On Wed, Aug 15, 2007 at 01:59:28PM +0200, Sven Hartge wrote: > Stefan Bauer <stefan.bauer@plzk.de> wrote: > > Paul Puschmann schrieb: > > >> Nichts. D.h. mit laufendem wpa_supplicant: no scan results, und ohne > >> wpa_supplicant: > >> ath0 Interface doesn't support scanning : Network is down > > > Sicher, dass das interface ath0 up ist? Sprich es muss auch ne > > IP-Adresse haben. Das ist Voraussetzung für wpa_supplicant. > > Nein. Du brauchst ja den wpa_supplicant, damit die unterste Netzebene > authentifiziert wird, damit dann z.B. der dhcpcd (oder die statische IP) > überhaupt arbyten kann. > > For the record: eine Atheros-basierte WLAN-Karte funktioniert bei mir > unter Debian Sid ausgezeichnet mit wpa_supplicant. > > Sieht in /etc/network/interfaces so aus: > > ,---- > | iface ath0 inet dhcp > | wpa-driver madwifi > | wpa-conf /etc/wpa_supplicant.conf > `---- > > Und die wpa_supplicant.conf beinhaltet dann z.B. > > ,---- > | network={ > | ssid="NETZ" > | scan_ssid=1 > | proto=WPA2 > | key_mgmt=WPA-EAP > | eap=PEAP > | phase2="auth=MSCHAPV2" > | identity="mein_username" > | password="mein_passwort" > | priority=10 > | } > `---- Okay. Sieht so weit ähnlich aus. Unterschiede zu meiner Konfig: WPA-EAP statt WPA-PSK und WPA2 statt WPA Weiter als Associating komme ich nicht. Es wäre natürlich klasse, wenn meine Fritz!Box WPA-EAP könnte... Paul --
Attachment:
signature.asc
Description: Digital signature