Re: Llavero USB no monta con 2.6.26
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Que tal,
Miguel J. Jiménez escribió:
> Hola, hasta ayer utilizaba el kernel 2.6.25.6 y el llavero USB de 2GiB que tenía se montaba perfectamente como "GENERIC USB" (se trata de un minillavero con una tarjeta microsd en su interior), pero ayer instalé el nuevo kernel (2.6.26) y no lo monta (ni hace nada) aunque me lo reconoce cuando lo enchufo. Tengo otro llavero de la misma capacidad que NO es "GENERIC USB" y ese lo monta de fábula. El syslog me da la siguiente información al montar el llavero.... Dice algo de "capacidad excedida..." que NPI a qué se debe. ¿Alguien tiene idea del por qué? ¿Se trata de un error introducido en el 2.6.26? Cualquier ayuda apreciada, gracias...
>
>
Conchale, intenta revisando los módulos de usb para montaje de
almacenamiento masivo o algo así, también los permisos y privilegios
sobre los dispositivos plugdev o hotplug
De los módulos mas comunes pmount y libpmount.
Puede ser que para éste kernel nuevo necesites otras versiones de los
módulos.
>
> Jul 30 09:34:03 pitufina kernel: usb usb1: usb resume
> Jul 30 09:34:03 pitufina kernel: ehci_hcd 0000:00:1d.7: resume root hub
> Jul 30 09:34:03 pitufina kernel: hub 1-0:1.0: hub_resume
> Jul 30 09:34:03 pitufina kernel: ehci_hcd 0000:00:1d.7: GetStatus port 8 status 001803 POWER sig=j CSC CONNECT
> Jul 30 09:34:03 pitufina kernel: hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0000
> Jul 30 09:34:03 pitufina kernel: ehci_hcd 0000:00:1d.7: GetStatus port 8 status 001803 POWER sig=j CSC CONNECT
> Jul 30 09:34:03 pitufina kernel: hub 1-0:1.0: port 8, status 0501, change 0001, 480 Mb/s
> Jul 30 09:34:03 pitufina kernel: hub 1-0:1.0: debounce: port 8: total 100ms stable 100ms status 0x501
> Jul 30 09:34:03 pitufina kernel: ehci_hcd 0000:00:1d.7: port 8 high speed
> Jul 30 09:34:03 pitufina kernel: ehci_hcd 0000:00:1d.7: GetStatus port 8 status 001005 POWER sig=se0 PE CONNECT
> Jul 30 09:34:03 pitufina kernel: usb 1-8: new high speed USB device using ehci_hcd and address 7
> Jul 30 09:34:03 pitufina kernel: ehci_hcd 0000:00:1d.7: port 8 high speed
> Jul 30 09:34:03 pitufina kernel: ehci_hcd 0000:00:1d.7: GetStatus port 8 status 001005 POWER sig=se0 PE CONNECT
> Jul 30 09:34:03 pitufina kernel: usb 1-8: default language 0x0409
> Jul 30 09:34:03 pitufina kernel: usb 1-8: uevent
> Jul 30 09:34:03 pitufina kernel: usb 1-8: usb_probe_device
> Jul 30 09:34:03 pitufina kernel: usb 1-8: configuration #1 chosen from 1 choice
> Jul 30 09:34:03 pitufina kernel: usb 1-8: adding 1-8:1.0 (config #1, interface 0)
> Jul 30 09:34:03 pitufina kernel: usb 1-8:1.0: uevent
> Jul 30 09:34:03 pitufina kernel: usb-storage 1-8:1.0: usb_probe_interface
> Jul 30 09:34:03 pitufina kernel: usb-storage 1-8:1.0: usb_probe_interface - got id
> Jul 30 09:34:03 pitufina kernel: scsi7 : SCSI emulation for USB Mass Storage devices
> Jul 30 09:34:03 pitufina kernel: usb-storage: device found at 7
> Jul 30 09:34:03 pitufina kernel: usb-storage: waiting for device to settle before scanning
> Jul 30 09:34:03 pitufina kernel: drivers/usb/core/inode.c: creating file '007'
> Jul 30 09:34:03 pitufina kernel: usb 1-8: New USB device found, idVendor=090c, idProduct=6000
> Jul 30 09:34:03 pitufina kernel: usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> Jul 30 09:34:03 pitufina kernel: usb 1-8: Product: USB2.0 Card Reader
> Jul 30 09:34:03 pitufina kernel: usb 1-8: Manufacturer: Generic , .
> Jul 30 09:34:03 pitufina kernel: usb 1-8: SerialNumber: 12345678901234567890
> Jul 30 09:34:03 pitufina NetworkManager: <debug> [1217403243.773592] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_90c_6000_12345678901234567890').
> Jul 30 09:34:03 pitufina NetworkManager: <debug> [1217403243.825277] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_90c_6000_12345678901234567890_if0').
> Jul 30 09:34:03 pitufina NetworkManager: <debug> [1217403243.840448] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_90c_6000_12345678901234567890_if0_scsi_host').
> Jul 30 09:34:08 pitufina kernel: usb-storage: device scan complete
> Jul 30 09:34:08 pitufina kernel: scsi 7:0:0:0: Direct-Access Generic 6000 PQ: 0 ANSI: 0 CCS
> Jul 30 09:34:08 pitufina kernel: sd 7:0:0:0: [sdb] Sector size 0 reported, assuming 512.
> Jul 30 09:34:08 pitufina kernel: sd 7:0:0:0: [sdb] 1 512-byte hardware sectors (0 MB)
> Jul 30 09:34:08 pitufina kernel: sd 7:0:0:0: [sdb] Write Protect is off
> Jul 30 09:34:08 pitufina kernel: sd 7:0:0:0: [sdb] Mode Sense: 4b 00 00 08
> Jul 30 09:34:08 pitufina kernel: sd 7:0:0:0: [sdb] Assuming drive cache: write through
> Jul 30 09:34:08 pitufina kernel: sd 7:0:0:0: [sdb] Sector size 0 reported, assuming 512.
> Jul 30 09:34:08 pitufina kernel: sd 7:0:0:0: [sdb] 1 512-byte hardware sectors (0 MB)
> Jul 30 09:34:08 pitufina kernel: sd 7:0:0:0: [sdb] Write Protect is off
> Jul 30 09:34:08 pitufina kernel: sd 7:0:0:0: [sdb] Mode Sense: 4b 00 00 08
> Jul 30 09:34:08 pitufina kernel: sd 7:0:0:0: [sdb] Assuming drive cache: write through
> Jul 30 09:34:08 pitufina kernel: sdb: sdb1
> Jul 30 09:34:08 pitufina kernel: sdb: p1 exceeds device capacity
> Jul 30 09:34:08 pitufina kernel: sd 7:0:0:0: [sdb] Attached SCSI removable disk
> Jul 30 09:34:08 pitufina kernel: sd 7:0:0:0: Attached scsi generic sg2 type 0
> Jul 30 09:34:08 pitufina NetworkManager: <debug> [1217403248.787870] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_90c_6000_12345678901234567890_if0_scsi_host_0').
> Jul 30 09:34:08 pitufina NetworkManager: <debug> [1217403248.791592] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_90c_6000_12345678901234567890_if0_scsi_host_0_scsi_device_lun0').
> Jul 30 09:34:08 pitufina NetworkManager: <debug> [1217403248.806831] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_90c_6000_12345678901234567890_if0_scsi_host_0_scsi_device_lun0_scsi_generic').
> Jul 30 09:34:08 pitufina kernel: attempt to access beyond end of device
> Jul 30 09:34:08 pitufina kernel: sdb: rw=0, want=3932032, limit=1
> Jul 30 09:34:08 pitufina kernel: __ratelimit: 166 messages suppressed
> Jul 30 09:34:08 pitufina kernel: Buffer I/O error on device sdb1, logical block 3931776
> Jul 30 09:34:08 pitufina kernel: attempt to access beyond end of device
> Jul 30 09:34:08 pitufina kernel: sdb: rw=0, want=3932033, limit=1
> Jul 30 09:34:08 pitufina kernel: Buffer I/O error on device sdb1, logical block 3931777
> Jul 30 09:34:08 pitufina kernel: attempt to access beyond end of device
> Jul 30 09:34:08 pitufina kernel: sdb: rw=0, want=3932034, limit=1
> Jul 30 09:34:08 pitufina kernel: Buffer I/O error on device sdb1, logical block 3931778
> Jul 30 09:34:08 pitufina kernel: attempt to access beyond end of device
> Jul 30 09:34:08 pitufina kernel: sdb: rw=0, want=3932035, limit=1
> Jul 30 09:34:08 pitufina kernel: Buffer I/O error on device sdb1, logical block 3931779
> Jul 30 09:34:08 pitufina kernel: attempt to access beyond end of device
> Jul 30 09:34:08 pitufina kernel: sdb: rw=0, want=3932036, limit=1
> etc,etc,etc...
>
>
> ---
> .---------------------------------------------------------.
> | Miguel J. Jiménez |
> | Sector Público, ISOTROL S.A. |
> | mjjimenez@isotrol.com |
> :---------------------------------------------------------:
> | KeyID 0xFFE63EC6 hkp://pgp.rediris.es:11371 |
> :---------------------------------------------------------:
> | Edificio BLUENET, Avda. Isaac Newton nº3, 4ª planta. |
> | Parque Tecnológico Cartuja '93, 41092 Sevilla (ESP). |
> | Tlfn: +34 955 036 800 (ext.1805) - Fax: +34 955 036 849 |
> | http://www.isotrol.com |
> :---------------------------------------------------------:
> | UTM ED-50 X:765205.09 Y:4144614.91 Huso: 29 |
> :---------------------------------------------------------:
> | "The problem with acting normal is that normal people |
> | get into stupid situations." |
> | Dexter Morgan, Dexter (1x05) |
> '---------------------------------------------------------'
Saludos...
- --
Félix E. Urbina C.
Ciudad Guayana, Venezuela
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iD8DBQFImSiecUFpsg3GcjgRAsqRAJ979+x7qV3Cq1ejQnr7+Nz9gr83WgCgwh+j
I0WbGVCsd5RTn91WtBS8ZGY=
=4vIy
-----END PGP SIGNATURE-----
Reply to: