PC instable
Salut,
Depuis plusieurs jours mon PC est instable et l'ecran se freeze
Le démarage à froid m'oblige à 3 a 5 reboot à chaud avant d'arriver sur gdm
Il bloque un peu moins lorsqu'il est démarré ( 1 a 2 plantage par jour)
J'ai changé le disque dur et l'alimentation suite à ces problemes
d'instabilités mais cela n'y fait rien
J'utilise le noyau 2.4.27-1-386 avec reglage de la carte Nvidia proprietaire
il y a beaucoup d'erreur dans dmesg ( voir + bas)
Les plantages au démarage sont alléatoire mais se situe généralement à
ces niveaux :
après la reconnaissance de la carte scsi
avant le chargement des modules
avant le chargement des drivers USB
Ma question est ce un prob Hard ou soft ?
Si quelqu'un a une piste
Merci
voici le contenu de dmesg :
0 0 1 1 59
08 001 01 0 0 0 0 0 1 1 61
09 001 01 0 0 0 0 0 1 1 69
0a 001 01 1 1 0 1 0 1 1 71
0b 000 00 1 0 0 0 0 0 0 00
0c 001 01 0 0 0 0 0 1 1 79
0d 001 01 0 0 0 0 0 1 1 81
0e 001 01 0 0 0 0 0 1 1 89
0f 001 01 0 0 0 0 0 1 1 91
10 001 01 1 1 0 1 0 1 1 99
11 001 01 1 1 0 1 0 1 1 A1
12 001 01 1 1 0 1 0 1 1 A9
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1399.2652 MHz.
..... host bus clock speed is 266.5267 MHz.
cpu: 0, clocks: 2665267, slice: 1332633
CPU0<T0:2665264,T1:1332624,D:7,S:1332633,C:2665267>
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
PCI: PCI BIOS revision 2.10 entry at 0xfdb21, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router default [1106/3074] at 00:11.0
PCI->APIC IRQ transform: (B0,I6,P0) -> 17
PCI->APIC IRQ transform: (B0,I7,P0) -> 18
PCI->APIC IRQ transform: (B0,I17,P3) -> 3
PCI->APIC IRQ transform: (B0,I17,P3) -> 3
PCI->APIC IRQ transform: (B0,I17,P2) -> 10
PCI->APIC IRQ transform: (B1,I0,P0) -> 16
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI enabled
COMX: driver version 0.85 (C) 1995-1999 ITConsult-Pro Co. <info@itc.hu>
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 3804 blocks [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/done.
Freeing initrd memory: 3804k freed
VFS: Mounted root (cramfs filesystem).
Freeing unused kernel memory: 96k freed
vesafb: framebuffer at 0xd8000000, mapped to 0xe0822000, size 3072k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c000:ede0
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide: late registration of driver.
VP_IDE: IDE controller at PCI slot 00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8233 (rev 00) IDE UDMA100 controller on pci00:11.1
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:DMA
hda: ST380011A, ATA DISK drive
hdb: QUANTUM FIREBALLlct15 07, ATA DISK drive
blk: queue e0b3bb60, I/O limit 4095Mb (mask 0xffffffff)
blk: queue e0b3bc9c, I/O limit 4095Mb (mask 0xffffffff)
hdd: DVD-ROM DDU1621, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=9729/255/63,
UDMA(100)
hdb: attached ide-disk driver.
hdb: 14668290 sectors (7510 MB) w/418KiB Cache, CHS=15522/15/63, UDMA(66)
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
/dev/ide/host0/bus0/target1/lun0: [PTBL] [913/255/63] p1 p2 p3 p4
Journalled Block Device driver loaded
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding Swap: 995988k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,4), internal journal
Real Time Clock Driver v1.10f
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 19:47:10 Dec 1 2004
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xe000, IRQ 3
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: USB UHCI at I/O 0xdc00, IRQ 3
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usb.c: registered new driver usbkbd
usbkbd.c: :USB HID Boot Protocol keyboard driver
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
See Documentation/networking/vortex.txt
00:06.0: 3Com PCI 3c905 Boomerang 100baseTx at 0xe800. Vers LK1.1.18-ac
00:60:08:2c:f8:de, IRQ 17
product code 4b4b rev 00.0 date 01-12-96
Internal config register is 16302d8, transceivers 0xe040.
8K word-wide RAM 3:5 Rx:Tx split, autoselect/MII interface.
MII transceiver found at address 24, status 786f.
Enabling bus-master transmits and whole-frame receives.
00:06.0: scatter/gather enabled. h/w checksums disabled
eth0: Dropping NETIF_F_SG since no checksum feature.
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected Via Apollo Pro KT266 chipset
agpgart: AGP aperture is 128M @ 0xe0000000
hub.c: new USB device 00:11.2-1, assigned address 2
hub.c: USB hub found
hub.c: 4 ports detected
Via 686a/8233/8235 audio driver 1.9.1-ac3
via82cxxx: Six channel audio available
PCI: Setting latency timer of device 00:11.5 to 64
ac97_codec: AC97 Audio codec, id: ALG16 (ALC200/200P)
via82cxxx: board #1 at 0xE400, IRQ 10
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-6111 Tue Jul
27 07:55:38 PDT 2004
uhci.c: USB Universal Host Controller Interface driver v1.1
irda_init()
SCSI subsystem driver Revision: 1.00
DC390: 1 adapters found
scsi0 : Tekram DC390/AM53C974 V2.0f 2000-12-20
Vendor: YAMAHA Model: CRW4260 Rev: 1.0h
Type: CD-ROM ANSI SCSI revision: 02
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.MDET]
(Node dfc34a00), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0._CRS]
(Node dfc34ac0), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0._CRS]
(Node dfc34ac0), AE_NOT_EXIST
shpchp: acpi_shpchprm:\_SB_.PCI0 _CRS fail=0x6
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _CRS fail=0x6
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.ENFG]
(Node c15896c0), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPT_._STA]
(Node c1589be0), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPT_._STA]
(Node c1589be0), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.ENFG]
(Node c15896c0), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.ECP_._STA]
(Node c1589cc0), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.ECP_._STA]
(Node c1589cc0), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.ENFG]
(Node c15896c0), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.GAME._STA]
(Node c1589da0), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.GAME._STA]
(Node c1589da0), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.ENFG]
(Node c15896c0), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.MIDI._STA]
(Node c1589e80), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.MIDI._STA]
(Node c1589e80), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed
[\_SB_.PCI0.SBRG.PS2M._STA] (Node dfc2e7a0), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed
[\_SB_.PCI0.SBRG.PS2M._STA] (Node dfc2e7a0), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed
[\_SB_.PCI0.SBRG.PS2K._STA] (Node dfc2e880), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed
[\_SB_.PCI0.SBRG.PS2K._STA] (Node dfc2e880), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.USB2._STA]
(Node dfc2c460), AE_AML_NO_RETURN_VALUE
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.USB2._STA]
(Node dfc2c460), AE_AML_NO_RETURN_VALUE
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.ILAN._STA]
(Node dfc2c620), AE_AML_NO_RETURN_VALUE
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.ILAN._STA]
(Node dfc2c620), AE_AML_NO_RETURN_VALUE
ACPI-1133: *** Error: Method execution failed [\_SB_.LNKA._STA]
(Node dfc2fde0), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed [\_SB_.LNKA._STA]
(Node dfc2fde0), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.LNKB._STA]
(Node dfc2fee0), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed [\_SB_.LNKB._STA]
(Node dfc2fee0), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.LNKC._STA]
(Node dfc2ffe0), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed [\_SB_.LNKC._STA]
(Node dfc2ffe0), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.LNKD._STA]
(Node dfc2e2c0), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed [\_SB_.LNKD._STA]
(Node dfc2e2c0), AE_NOT_EXIST
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.MDET]
(Node dfc34a00), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0._CRS]
(Node dfc34ac0), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0._CRS]
(Node dfc34ac0), AE_NOT_EXIST
pciehp: acpi_pciehprm:\_SB_.PCI0 _CRS fail=0x6
pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _CRS fail=0x6
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.ENFG]
(Node c15896c0), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPT_._STA]
(Node c1589be0), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.LPT_._STA]
(Node c1589be0), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.ENFG]
(Node c15896c0), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.ECP_._STA]
(Node c1589cc0), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.ECP_._STA]
(Node c1589cc0), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.ENFG]
(Node c15896c0), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.GAME._STA]
(Node c1589da0), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.GAME._STA]
(Node c1589da0), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.ENFG]
(Node c15896c0), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.MIDI._STA]
(Node c1589e80), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.MIDI._STA]
(Node c1589e80), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed
[\_SB_.PCI0.SBRG.PS2M._STA] (Node dfc2e7a0), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed
[\_SB_.PCI0.SBRG.PS2M._STA] (Node dfc2e7a0), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed
[\_SB_.PCI0.SBRG.PS2K._STA] (Node dfc2e880), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed
[\_SB_.PCI0.SBRG.PS2K._STA] (Node dfc2e880), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.USB2._STA]
(Node dfc2c460), AE_AML_NO_RETURN_VALUE
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.USB2._STA]
(Node dfc2c460), AE_AML_NO_RETURN_VALUE
ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.ILAN._STA]
(Node dfc2c620), AE_AML_NO_RETURN_VALUE
ACPI-0154: *** Error: Method execution failed [\_SB_.PCI0.ILAN._STA]
(Node dfc2c620), AE_AML_NO_RETURN_VALUE
ACPI-1133: *** Error: Method execution failed [\_SB_.LNKA._STA]
(Node dfc2fde0), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed [\_SB_.LNKA._STA]
(Node dfc2fde0), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.LNKB._STA]
(Node dfc2fee0), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed [\_SB_.LNKB._STA]
(Node dfc2fee0), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.LNKC._STA]
(Node dfc2ffe0), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed [\_SB_.LNKC._STA]
(Node dfc2ffe0), AE_NOT_EXIST
ACPI-1133: *** Error: Method execution failed [\_SB_.LNKD._STA]
(Node dfc2e2c0), AE_NOT_EXIST
ACPI-0154: *** Error: Method execution failed [\_SB_.LNKD._STA]
(Node dfc2e2c0), AE_NOT_EXIST
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
ttyS0: LSR safety check engaged!
ttyS0: LSR safety check engaged!
ttyS1: LSR safety check engaged!
ttyS1: LSR safety check engaged!
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
lp0: using parport0 (polling).
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
apm: driver version: No APM present
NVRM: AGPGART: unable to set MTRR write-combining
NVRM: not using NVAGP, AGPGART is loaded!!
NVRM: AGPGART: unable to set MTRR write-combining
NVRM: not using NVAGP, AGPGART is loaded!!
via_audio: ignoring drain playback error -11
via_audio: ignoring drain playback error -11
via_audio: ignoring drain playback error -11
via_audio: ignoring drain playback error -11
via_audio: ignoring drain playback error -11
via_audio: ignoring drain playback error -11
voici ce que me donne lspci -vv
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo
KT266/A/333]
Subsystem: VIA Technologies, Inc.: Unknown device 0000
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [a0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo
KT266/A/333 AGP] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: dde00000-dfefffff
Prefetchable memory behind bridge: d5b00000-ddcfffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:06.0 Ethernet controller: 3Com Corporation 3c905 100BaseTX
[Boomerang]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 224 (750ns min, 2000ns max)
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at e800 [size=64]
Expansion ROM at dffe0000 [disabled] [size=64K]
0000:00:07.0 SCSI storage controller: Advanced Micro Devices [AMD]
53c974 [PCscsi] (rev 10)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping+ SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 224 (1000ns min, 10000ns max)
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at ec00 [size=128]
Expansion ROM at dfff0000 [disabled] [size=64K]
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge
Subsystem: VIA Technologies, Inc.: Unknown device 0000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:11.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
(prog-if 8a [Master SecP PriP])
Subsystem: VIA Technologies, Inc.
VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at fc00 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:11.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 1b) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 224, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin D routed to IRQ 3
Region 4: I/O ports at dc00 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:11.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 1b) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 224, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin D routed to IRQ 3
Region 4: I/O ports at e000 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller (rev 10)
Subsystem: Avance Logic Inc.: Unknown device 4710
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 10
Region 0: I/O ports at e400 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:01:00.0 VGA compatible controller: nVidia Corporation NV17
[GeForce4 MX 420] (rev a3) (prog-if 00 [VGA])
Subsystem: Micro-Star International Co., Ltd.: Unknown device 8783
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at de000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d8000000 (32-bit, prefetchable) [size=64M]
Region 2: Memory at ddc80000 (32-bit, prefetchable) [size=512K]
Expansion ROM at dfee0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- HTrans-
64bit- FW+ AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
voici ce que me donne lsmod
Module Size Used by Tainted: P
apm 8428 0 (autoclean)
nfsd 62288 8 (autoclean)
lockd 41584 1 (autoclean) [nfsd]
sunrpc 58528 1 (autoclean) [nfsd lockd]
parport_pc 19432 1 (autoclean)
lp 5540 0
parport 21608 1 [parport_pc lp]
af_packet 11048 1 (autoclean)
tmscsim 26993 0 (unused)
scsi_mod 86052 1 [tmscsim]
nvidia 4587212 6
via82cxxx_audio 17404 0
ac97_codec 11252 0 [via82cxxx_audio]
uart401 5860 0 [via82cxxx_audio]
sound 48872 0 [via82cxxx_audio uart401]
soundcore 3268 4 [via82cxxx_audio sound]
agpgart 39108 0
3c59x 23312 1
keybdev 1732 0 (unused)
usbkbd 2712 0 (unused)
input 3040 0 [keybdev usbkbd]
usb-uhci 19504 0 (unused)
usbcore 52268 1 [usbkbd usb-uhci]
rtc 5768 0 (autoclean)
ext3 65388 3 (autoclean)
jbd 34628 3 (autoclean) [ext3]
ide-detect 288 0 (autoclean) (unused)
via82cxxx 9256 1 (autoclean)
ide-disk 12448 4 (autoclean)
ide-core 91832 4 (autoclean) [ide-detect via82cxxx
ide-disk]
unix 12720 197 (autoclean)
vesafb 8520 63 (autoclean)
fbcon-cfb24 4040 0 (autoclean) [vesafb]
fbcon-cfb8 3176 0 (autoclean) [vesafb]
fbcon-cfb32 3656 0 (autoclean) [vesafb]
fbcon-cfb16 3752 0 (autoclean) [vesafb]
Reply to: