Re: Instalar tarjeta de red
Marcos Delgado escribió:
> El 17/11/07, Manuel García <mannyto@gmail.com> escribió:
>
>> On Nov 17, 2007 1:55 PM, perico <perico_rota@telefonica.net> wrote:
>>
>>> Manuel García escribió:
>>>
>>>> On Nov 16, 2007 2:46 PM, perico <perico_rota@telefonica.net> wrote:
>>>>
>>>>
>>>>> Manuel García escribió:
>>>>>
>>>>>
>>>>>> On 10/24/07, perico <perico_rota@telefonica.net> wrote:
>>>>>>
>>>>>>
>>>>>>
>>>>>>> He instalado Debian en un ordenador viejo con un pentium III 931mhz.
>>>>>>> con tarjeta de red 3com 3c509b etherlink III. Esta tarjeta está
>>>>>>> soportada por linux. Pero en la instalación, que ha sido correcta, no
>>>>>>> me la ha reconocido. He intentado montar la tarjeta con la
>>>>>>> herramienta "modconfi" pero este paquete no está instalado, ni tampoco
>>>>>>> está en el CD de instalación. Como puedo montar la tarjeta sin
>>>>>>> conexión a Internet.
>>>>>>> gracias
>>>>>>> perico
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> To UNSUBSCRIBE, email to debian-user-spanish-REQUEST@lists.debian.org
>>>>>>> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>> Lo primero que intentaria es utilizar el comando lspci como root para
>>>>>> ver que datos arroja el SO sobre la tarjeta, luego, con esa
>>>>>> información buscaria el modulo necesario en el kernel, y lo cargaria
>>>>>> con modprobe.
>>>>>> Basicamente, en una consola o terminal:
>>>>>>
>>>>>> 1.- su -
>>>>>> 2.- lspci -v | less
>>>>>> 3.- modprobe -l|grep nombre_modulo_posible
>>>>>> 4.- modprobe modulo
>>>>>>
>>>>>> Si no arroja error...
>>>>>>
>>>>>> 5.- nano (o vi según tu gusto) /etc/network/interfaces (para
>>>>>> asegurarnos que haya una definición para la tarjeta)
>>>>>> 6.- ifup ethX (donde la X se sustituye por el número de la tarjeta, si
>>>>>> es la única o la principal X=0)
>>>>>>
>>>>>> Game Over.
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>> Retomando el tema: Os pego el resultado de
>>>>> lspci -v | less
>>>>> 0000:00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo
>>>>> PRO133x] (rev c4)
>>>>> Subsystem: Elitegroup Computer Systems: Unknown device 0969
>>>>> Flags: bus master, medium devsel, latency 16
>>>>> Memory at d0000000 (32-bit, prefetchable) [size=64M]
>>>>> Capabilities: [a0] AGP version 2.0
>>>>> Capabilities: [c0] Power Management version 2
>>>>>
>>>>> 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo
>>>>> MVP3/Pro133x AGP] (prog-if 00 [Normal decode])
>>>>> Flags: bus master, 66MHz, medium devsel, latency 0
>>>>> Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
>>>>> Memory behind bridge: d4000000-d5ffffff
>>>>> Prefetchable memory behind bridge: d6000000-d7ffffff
>>>>> Capabilities: [80] Power Management version 2
>>>>>
>>>>> 0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C596 ISA [Mobile
>>>>> South] (rev 23)
>>>>> Subsystem: VIA Technologies, Inc. VT82C596/A/B PCI to ISA Bridge
>>>>> Flags: bus master, stepping, medium devsel, latency 0
>>>>>
>>>>> 0000:00:07.1 IDE interface: VIA Technologies, Inc.
>>>>> VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 10)
>>>>> (prog-if 8a [Master SecP PriP])
>>>>> Flags: bus master, medium devsel, latency 32
>>>>> I/O ports at e000 [size=16]
>>>>> Capabilities: [c0] Power Management version 2
>>>>>
>>>>> 0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
>>>>> 1.1 Controller (rev 11) (prog-if 00 [UHCI])
>>>>> Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
>>>>> Flags: bus master, medium devsel, latency 32, IRQ 10
>>>>> I/O ports at e400 [size=32]
>>>>> Capabilities: [80] Power Management version 2
>>>>>
>>>>> 0000:00:07.3 Host bridge: VIA Technologies, Inc. VT82C596 Power
>>>>> Management (rev 30)
>>>>> Flags: medium devsel
>>>>>
>>>>> 0000:00:0b.0 Communication controller: Conexant HCF 56k Data/Fax/Voice
>>>>> Modem (rev 08)
>>>>> Subsystem: CIS Technology Inc: Unknown device 1134
>>>>> Flags: bus master, medium devsel, latency 32, IRQ 9
>>>>> Memory at d8000000 (32-bit, non-prefetchable) [size=64K]
>>>>> I/O ports at e800 [size=8]
>>>>>
>>>>>
>>>>> 0000:00:0c.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 02)
>>>>> Subsystem: Ensoniq Creative Sound Blaster AudioPCI128
>>>>> Flags: bus master, slow devsel, latency 32, IRQ 10
>>>>> I/O ports at ec00 [size=64]
>>>>> Capabilities: [dc] Power Management version 1
>>>>>
>>>>> 0000:01:00.0 VGA compatible controller: nVidia Corporation NV5M64 [RIVA
>>>>> TNT2 Model 64/Model 64 Pro] (rev 15) (prog-if 00 [VGA])
>>>>> Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 11
>>>>> Memory at d4000000 (32-bit, non-prefetchable) [size=16M]
>>>>> Memory at d6000000 (32-bit, prefetchable) [size=32M]
>>>>> Capabilities: [60] Power Management version 1
>>>>> Capabilities: [44] AGP version 2.0
>>>>> Yo no veo mi tarjeta.
>>>>> gracias
>>>>>
>>>>>
>>>>>
>>>>>
>>>> lspci -v|grep Ethernet
>>>>
>>>>
>>>>
>>> Cuando ejecuto;
>>>
>>> lspci -v|grep Ethernet
>>>
>>> No me devuelve ninguna información.
>>> Gracias.
>>>
>>>
>> Entonces el problema es más grave, o no funciona el PCI del MoBo o no
>> funciona la terjeta, probaste cambiandola de puerto PCI a ver? o es
>> integrada?
>> --
>> Manuel Garcia
>> Administrador de redes y servidores
>> Corporacion Lynqus
>> Debian GNU/Linux 4.1
>> codename "Lenny"
>>
>>
>
> Por lo que aparece en el listado, probablemente es una tarjeta ISA. No
> he visto como configurar en la versión estable. Aparece el paquete
> isapnptools pero para Sarge.
> Saludos y buena suerte.
> Marcos Delgado.
>
>
>
He instalado la utilidad "modconf" y he intentado instalar mi tarjeta y
esto es lo que me sale:
debian:/home/pedro# modconf
Instalando el módulo 3c509. Si el dispositivo no existe, o no está
configurado correctamente, podría suponer que su sistema se pausase
hasta un minuto.
FATAL: Error inserting 3c509
(/lib/modules/2.6.12-1-686/kernel/drivers/net/3c509.ko): Unknown symbol
in module, or unknown parameter (see dmesg)
Falló la instalación.
Muchas gracias.
Reply to: