Sylvain Sauvage a écrit :
Voici mon lilo.conf en pièce jointe.Arnaud Feltz, samedi 2 décembre 2006, 12:34:24 CETBonsoir à tous,^^^^^^^ (à midi ?!) 'jour,J'aurai aimé savoir comment faire pour installer Lilo à la place de grub ( que j'utilise actuellement ) : Pour l'instant j'ai fais: # apt-get install lilo lilo-config # liloconfig puis : # lilo Warning: Unable to determine video adapter in use in the present system. Adding Linux* Adding Windows Lorsque je reboot, je suis toujours sur Grub, j'ai fais quelques recherches sur Internet sans rien trouver de concluant. Quelqu'un aurait-il saurait-il comment procéder ?Envoie ton lilo.conf. Merci |
# Generated by liloconfig # This allows booting from any partition on disks with more than 1024 # cylinders. lba32 # Specifies the boot device boot=/dev/hda4 # Specifies the device that should be mounted as root. # If the special name CURRENT is used, the root device is set to the # device on which the root file system is currently mounted. If the root # has been changed with -r , the respective device is used. If the # variable ROOT is omitted, the root device setting contained in the # kernel image is used. It can be changed with the rdev program. root=/dev/hda4 # Bitmap configuration for /boot/sarge.bmp bitmap=/boot/sarge.bmp bmp-colors=1,,0,2,,0 bmp-table=120p,173p,1,15,17 bmp-timer=254p,432p,1,0,0 # Enables map compaction: # Tries to merge read requests for adjacent sectors into a single # read request. This drastically reduces load time and keeps the map # smaller. Using COMPACT is especially recommended when booting from a # floppy disk. # compact # Install the specified file as the new boot sector. # LILO supports built in boot sectory, you only need # to specify the type, choose one from 'text', 'menu' or 'bitmap'. # new: install=bmp old: install=/boot/boot-bmp.b # new: install=text old: install=/boot/boot-text.b # new: install=menu old: install=/boot/boot-menu.b or boot.b # default: 'menu' is default, unless you have a bitmap= line # Note: install=bmp must be used to see the bitmap menu. # install=menu install=bmp # Specifies the number of _tenths_ of a second LILO should # wait before booting the first image. LILO # doesn't wait if DELAY is omitted or if DELAY is set to zero. # delay=20 # Prompt to use certaing image. If prompt is specified without timeout, # boot will not take place unless you hit RETURN prompt timeout=50 # Specifies the location of the map file. If MAP is # omitted, a file /boot/map is used. map=/boot/map # Specifies the VGA text mode that should be selected when # booting. The following values are recognized (case is ignored): # NORMAL select normal 80x25 text mode. # EXTENDED select 80x50 text mode. The word EXTENDED can be # abbreviated to EXT. # ASK stop and ask for user input (at boot time). # <number> use the corresponding text mode. A list of available modes # can be obtained by booting with vga=ask and pressing [Enter]. vga=normal # Defines non-standard parameters for the specified disk. #disk=/dev/sda # bios=0x80 # If you are using removable USB drivers (with mass-storage) # you will need to tell LILO to not use these devices even # if defined in /etc/fstab and referenced in /proc/partitions. # Adjust these lines to your devices: # # disk=/dev/sda inaccessible # disk=/dev/sdb inaccessible # These images were automagically added. You may need to edit something. image=/boot/vmlinuz-2.6.18.1 label="Lin img0" read-only # If you have another OS on this machine (say DOS), # you can boot if by uncommenting the following lines # (Of course, change /dev/hda2 to wherever your DOS partition is.) # other=/dev/hda2 # label="MS Windows"