[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Network controller [0280]: Broadcom Corporation BCM4312



Le 20/01/2016 11:55, Benoit B a écrit :
> Bonjour,
>
> Je voudrais faire fonctionner ma carte wifi.
> Voici le message
>
> dmesg | grep b43
> [   20.073281] b43-phy0: Broadcom 4312 WLAN found (core revision 15)
> [   20.104026] b43-phy0: Found PHY: Analog 6, Type 5 (LP), Revision 1
> [   20.104039] b43-phy0 warning: 5 GHz band is unsupported on this PHY
> [   20.118484] b43 ssb0:0: firmware: failed to load b43/ucode15.fw (-2)
> [   20.118489] b43 ssb0:0: Direct firmware load failed with error -2
> [   20.118491] b43 ssb0:0: Falling back to user helper
> [   20.119405] b43 ssb0:0: firmware: failed to load b43/ucode15.fw (-2)
> [   20.119408] b43 ssb0:0: Direct firmware load failed with error -2
> [   20.119410] b43 ssb0:0: Falling back to user helper
> [   20.120479] b43 ssb0:0: firmware: failed to load b43-open/ucode15.fw (-2)
> [   20.120483] b43 ssb0:0: Direct firmware load failed with error -2
> [   20.120485] b43 ssb0:0: Falling back to user helper
> [   20.120986] b43 ssb0:0: firmware: failed to load b43-open/ucode15.fw (-2)
> [   20.120990] b43 ssb0:0: Direct firmware load failed with error -2
> [   20.120991] b43 ssb0:0: Falling back to user helper
> [   20.121706] b43-phy0 ERROR: You must go to
> http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and
> download the correct firmware for this driver version. Please
> carefully read all instructions on this website.
>
> Où les instructions ?
>
> Une recherche me mène ici
> https://wiki.debian.org/bcm43xx#b43-b43legacy
> For devices with a BCM4312 LP-PHY chip (PCI ID 14E4:4315), install
> firmware-b43-lpphy-installer:
>
> Mais pas de version stable(jessie) ?
>
> Quelqu'un a une idée ?
>
> Merci d'avance.
>
> --
> Benoit
>
Bonjour,

Peut-être dans le paquet firmware-b43-installer
Voir est ici :
https://packages.debian.org/jessie/firmware-b43-installer

[...]

BCM4312 (with Low-Power a.k.a. LP-PHY).
[...]



Reply to: