Re: [PROBLEMA PLACA DE VÍDEO - CHIPSET VIA]
Olá Rodolfo,
Muito obrigado pela ajuda.
Conseguir resolver o problema da seguinte forma:
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Modes "1366x768" "1280x960" "1024x768" "800x600" "640x480"
Virtual 1366 768
Depth 24
EndSubSection
EndSection
Em Screen eu adicionei a seguinte linha: "Modes "1366x768" "1280x960"
"1024x768" "800x600" "640x480"" e "Virtual 1366 768"
em Monitor:
Section "Monitor"
Identifier "Monitor0"
VendorName "AOC"
ModelName "F19L"
HorizSync 31.5 - 64.3
VertRefresh 40-150
EndSection
Eu modifiquei VendorName para o nome do fabricante do meu monitor em
ModelName coloquei o modelo do meu monitor e adicionei as seguintes
linhas: "HorizSync 31.5 - 64.3" "VertRefresh 40-150".
Reniciei a máquina e o problema foi resolvido.
On 2 nov, 07:50, Rodolfo <rof20...@gmail.com> wrote:
> Pode mostrar aqui como ficou após as alterações ?
>
> Em 1 de novembro de 2011 22:13, João Paulo Ferreira
> <jferreira...@gmail.com>escreveu:
>
>
>
>
>
>
>
> > Olá Rodolfo,
>
> > Eu fiz as devidas alterações porém continua a mesma coisa.
>
> > Quem puder me ajudar fico agradecido.
>
> > On 31 out, 11:40, Rodolfo <rof20...@gmail.com> wrote:
> > > O que está faltando é o flag MODES na Section "Screen", que é o que
> > define
> > > a resolução. Após a mudança reinicie o servidor X, ou a máquina mesmo se
> > > preferir. E se puder apague todos os outros modos de profundidade de cor
> > e
> > > deixe somente 24 depth.
> > > -------------------------------
> > > Section "Screen"
> > > SubSection "Display"
> > > Viewport 0 0
> > > Depth 24
> > > *Modes "1024x768"
> > > * EndSubSection
> > > EndSection
> > > -------------------------------------
>
> > > Em 30 de outubro de 2011 23:08, João Paulo Ferreira
> > > <jferreira...@gmail.com>escreveu:
>
> > > > Olá meu colegas da comunidade Debian.
>
> > > > Estou aqui mais uma vez para solicitar à ajuda de vocês.
>
> > > > O problema dessa vez está na minha placa de vídeo, hoje realizei a
> > > > instalação do Debian 6 (Squeeze) no meu desktop porém a resolução
> > > > máxima que me disponibiliza é: 800x600.
>
> > > > Já tentei configurar o xorg.conf na mão sem sucesso, instalar o drive
> > > > da via sem sucesso, pesquisei no Google e não encontrei nada.
>
> > > > Segue abaixo algumas informações interessantes.
>
> > > > LSPCI
>
> > > > 01:00.0 VGA compatible controller: VIA Technologies, Inc. CN896/VN896/
> > > > P4M900 [Chrome 9 HC] (rev 01)
>
> > > > XORG.CONF
>
> > > > Section "ServerLayout"
> > > > Identifier "X.org Configured"
> > > > Screen 0 "Screen0" 0 0
> > > > InputDevice "Mouse0" "CorePointer"
> > > > InputDevice "Keyboard0" "CoreKeyboard"
> > > > EndSection
>
> > > > Section "Files"
> > > > ModulePath "/usr/lib/xorg/modules"
> > > > FontPath "/usr/share/fonts/X11/misc"
> > > > FontPath "/usr/share/fonts/X11/cyrillic"
> > > > FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
> > > > FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
> > > > FontPath "/usr/share/fonts/X11/Type1"
> > > > FontPath "/usr/share/fonts/X11/100dpi"
> > > > FontPath "/usr/share/fonts/X11/75dpi"
> > > > FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
> > > > FontPath "built-ins"
> > > > EndSection
>
> > > > Section "Module"
> > > > Load "dri2"
> > > > Load "dri"
> > > > Load "glx"
> > > > Load "dbe"
> > > > Load "extmod"
> > > > Load "record"
> > > > EndSection
>
> > > > Section "InputDevice"
> > > > Identifier "Keyboard0"
> > > > Driver "kbd"
> > > > EndSection
>
> > > > Section "InputDevice"
> > > > Identifier "Mouse0"
> > > > Driver "mouse"
> > > > Option "Protocol" "auto"
> > > > Option "Device" "/dev/input/mice"
> > > > Option "ZAxisMapping" "4 5 6 7"
> > > > EndSection
>
> > > > Section "Monitor"
> > > > Identifier "Monitor0"
> > > > VendorName "Monitor Vendor"
> > > > ModelName "Monitor Model"
> > > > EndSection
>
> > > > Section "Device"
> > > > ### Available Driver options are:-
> > > > ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
> > > > ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
> > > > ### [arg]: arg optional
> > > > #Option "PrintVGARegs" # [<bool>]
> > > > #Option "PrintTVRegs" # [<bool>]
> > > > #Option "I2CScan" # [<bool>]
> > > > #Option "VBEModes" # [<bool>]
> > > > #Option "NoAccel" # [<bool>]
> > > > #Option "AccelMethod" # <str>
> > > > #Option "ExaNoComposite" # [<bool>]
> > > > #Option "ExaScratchSize" # <i>
> > > > #Option "SWCursor" # [<bool>]
> > > > #Option "ShadowFB" # [<bool>]
> > > > #Option "RotationType" # [<str>]
> > > > #Option "Rotate" # [<str>]
> > > > #Option "VideoRAM" # <i>
> > > > #Option "ActiveDevice" # [<str>]
> > > > #Option "BusWidth" # [<str>]
> > > > #Option "Center" # [<bool>]
> > > > #Option "PanelSize" # [<str>]
> > > > #Option "ForcePanel" # [<bool>]
> > > > #Option "TVDotCrawl" # [<bool>]
> > > > #Option "TVDeflicker" # <i>
> > > > #Option "TVType" # [<str>]
> > > > #Option "TVOutput" # [<str>]
> > > > #Option "TVPort" # [<str>]
> > > > #Option "DisableVQ" # [<bool>]
> > > > #Option "DisableIRQ" # [<bool>]
> > > > #Option "EnableAGPDMA" # [<bool>]
> > > > #Option "NoAGPFor2D" # [<bool>]
> > > > #Option "NoXVDMA" # [<bool>]
> > > > #Option "VbeSaveRestore" # [<bool>]
> > > > #Option "DisableXvBWCheck" # [<bool>]
> > > > #Option "ModeSwitchMethod" # [<str>]
> > > > #Option "MaxDRIMem" # <i>
> > > > #Option "AGPMem" # <i>
> > > > Identifier "Card0"
> > > > Driver "openchrome"
> > > > VendorName "VIA Technologies, Inc."
> > > > BoardName "CN896/VN896/P4M900 [Chrome 9 HC]"
> > > > BusID "PCI:1:0:0"
> > > > EndSection
>
> > > > Section "Screen"
> > > > Identifier "Screen0"
> > > > Device "Card0"
> > > > Monitor "Monitor0"
> > > > SubSection "Display"
> > > > Viewport 0 0
> > > > Depth 1
> > > > EndSubSection
> > > > SubSection "Display"
> > > > Viewport 0 0
> > > > Depth 4
> > > > EndSubSection
> > > > SubSection "Display"
> > > > Viewport 0 0
> > > > Depth 8
> > > > EndSubSection
> > > > SubSection "Display"
> > > > Viewport 0 0
> > > > Depth 15
> > > > EndSubSection
> > > > SubSection "Display"
> > > > Viewport 0 0
> > > > Depth 16
> > > > EndSubSection
> > > > SubSection "Display"
> > > > Viewport 0 0
> > > > Depth 24
> > > > EndSubSection
> > > > EndSection
>
> > > > [MONITOR]
>
> > > > FABRICANTE: AOC
> > > > MODEL: F19L
>
> > > > obs.: O arquivo xorg.conf foi gerado a a partir do comando: Xorg :1 -
> > > > configure
>
> > > > Desde já agradeço a disponibilidade de vocês.
>
> > > > --
> > > > To UNSUBSCRIBE, email to
> > debian-user-portuguese-REQU...@lists.debian.org
> > > > with a subject of "unsubscribe". Trouble? Contact
> > > > listmas...@lists.debian.org
> > > > Archive:
>
> > http://lists.debian.org/a16ab9e5-5c1b-4b2d-97c3-cc2861f91...@v8g2000vbe.googlegroups.com
>
> > --
> > To UNSUBSCRIBE, email to debian-user-portuguese-REQU...@lists.debian.org
> > with a subject of "unsubscribe". Trouble? Contact
> > listmas...@lists.debian.org
> > Archive:
> > http://lists.debian.org/16676ed7-e0f3-4125-bd5f-716280f68...@gk10g2000vbb.googlegroups.com
Reply to: