Hola lista. Resulta que de buenas a primera mis dispositivos USB han dejado de funcionar y ahora no me reconoce nada. Antes, cuando insertaba un dispositivo, hacía "lsusb" y ahí estaba el mismo tan feliz. Ahora ni siquiera aparece haciendo "lsusb"... He conseguido echar a andar el ratón no se como (ídem con los pendrive), pero los auriculares USB no me los reconoce ??? ¿Qué puedo hacer? Tengo debian/testing completamente actualizada... Muchas gracias PD. Al hacer "dmesg | grep usb" me sale: usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb drivers/usb/core/inode.c: creating file 'devices' drivers/usb/core/inode.c: creating file '001' usb usb1: default language 0x0409 usb usb1: uevent usb usb1: usb_probe_device usb usb1: configuration #1 chosen from 1 choice usb usb1: adding 1-0:1.0 (config #1, interface 0) usb 1-0:1.0: uevent hub 1-0:1.0: usb_probe_interface hub 1-0:1.0: usb_probe_interface - got id hub 1-0:1.0: no power switching (usb 1.0) drivers/usb/core/inode.c: creating file '001' usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.26.8-mjj-pentium4 uhci_hcd usb usb1: SerialNumber: 0000:00:1d.0 drivers/usb/core/inode.c: creating file '002' usb usb2: default language 0x0409 usb usb2: uevent usb usb2: usb_probe_device usb usb2: configuration #1 chosen from 1 choice usb usb2: adding 2-0:1.0 (config #1, interface 0) usb 2-0:1.0: uevent hub 2-0:1.0: usb_probe_interface hub 2-0:1.0: usb_probe_interface - got id hub 2-0:1.0: no power switching (usb 1.0) drivers/usb/core/inode.c: creating file '001' usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.26.8-mjj-pentium4 uhci_hcd usb usb2: SerialNumber: 0000:00:1d.1 drivers/usb/core/inode.c: creating file '003' usb usb3: default language 0x0409 usb usb3: uevent usb usb3: usb_probe_device usb usb3: configuration #1 chosen from 1 choice usb usb3: adding 3-0:1.0 (config #1, interface 0) usb 3-0:1.0: uevent hub 3-0:1.0: usb_probe_interface hub 3-0:1.0: usb_probe_interface - got id hub 3-0:1.0: no power switching (usb 1.0) drivers/usb/core/inode.c: creating file '001' usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb 1-1: new low speed USB device using uhci_hcd and address 2 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.26.8-mjj-pentium4 uhci_hcd usb usb3: SerialNumber: 0000:00:1d.2 drivers/usb/core/inode.c: creating file '004' usb usb4: default language 0x0409 usb usb4: uevent usb usb4: usb_probe_device usb usb4: configuration #1 chosen from 1 choice usb usb4: adding 4-0:1.0 (config #1, interface 0) usb 4-0:1.0: uevent hub 4-0:1.0: usb_probe_interface hub 4-0:1.0: usb_probe_interface - got id hub 4-0:1.0: no power switching (usb 1.0) drivers/usb/core/inode.c: creating file '001' usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.26.8-mjj-pentium4 uhci_hcd usb usb4: SerialNumber: 0000:00:1d.3 drivers/usb/core/inode.c: creating file '005' usb usb5: default language 0x0409 usb usb5: uevent usb usb5: usb_probe_device usb usb5: configuration #1 chosen from 1 choice usb usb5: adding 5-0:1.0 (config #1, interface 0) usb 5-0:1.0: uevent hub 5-0:1.0: usb_probe_interface hub 5-0:1.0: usb_probe_interface - got id hub 5-0:1.0: no power switching (usb 1.0) drivers/usb/core/inode.c: creating file '001' usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: EHCI Host Controller usb usb5: Manufacturer: Linux 2.6.26.8-mjj-pentium4 ehci_hcd usb usb5: SerialNumber: 0000:00:1d.7 usb 1-1: uhci_result_common: failed with status 440000 usb usb2: suspend_rh (auto-stop) usb 1-1: uhci_result_common: failed with status 440000 usb 1-1: uhci_result_common: failed with status 440000 usb 1-1: device descriptor read/all, error -71 usb usb3: suspend_rh (auto-stop) usb usb4: suspend_rh (auto-stop) usb 1-1: new low speed USB device using uhci_hcd and address 4 usb usb2: bus auto-suspend usb usb2: suspend_rh usb usb3: bus auto-suspend usb usb3: suspend_rh usb usb4: bus auto-suspend usb usb4: suspend_rh usb 1-1: skipped 1 descriptor after interface usb 1-1: default language 0x0409 usb 1-1: uevent usb 1-1: usb_probe_device usb 1-1: configuration #1 chosen from 1 choice usb 1-1: adding 1-1:1.0 (config #1, interface 0) usb 1-1:1.0: uevent drivers/usb/core/inode.c: creating file '004' usb 1-1: New USB device found, idVendor=04fc, idProduct=0005 usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 usb 1-1: Product: USB Optical Wheel Mouse usb usb5: bus auto-suspend usb usb1: uevent usb 1-0:1.0: uevent usb 1-1: uevent usb 1-1:1.0: uevent usb usb2: uevent usb 2-0:1.0: uevent usb usb3: uevent usb 3-0:1.0: uevent usb usb4: uevent usb 4-0:1.0: uevent usb usb5: uevent usb 5-0:1.0: uevent usbhid 1-1:1.0: usb_probe_interface usbhid 1-1:1.0: usb_probe_interface - got id input: USB Optical Wheel Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/input/input3 input: USB HID v1.10 Mouse [USB Optical Wheel Mouse] on usb-0000:00:1d.0-1 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver usbcore: registered new interface driver snd-usb-audio usb usb5: usb auto-resume usb usb3: usb auto-resume usb usb3: wakeup_rh usb usb2: usb auto-resume usb usb2: wakeup_rh usb usb4: usb auto-resume usb usb4: wakeup_rh usb usb3: suspend_rh (auto-stop) usb usb2: suspend_rh (auto-stop) usb usb4: suspend_rh (auto-stop) usb usb5: bus auto-suspend usb usb3: bus auto-suspend usb usb3: suspend_rh usb usb2: bus auto-suspend usb usb2: suspend_rh usb usb4: bus auto-suspend usb usb4: suspend_rh usb usb5: usb auto-resume usb usb3: usb auto-resume usb usb3: wakeup_rh usb usb2: usb auto-resume usb usb2: wakeup_rh usb usb4: usb auto-resume usb usb4: wakeup_rh usb usb3: suspend_rh (auto-stop) usb usb2: suspend_rh (auto-stop) usb usb4: suspend_rh (auto-stop) usb usb5: bus auto-suspend usb usb3: bus auto-suspend usb usb3: suspend_rh usb usb2: bus auto-suspend usb usb2: suspend_rh usb usb4: bus auto-suspend usb usb4: suspend_rh usb usb5: usb auto-resume usb usb3: usb auto-resume usb usb3: wakeup_rh usb usb2: usb auto-resume usb usb2: wakeup_rh usb usb4: usb auto-resume usb usb4: wakeup_rh usb usb3: suspend_rh (auto-stop) usb usb2: suspend_rh (auto-stop) usb usb4: suspend_rh (auto-stop) usb usb5: bus auto-suspend usb usb3: bus auto-suspend usb usb3: suspend_rh usb usb2: bus auto-suspend usb usb2: suspend_rh usb usb4: bus auto-suspend usb usb4: suspend_rh usb usb5: usb auto-resume usb usb3: usb auto-resume usb usb3: wakeup_rh usb usb2: usb auto-resume usb usb2: wakeup_rh usb usb4: usb auto-resume usb usb4: wakeup_rh usb usb3: suspend_rh (auto-stop) usb usb2: suspend_rh (auto-stop) usb usb4: suspend_rh (auto-stop) usb usb5: bus auto-suspend usb usb3: bus auto-suspend usb usb3: suspend_rh usb usb2: bus auto-suspend usb usb2: suspend_rh usb usb4: bus auto-suspend usb usb4: suspend_rh usb usb5: usb auto-resume usb usb3: usb auto-resume usb usb3: wakeup_rh usb usb2: usb auto-resume usb usb2: wakeup_rh usb usb4: usb auto-resume usb usb4: wakeup_rh usb usb3: suspend_rh (auto-stop) usb usb2: suspend_rh (auto-stop) usb usb4: suspend_rh (auto-stop) usb usb2: bus auto-suspend usb usb2: suspend_rh usb usb4: bus auto-suspend usb usb4: suspend_rh usb usb5: bus auto-suspend usb usb3: bus auto-suspend usb usb3: suspend_rh usb usb5: usb auto-resume usb usb3: usb auto-resume usb usb3: wakeup_rh usb usb2: usb auto-resume usb usb2: wakeup_rh usb usb4: usb auto-resume usb usb4: wakeup_rh usb usb3: suspend_rh (auto-stop) usb usb2: suspend_rh (auto-stop) usb usb4: suspend_rh (auto-stop) usb usb5: bus auto-suspend usb usb3: bus auto-suspend usb usb3: suspend_rh usb usb2: bus auto-suspend usb usb2: suspend_rh usb usb4: bus auto-suspend usb usb4: suspend_rh usb usb5: usb auto-resume usb usb3: usb auto-resume usb usb3: wakeup_rh usb usb2: usb auto-resume usb usb2: wakeup_rh usb usb4: usb auto-resume usb usb4: wakeup_rh usb usb3: suspend_rh (auto-stop) usb usb2: suspend_rh (auto-stop) usb usb4: suspend_rh (auto-stop) usb usb5: bus auto-suspend usb usb3: bus auto-suspend usb usb3: suspend_rh usb usb2: bus auto-suspend usb usb2: suspend_rh usb usb4: bus auto-suspend usb usb4: suspend_rh usb usb5: usb auto-resume usb usb3: usb auto-resume usb usb3: wakeup_rh usb usb2: usb auto-resume usb usb2: wakeup_rh usb usb4: usb auto-resume usb usb4: wakeup_rh usb usb3: suspend_rh (auto-stop) usb usb2: suspend_rh (auto-stop) usb usb4: suspend_rh (auto-stop) usb usb5: bus auto-suspend usb usb3: bus auto-suspend usb usb3: suspend_rh usb usb2: bus auto-suspend usb usb2: suspend_rh usb usb4: bus auto-suspend usb usb4: suspend_rh --- .---------------------------------------------------------. | Miguel J. Jiménez | | Sector Público, ISOTROL S.A. | | mjjimenez@isotrol.com | :---------------------------------------------------------: | KeyID 0xFFE63EC6 hkp://pgp.rediris.es:11371 | :---------------------------------------------------------: | Edificio BLUENET, Avda. Isaac Newton nº3, 4ª planta. | | Parque Tecnológico Cartuja '93, 41092 Sevilla (ESP). | | Tlfn: +34 955 036 800 (ext.1805) - Fax: +34 955 036 849 | | http://www.isotrol.com | :---------------------------------------------------------: | UTM ED-50 X:765205.09 Y:4144614.91 Huso: 29 | :---------------------------------------------------------: | UEhQIGlzIE1vemFydCB3aGlsZSBKYXZhIGlzIFNhbGllcmk= | '---------------------------------------------------------'
Attachment:
signature.asc
Description: PGP signature