Re: ifconfig ethx errors/errores colissions/colisiones, ayuda.

["Carlos Miranda Molina" <debian@mstaaravin.com.ar>]

2008/10/22 Julian Esteban Perconti <vh1988@yahoo.com.ar>:

> Esto arroja ethtool en la pc proxy:
> intel95:~# ethtool eth0
> Settings for eth0:
>        Supported ports: [ TP MII ]
>        Supported link modes:   10baseT/Half 10baseT/Full
>                                100baseT/Half 100baseT/Full
>        Supports auto-negotiation: Yes
>        Advertised link modes:  10baseT/Half 10baseT/Full
>                                100baseT/Half 100baseT/Full
>        Advertised auto-negotiation: Yes
>        Speed: 100Mb/s
>        Duplex: Full
>        Port: MII
>        PHYAD: 24
>        Transceiver: internal
>        Auto-negotiation: on
>        Current message level: 0x00000001 (1)
>        Link detected: yes
> intel95:~# ethtool -S eth0
> NIC statistics:
>     tx_deferred: 0
>     tx_max_collisions: 0
>     tx_multiple_collisions: 0
>     tx_single_collisions: 0
>     rx_bad_ssd: 138

Bien, sabemos que esta funcioando en FullDuplex, curiosidad, que
switch estas usando...?
Has revisado los cables......?


Saludos


-- 
"La Voluntad es el unico motor de nuestros logros"
<Mstaaravin />
http://www.mstaaravin.com.ar/