
[ 5.252370] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 5.252370] EXT3-fs: write access will be enabled during recovery.
[ 7.624459] kjournald starting. Commit interval 5 seconds
[ 7.624459] EXT3-fs: sda3: orphan cleanup on readonly fs
[ 7.624459] ext3_orphan_cleanup: deleting unreferenced inode 4300812
[ 7.624459] ext3_orphan_cleanup: deleting unreferenced inode 4268103
[ 7.624459] ext3_orphan_cleanup: deleting unreferenced inode 4268097
[ 7.961215] ext3_orphan_cleanup: deleting unreferenced inode 4268089
[ 7.961215] ext3_orphan_cleanup: deleting unreferenced inode 4268084
[ 7.961215] ext3_orphan_cleanup: deleting unreferenced inode 4268081
[ 7.961215] ext3_orphan_cleanup: deleting unreferenced inode 4268076
[ 7.961215] ext3_orphan_cleanup: deleting unreferenced inode 4268075
[ 7.961215] ext3_orphan_cleanup: deleting unreferenced inode 4268073
[ 7.961215] ext3_orphan_cleanup: deleting unreferenced inode 4268062
[ 7.961215] ext3_orphan_cleanup: deleting unreferenced inode 4268061
[ 7.961215] ext3_orphan_cleanup: deleting unreferenced inode 4268054
[ 7.961215] ext3_orphan_cleanup: deleting unreferenced inode 4268045
[ 7.961215] ext3_orphan_cleanup: deleting unreferenced inode 4268044
[ 7.961215] EXT3-fs: sda3: 14 orphan inodes deleted
[ 7.961215] EXT3-fs: recovery complete.
[ 7.989141] EXT3-fs: mounted filesystem with ordered data mode.
[ 9.986533] udev: starting version 141
[ 9.986533] udev: deprecated sysfs layout; update the kernel or disable CONFIG_SYSFS_DEPRECATED; some udev features will not work correctly
[ 10.572016] input: Power Button (FF) as /class/input/input5
[ 10.627821] ACPI: Power Button (FF) [PWRF]
[ 10.629188] input: Lid Switch as /class/input/input6
[ 10.659645] ACPI: Lid Switch [LID0]
[ 10.661097] ACPI: AC Adapter [ADP1] (off-line)
[ 10.661097] input: Power Button (CM) as /class/input/input7
[ 10.715111] ACPI: Power Button (CM) [PWRB]
[ 10.716378] input: Sleep Button (CM) as /class/input/input8
[ 10.764168] ACPI: Sleep Button (CM) [SLPB]
[ 10.765004] input: Video Bus as /class/input/input9
[ 10.806288] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 10.913170] input: PC Speaker as /class/input/input10
[ 10.973236] ACPI: Battery Slot [BAT0] (battery present)
[ 11.084481] ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 20 (level, low) -> IRQ 20
[ 11.590242] appletouch: Geyser mode initialized.
[ 11.590242] input: appletouch as /class/input/input11
[ 11.590934] firmware: requesting isight.fw
[ 11.634038] usbcore: registered new interface driver appletouch
[ 11.708162] Unable to load isight firmware
[ 11.708162] usbcore: registered new interface driver isight_firmware
[ 11.973797] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 11.973797] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 12.008181] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[ 12.876727] Adding 2562356k swap on /dev/sda4. Priority:-1 extents:1 across:2562356k
[ 12.950425] EXT3 FS on sda3, internal journal
[ 13.901371] loop: module loaded
[ 14.037118] ndiswrapper version 1.54 loaded (smp=yes, preempt=no)
[ 14.075352] usbcore: registered new interface driver ndiswrapper
[ 16.615009] sky2 eth0: enabling interface
[ 19.407898] NET: Registered protocol family 10
[ 19.407898] lo: Disabled Privacy Extensions
[ 19.407898] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 26.262354] Bluetooth: Core ver 2.11
[ 26.262354] NET: Registered protocol family 31
[ 26.262354] Bluetooth: HCI device and connection manager initialized
[ 26.262354] Bluetooth: HCI socket layer initialized
[ 26.298429] Bluetooth: L2CAP ver 2.9
[ 26.298429] Bluetooth: L2CAP socket layer initialized
[ 26.420653] usb 3-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -71
[ 26.484474] Bluetooth: RFCOMM socket layer initialized
[ 26.484474] Bluetooth: RFCOMM TTY layer initialized
[ 26.484474] Bluetooth: RFCOMM ver 1.8
[ 26.696270] usb 3-1: USB disconnect, address 2
[ 27.040724] usb 3-1: new full speed USB device using uhci_hcd and address 3
[ 27.199341] pnp: the driver 'parport_pc' has been registered
[ 27.199341] lp: driver loaded but no devices found
[ 27.239444] usb 3-1: configuration #1 chosen from 1 choice
[ 27.248383] usb 3-1: New USB device found, idVendor=05ac, idProduct=8205
[ 27.248383] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 27.429206] ppdev: user-space parallel port driver
[ 27.502785] Bluetooth: HCI USB driver ver 2.9
[ 27.502785] usbcore: registered new interface driver hci_usb
[ 29.733259] ACPI: PCI interrupt for device 0000:02:00.0 disabled
[ 29.738451] usbcore: deregistering interface driver ndiswrapper
[ 29.748763] ndiswrapper version 1.54 loaded (smp=yes, preempt=no)
[ 29.941333] ndiswrapper (link_pe_images:575): fixing KI_USER_SHARED_DATA address in the driver
[ 29.953959] ndiswrapper: driver bcmwl5 (Broadcom,10/12/2006, 4.100.15.5) loaded
[ 29.953998] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 29.953998] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 29.970764] ndiswrapper: using IRQ 16
[ 30.220659] wlan0: ethernet device 00:1f:5b:b4:09:bd using NDIS driver: bcmwl5, version: 0x4640f05, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 14E4:4328.5.conf
[ 30.220659] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
[ 30.236543] usbcore: registered new interface driver ndiswrapper
[ 30.612618] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 32.881099] [drm] Initialized drm 1.1.0 20060810
[ 32.885066] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 32.885066] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 32.885519] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 32.887703] [drm:i915_getparam] *ERROR* Unknown parameter 5
[ 34.356910] [drm:i915_getparam] *ERROR* Unknown parameter 5
[ 34.888433] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 35.563910] appletouch: incomplete data package (first byte: 2, length: 4).
[ 56.040958] CPU0 attaching NULL sched-domain.
[ 56.040958] CPU1 attaching NULL sched-domain.
[ 56.060062] CPU0 attaching sched-domain:
[ 56.060077] domain 0: span 0-1
[ 56.060082] groups: 0 1
[ 56.060089] domain 1: span 0-1
[ 56.060093] groups: 0-1
[ 56.060098] domain 2: span 0-1
[ 56.060102] groups: 0-1
[ 56.060109] CPU1 attaching sched-domain:
[ 56.060113] domain 0: span 0-1
[ 56.060117] groups: 1 0
[ 56.060123] domain 1: span 0-1
[ 56.060126] groups: 0-1
[ 56.060132] domain 2: span 0-1
[ 56.060135] groups: 0-1
[ 64.672370] nepomukservices[3977]: segfault at 48 ip 7fe16533eb2e sp 7fff6d93db60 error 4 in libQtCore.so.4.5.1[7fe1652d5000+23f000]
[ 108.926464] ndiswrapper (iw_set_auth:1602): invalid cmd 12
[ 109.524140] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 120.450343] wlan0: no IPv6 routers present
[ 141.641822] ndiswrapper (iw_set_auth:1602): invalid cmd 12
[ 151.775650] ndiswrapper (iw_set_auth:1602): invalid cmd 12
[ 712.684107] CE: hpet increasing min_delta_ns to 15000 nsec
[ 2293.466292] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2293.466292] ide: failed opcode was: unknown
[ 2293.466292] hda: drive not ready for command
[ 2295.541050] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2295.541050] ide: failed opcode was: unknown
[ 2295.541050] hda: drive not ready for command
[ 2295.541050] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2295.541050] ide: failed opcode was: unknown
[ 2295.541050] hda: drive not ready for command
[ 2295.541050] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2295.541050] ide: failed opcode was: unknown
[ 2295.541050] hda: drive not ready for command
[ 2295.541050] hda: weird block size 0
[ 2295.541050] hda: default to 2kb block size
[ 2295.541050] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2295.541050] ide: failed opcode was: unknown
[ 2295.541050] hda: drive not ready for command
[ 2295.541050] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2295.541050] ide: failed opcode was: unknown
[ 2295.541050] hda: drive not ready for command
[ 2295.541051] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2295.541051] ide: failed opcode was: unknown
[ 2295.541051] hda: drive not ready for command
[ 2295.541051] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2295.541051] ide: failed opcode was: unknown
[ 2295.541051] hda: drive not ready for command
[ 2295.543779] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2295.543786] ide: failed opcode was: unknown
[ 2295.543808] hda: drive not ready for command
[ 2295.543897] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2295.543905] ide: failed opcode was: unknown
[ 2295.543918] hda: drive not ready for command
[ 2295.563368] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2295.563386] ide: failed opcode was: unknown
[ 2295.563396] hda: drive not ready for command
[ 2295.563645] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2295.563653] ide: failed opcode was: unknown
[ 2295.563675] hda: drive not ready for command
[ 2295.563698] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2295.563698] ide: failed opcode was: unknown
[ 2295.563698] hda: drive not ready for command
[ 2295.563698] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2295.563698] ide: failed opcode was: unknown
[ 2295.563698] hda: drive not ready for command
[ 2295.563698] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2295.563698] ide: failed opcode was: unknown
[ 2295.563698] hda: drive not ready for command
[ 2295.563698] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2295.563698] ide: failed opcode was: unknown
[ 2295.563698] hda: drive not ready for command
[ 2295.563698] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2295.563698] ide: failed opcode was: unknown
[ 2295.563698] hda: drive not ready for command
[ 2295.563807] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2295.563807] ide: failed opcode was: unknown
[ 2295.563807] hda: drive not ready for command
[ 2295.587485] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2295.587485] ide: failed opcode was: unknown
[ 2295.587485] hda: drive not ready for command
[ 2295.587485] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2295.587485] ide: failed opcode was: unknown
[ 2295.587532] hda: drive not ready for command
[ 2295.587618] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2295.587625] ide: failed opcode was: unknown
[ 2295.587631] hda: drive not ready for command
[ 2295.587734] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2295.587741] ide: failed opcode was: unknown
[ 2295.587752] hda: drive not ready for command
[ 2295.587756] hda: weird block size 0
[ 2295.587774] hda: default to 2kb block size
[ 2295.587857] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2295.587864] ide: failed opcode was: unknown
[ 2295.587886] hda: drive not ready for command
[ 2295.587975] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2295.587983] ide: failed opcode was: unknown
[ 2295.588005] hda: drive not ready for command
[ 2295.588093] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2295.588100] ide: failed opcode was: unknown
[ 2295.588105] hda: drive not ready for command
[ 2295.588180] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2295.588187] ide: failed opcode was: unknown
[ 2295.588209] hda: drive not ready for command
[ 2295.588354] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2295.588361] ide: failed opcode was: unknown
[ 2295.588384] hda: drive not ready for command
[ 2295.588471] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2295.588479] ide: failed opcode was: unknown
[ 2295.588484] hda: drive not ready for command
[ 2295.588564] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2295.588571] ide: failed opcode was: unknown
[ 2295.588588] hda: drive not ready for command
[ 2295.588592] hda: weird block size 0
[ 2295.588595] hda: default to 2kb block size
[ 2295.588684] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2295.588691] ide: failed opcode was: unknown
[ 2295.588713] hda: drive not ready for command
[ 2295.588718] cdrom: This disc doesn't have any tracks I recognize!
[ 2295.588879] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2295.588887] ide: failed opcode was: unknown
[ 2295.588908] hda: drive not ready for command
[ 2295.589038] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2295.589046] ide: failed opcode was: unknown
[ 2295.589068] hda: drive not ready for command
[ 2295.589193] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2295.589200] ide: failed opcode was: unknown
[ 2295.589207] hda: drive not ready for command
[ 2295.589317] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2295.589324] ide: failed opcode was: unknown
[ 2295.589330] hda: drive not ready for command
[ 2295.589432] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2295.589439] ide: failed opcode was: unknown
[ 2295.589446] hda: drive not ready for command
[ 2295.589451] hda: weird block size 0
[ 2295.589454] hda: default to 2kb block size
[ 2295.589541] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2295.589549] ide: failed opcode was: unknown
[ 2295.589568] hda: drive not ready for command
[ 2295.589654] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2295.589662] ide: failed opcode was: unknown
[ 2295.589683] hda: drive not ready for command
[ 2295.589773] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2295.589782] ide: failed opcode was: unknown
[ 2295.589787] hda: drive not ready for command
[ 2295.589808] hda: weird block size 0
[ 2295.589811] hda: default to 2kb block size
[ 2295.589890] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2295.589898] ide: failed opcode was: unknown
[ 2295.589903] hda: drive not ready for command
[ 2295.592520] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2295.592530] ide: failed opcode was: unknown
[ 2295.592548] hda: drive not ready for command
[ 2297.624145] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2297.624145] ide: failed opcode was: unknown
[ 2297.624145] hda: drive not ready for command
[ 2297.624145] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2297.624145] ide: failed opcode was: unknown
[ 2297.624145] hda: drive not ready for command
[ 2297.624145] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2297.624145] ide: failed opcode was: unknown
[ 2297.624145] hda: drive not ready for command
[ 2297.624145] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2297.624145] ide: failed opcode was: unknown
[ 2297.624145] hda: drive not ready for command
[ 2297.624145] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2297.624145] ide: failed opcode was: unknown
[ 2297.624145] hda: drive not ready for command
[ 2299.708274] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2299.708283] ide: failed opcode was: unknown
[ 2299.708296] hda: drive not ready for command
[ 2299.708366] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2299.708370] ide: failed opcode was: unknown
[ 2299.708372] hda: drive not ready for command
[ 2299.708431] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2299.708433] ide: failed opcode was: unknown
[ 2299.708441] hda: drive not ready for command
[ 2299.708526] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2299.708531] ide: failed opcode was: unknown
[ 2299.708533] hda: drive not ready for command
[ 2299.708611] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2299.708614] ide: failed opcode was: unknown
[ 2299.708616] hda: drive not ready for command
[ 2300.201212] irq 21: nobody cared (try booting with the "irqpoll" option)
[ 2300.201212] Pid: 0, comm: swapper Tainted: P 2.6.26-1-amd64 #1
[ 2300.201212]
[ 2300.201212] Call Trace:
[ 2300.201212] <IRQ> [<ffffffff8026c6c3>] __report_bad_irq+0x30/0x72
[ 2300.201212] [<ffffffff8026c902>] note_interrupt+0x1fd/0x23b
[ 2300.201212] [<ffffffff8026d18b>] handle_fasteoi_irq+0xa5/0xc8
[ 2300.201212] [<ffffffff8020f5e4>] do_IRQ+0x6d/0xd9
[ 2300.201212] [<ffffffff8020c46d>] ret_from_intr+0x0/0x19
[ 2300.201212] <EOI> [<ffffffffa000c26d>] :processor:acpi_idle_enter_bm+0x2b3/0x327
[ 2300.201212] [<ffffffff803aa0e4>] cpuidle_idle_call+0x7a/0xb2
[ 2300.201212] [<ffffffff803aa06a>] cpuidle_idle_call+0x0/0xb2
[ 2300.201212] [<ffffffff8020ac79>] cpu_idle+0x89/0xb3
[ 2300.201212]
[ 2300.201212] handlers:
[ 2300.201212] [<ffffffff8038ec33>] (usb_hcd_irq+0x0/0x78)
[ 2300.201212] [<ffffffffa006d454>] (ide_intr+0x0/0x1f4 [ide_core])
[ 2300.201212] [<ffffffffa006d454>] (ide_intr+0x0/0x1f4 [ide_core])
[ 2300.201212] [<ffffffff8038ec33>] (usb_hcd_irq+0x0/0x78)
[ 2300.201212] Disabling IRQ #21
[ 2301.737838] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2301.737849] ide: failed opcode was: unknown
[ 2301.737857] hda: drive not ready for command
[ 2301.737906] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2301.737911] ide: failed opcode was: unknown
[ 2301.737915] hda: drive not ready for command
[ 2301.737955] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2301.737960] ide: failed opcode was: unknown
[ 2301.737964] hda: drive not ready for command
[ 2301.738018] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2301.738023] ide: failed opcode was: unknown
[ 2301.738027] hda: drive not ready for command
[ 2301.738074] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2301.738079] ide: failed opcode was: unknown
[ 2301.738083] hda: drive not ready for command
[ 2303.768179] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2303.768186] ide: failed opcode was: unknown
[ 2303.768190] hda: drive not ready for command
[ 2303.768245] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2303.768248] ide: failed opcode was: unknown
[ 2303.768250] hda: drive not ready for command
[ 2303.768288] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2303.768290] ide: failed opcode was: unknown
[ 2303.768292] hda: drive not ready for command
[ 2303.768338] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2303.768340] ide: failed opcode was: unknown
[ 2303.768343] hda: drive not ready for command
[ 2303.768384] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2303.768387] ide: failed opcode was: unknown
[ 2303.768388] hda: drive not ready for command
[ 2305.794167] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2305.794183] ide: failed opcode was: unknown
[ 2305.794193] hda: drive not ready for command
[ 2305.794249] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2305.794257] ide: failed opcode was: unknown
[ 2305.794263] hda: drive not ready for command
[ 2305.794308] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2305.794316] ide: failed opcode was: unknown
[ 2305.794321] hda: drive not ready for command
[ 2305.794383] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2305.794391] ide: failed opcode was: unknown
[ 2305.794397] hda: drive not ready for command
[ 2305.794451] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2305.794459] ide: failed opcode was: unknown
[ 2305.794464] hda: drive not ready for command
[ 2307.812939] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2307.812957] ide: failed opcode was: unknown
[ 2307.812968] hda: drive not ready for command
[ 2307.815287] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2307.815301] ide: failed opcode was: unknown
[ 2307.815308] hda: drive not ready for command
[ 2307.815732] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2307.815747] ide: failed opcode was: unknown
[ 2307.815754] hda: drive not ready for command
[ 2307.815848] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2307.815855] ide: failed opcode was: unknown
[ 2307.815862] hda: drive not ready for command
[ 2307.815943] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2307.815951] ide: failed opcode was: unknown
[ 2307.815956] hda: drive not ready for command
[ 2309.833437] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2309.833445] ide: failed opcode was: unknown
[ 2309.833449] hda: drive not ready for command
[ 2309.833520] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2309.833523] ide: failed opcode was: unknown
[ 2309.833525] hda: drive not ready for command
[ 2309.833590] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2309.833593] ide: failed opcode was: unknown
[ 2309.833595] hda: drive not ready for command
[ 2309.833668] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2309.833671] ide: failed opcode was: unknown
[ 2309.833673] hda: drive not ready for command
[ 2309.833721] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2309.833724] ide: failed opcode was: unknown
[ 2309.833726] hda: drive not ready for command
[ 2311.869456] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2311.869474] ide: failed opcode was: unknown
[ 2311.869486] hda: drive not ready for command
[ 2311.869564] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2311.869572] ide: failed opcode was: unknown
[ 2311.869578] hda: drive not ready for command
[ 2311.869642] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2311.869650] ide: failed opcode was: unknown
[ 2311.869655] hda: drive not ready for command
[ 2311.871614] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2311.871622] ide: failed opcode was: unknown
[ 2311.871629] hda: drive not ready for command
[ 2311.871710] hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 2311.871717] ide: failed opcode was: unknown
[ 2311.871723] hda: drive not ready for command
[ 2374.692432] hda: lost interrupt
[ 2435.536157] ide-cd: cmd 0x3 timed out
[ 2435.536172] hda: lost interrupt
[ 2435.536190] hda: request sense failure: status=0x51 { DriveReady SeekComplete Error }
[ 2435.536202] hda: request sense failure: error=0x00 { }
[ 2518.480899] CPU0 attaching NULL sched-domain.
[ 2518.480899] CPU1 attaching NULL sched-domain.
[ 2518.504893] CPU0 attaching sched-domain:
[ 2518.504893] domain 0: span 0-1
[ 2518.504893] groups: 0 1
[ 2518.504893] domain 1: span 0-1
[ 2518.504893] groups: 0-1
[ 2518.504893] domain 2: span 0-1
[ 2518.504893] groups: 0-1
[ 2518.504893] CPU1 attaching sched-domain:
[ 2518.504893] domain 0: span 0-1
[ 2518.504893] groups: 1 0
[ 2518.504893] domain 1: span 0-1
[ 2518.504893] groups: 0-1
[ 2518.504893] domain 2: span 0-1
[ 2518.504893] groups: 0-1
Reply to: