Ati und fglrx: Wechsel zwischen Konsole und X-Display immer noch buggy?
Hi liebe Debianer,
seit geraumer Zeit benutze ich den proprietären Treiber fglrx von ATI für die
3D-Beschleunigung.
Mittlerweile gibt es bei mir keine Problem bezgl. Suspend2disk/ram,
jedoch habe ich immer noch das Problem, dass ein Switchen zwischen Konsole und
X-Display manchmal zum System-Aufhang führt, was sehr nervend ist.
Angeblich soll das seit 8.25-18 ja gelöst sein:
----%<-------------------
New Features in 8.25-18 release
Xorg 7.0 Support
Display Power Management Signaling Support
New Product Support of the following ATI Workstation products:
FireGL™ V7350; FireGL™ V7300; FireGL™ V7200
FireGL™ V5200; FireGL™ V3400; FireGL™ V3300
FireMV™ 2200 (Single card configuration)
Running two X servers simultaneously no longer results in the system failing
to respond. Further details can be found in topic number 737-220
X Server no longer fails to load when using an ATI Radeon® X1x00, 512MB
product with certain motherboards. Further details can be found in topic
number 737-22056
Toggling between console mode and X Server graphical mode no longer results in
a system hang. Further details can be found in topic number 737-22058
----%<------------------------
jedoch tritt bei mir immer noch dieses Problem auf, trotz Versionen 8.[15-17].*
Hat jemand ähnliche Erfahrung gemacht bzw. weiß Rat, wie man diese
System-Hangups vermeiden kann? (xorg.conf habe ich angehängt)
Viele Grüße
André
# xorg.conf (Xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands as root:
#
# cp /etc/X11/xorg.conf /etc/X11/xorg.conf.custom
# md5sum /etc/X11/xorg.conf >/var/lib/xfree86/xorg.conf.md5sum
# dpkg-reconfigure xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Generic Keyboard" "CoreKeyboard"
InputDevice "Configured Mouse" "CorePointer"
InputDevice "Synaptics Touchpad" "SendCoreEvents"
Option "AllowMouseOpenFail" "true"
EndSection
Section "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "type1"
Load "v4l"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "acpi"
Option "XkbLayout" "de"
Option "XkbVariant" "nodeadkeys"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ButtonNumber" "5"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Emulate3Buttons" "on"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "Standardbildschirm"
DisplaySize 300 230
HorizSync 30.0 - 80.0
VertRefresh 58.0 - 70.0
Option "DPMS"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
DisplaySize 300 230
HorizSync 30.0 - 80.0
VertRefresh 58.0 - 70.0
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "ATI Technologies, Inc. RV350 [Mobility Radeon 9600 M10]"
Driver "ati"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
BusID "PCI:1:0:0"
# Option "UseInternalAGPGART" "yes"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. RV350 [Mobility Radeon 9600 M10]"
Monitor "Standardbildschirm"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1400x1050" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1400x1050" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1400x1050" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1400x1050" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1400x1050" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1400x1050" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1400x1050" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 1
Modes "1400x1050" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1400x1050" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1400x1050" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1400x1050" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1400x1050" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1400x1050" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
#Section "Extensions"
# Option "Composite" "True"
#EndSection
Reply to: