ausgabe von smartctl und RAW_VALUE
hallo zusammen
ich verstehe die ausgabe von smartctl [1] nicht. ich dachte RAW_VALUE ist der
aktuelle wert. gibt eine platte langsam den geist auf werden reserven
sektoren vergeben (Reallocated_Sector_Ct). ist der wert ungleich 0 sollte man
aufpassen, dachte ich. aber 8589934592000 reserve sektoren hat meine platte
wohl kaum. VALUE ist immer noch 100 und auch WORST ist noch 100. wobei wohl
bei Reallocated_Sector_Ct VALUE immer gleich WORST ist oder? zumindest wenn
ich [0] richtig verstanden habe und das dort auch stimmt.
gruss
thomas
[0]
http://www.pclinuxos.de/wiki2/index.php?title=Festplattendiagnose
[1]
thinkix:/home/thomas# smartctl --all /dev/hda
smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Fujitsu MHTxxxxAH family
Device Model: FUJITSU MHT2080AH
Serial Number: NP0KT53272PM
Firmware Version: 8471
User Capacity: 80'026'361'856 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: ATA/ATAPI-6 T13 1410D revision 3a
Local Time is: Fri Aug 17 19:20:36 2007 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection:
Disabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 587) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 80) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 046 Pre-fail
Always - 147175
2 Throughput_Performance 0x0005 100 100 030 Pre-fail
Offline - 23855104
3 Spin_Up_Time 0x0003 100 100 025 Pre-fail
Always - 1
4 Start_Stop_Count 0x0032 087 087 000 Old_age
Always - 64548
5 Reallocated_Sector_Ct 0x0033 100 100 024 Pre-fail
Always - 8589934592000
7 Seek_Error_Rate 0x000f 100 100 047 Pre-fail
Always - 1151
8 Seek_Time_Performance 0x0005 100 100 019 Pre-fail
Offline - 0
9 Power_On_Seconds 0x0032 090 090 000 Old_age
Always - 5025h+53m+55s
10 Spin_Retry_Count 0x0013 100 100 020 Pre-fail
Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age
Always - 2916
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age
Always - 59
193 Load_Cycle_Count 0x0032 088 088 000 Old_age
Always - 120735
194 Temperature_Celsius 0x0022 100 100 000 Old_age
Always - 41 (Lifetime Min/Max 12/55)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age
Always - 3274
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age
Always - 286785536
197 Current_Pending_Sector 0x0012 100 100 000 Old_age
Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age
Always - 0
200 Multi_Zone_Error_Rate 0x000f 100 100 060 Pre-fail
Always - 30278
203 Run_Out_Cancel 0x0002 100 100 000 Old_age
Always - 2632790572163
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed without error 00% 5025 -
# 2 Short offline Completed without error 00% 4554 -
# 3 Short offline Completed without error 00% 4026 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Reply to: