Re: problème de gestion de 2 écran

To: debian user fr <debian-user-french@lists.debian.org>
Subject: Re: problème de gestion de 2 écran
From: "C. Mourad Jaber" <ml-count@lundarael.dyndns.org>
Date: 19 Dec 2002 18:10:23 +0100
Message-id: <[🔎] 1040317824.2563.10.camel@cp_mc>
In-reply-to: <[🔎] 3E01F18B.9010406@ecl2005.ec-lyon.fr>
References: <[🔎] 1040312189.2563.3.camel@cp_mc> <[🔎] 3E01F18B.9010406@ecl2005.ec-lyon.fr>

Oui, elle fonctionnent séparément, j'ai même essayé le Xinerama, le problème est surtout que je n'arrive pas à faire dépasser le 60hz au ecrans ce qui est trés désagréable pour travailler dessus toute le journée !
ci-joint mon fichier de conf.
Merci
@ +

Le jeu 19/12/2002 à 17:19, Sébastien Soudan a écrit :

Mourad Jaber wrote:
> Bonjour, 
> J'essaie désespérément de configurer 2 écran sur 2 carte video
> différentes. 
> J'ai essayé de configurer manuellement le modeline mais cela ne semble
> pas fonctionner... 
> les 2 écran sont du même type et avant de les monter sur la même
> machine, ils fonctionnait trés bien à 75 hz en 1152x768 ( désolé pour la
> résolution un peu batarde...). 
> Les cartes video son une ATI mach64 8Mo AGP et l'autre une Cirrus Logic
> GD5465 4 ou 8 Mo. 
> Le serveur X est un 4.2.0 
> Quelqu'un pourrait me donner des indices ? 
> Merci 
> 
> 
> 
> 
> 

Bonjour,

quelques questions avant de commencer :

est-ce que vos cartes marchent séparément ?

si oui je joins à ce mail mon fichier de config pour X qu'il faudra 
adapter mais il marche avec mes cartes (GeForce 3 -> driver nvidia, SIS 
6326 8Mo -> driver vesa.)


Sébastien Soudan

# File generated by XFdrake.

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************

Section "Files"

    RgbPath	"/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.

    FontPath   "unix/:-1"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

    # Uncomment this to cause a core dump at the spot where a signal is
    # received.  This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    #NoTrapSignals

    # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    #DontZap

    # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
    # sequences.  This allows clients to receive these key events.
    #DontZoom

    # This  allows  the  server  to start up even if the
    # mouse device can't be opened/initialised.
    AllowMouseOpenFail

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Keyboard section
# **********************************************************************

Section "InputDevice"

    Identifier "Keyboard1"
    Driver      "Keyboard"
    Option "AutoRepeat"  "250 30"

    Option "XkbRules" "xfree86"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "fr"

EndSection

# **********************************************************************
# Pointer section
# **********************************************************************

Section "InputDevice"

    Identifier  "Mouse1"
    Driver      "mouse"
    Option "Protocol"    "IMPS/2"
    Option "Device"      "/dev/psaux"
    Option "ZAxisMapping" "4 5"
#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection



Section "Module"

# This loads the DBE extension module.
    Load	"dbe"

# This loads the Video for Linux module.
    Load        "v4l"


# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.

    SubSection	"extmod"
	#Option	"omit xfree86-dga"
    EndSubSection

# This loads the Type1 and FreeType font modules

    Load	"type1"
    Load	"freetype"
EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"
    Identifier "AOC|AOC SPECTRUM 7Vlr & 7VlrA & 7Vlr+ & 7VlrA+ 1"
    VendorName "AOC"
    ModelName  "Unknown"


# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
    HorizSync  30.0-70.0


# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
    VertRefresh 50.0-130.0


# This is a set of extended mode timings typically used for laptop,
# TV fullscreen mode or DVD fullscreen output.
# These are available along with standard mode timings.

# Sony Vaio C1(X,XS,VE,VN)?
# 1024x480 @ 85.6 Hz, 48 kHz hsync
Modeline "1024x768"	70.00 1152 1464 1592 1776  864  864  876  908 -hsync -vsync
#ModeLine "1152x768"    106.73 1152 1200 1440 1536   768  770  782  808
#ModeLine "1024x480"    65.00 1024 1032 1176 1344   480  488  494  563 -hsync -vsync

# 768x576 @ 79 Hz, 50 kHz hsync
#ModeLine "768x576"     50.00  768  832  846 1000   576  590  595  630
# 768x576 @ 100 Hz, 61.6 kHz hsync
#ModeLine "768x576"     63.07  768  800  960 1024   576  578  590  616


EndSection


Section "Monitor"
    Identifier "AOC|AOC SPECTRUM 7Vlr & 7VlrA & 7Vlr+ & 7VlrA+ 2"
    VendorName "AOC"
    ModelName  "Unknown"


# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
    HorizSync  30.0-70.0


# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
    VertRefresh 50.0-130.0


# This is a set of extended mode timings typically used for laptop,
# TV fullscreen mode or DVD fullscreen output.
# These are available along with standard mode timings.

# Sony Vaio C1(X,XS,VE,VN)?
# 1024x480 @ 85.6 Hz, 48 kHz hsync
Modeline "1024x768"	72.00 1024 1032 1176 1344  768  864  876  908 -hsync -vsync
#ModeLine "1152x768"    106.73 1152 1200 1440 1536   768  770  782  808
#ModeLine "1024x480"    65.00 1024 1032 1176 1344   480  488  494  563 -hsync -vsync

# 768x576 @ 79 Hz, 50 kHz hsync
#ModeLine "768x576"     50.00  768  832  846 1000   576  590  595  630
# 768x576 @ 100 Hz, 61.6 kHz hsync
#ModeLine "768x576"     63.07  768  800  960 1024   576  578  590  616


EndSection



# **********************************************************************
# Graphics device section
# **********************************************************************

Section "Device"
    Identifier "Generic VGA"
    Driver     "vga"
EndSection

Section "Device"
    Identifier  "Cirrus Logic GD5465 2"
    VendorName  ""
    BoardName   ""
    Driver      "cirrus"
    # Clock lines


    # Uncomment following option if you see a big white block        
    # instead of the cursor!                                          
    #    Option      "sw_cursor"

    Option      "DPMS"  "on"
    BusID       "PCI:0:11:0"
EndSection


Section "Device"
    Identifier  "ATI Mach64 1"
    VendorName  ""
    BoardName   ""
    Driver      "ati"
    # Clock lines


    # Uncomment following option if you see a big white block        
    # instead of the cursor!                                          
    #    Option      "sw_cursor"

    Option      "DPMS"  "on"
    BusID       "PCI:1:0:0"
EndSection



# **********************************************************************
# Screen sections
# **********************************************************************


Section "Screen"
    Identifier "screen2"
    Device      "Cirrus Logic GD5465 2"
    Monitor     "AOC|AOC SPECTRUM 7Vlr & 7VlrA & 7Vlr+ & 7VlrA+ 2"
    DefaultColorDepth 24
    Subsection "Display"
        Depth       8
        Modes       "1280x1024" "1152x768" "1024x768" "800x600" "640x400"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       15
        Modes       "1280x1024" "1152x768" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "1280x1024" "1152x768" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1280x1024" "1152x768" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       32
        Modes       "1280x1024" "1152x768" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
EndSection

Section "Screen"
    Identifier "screen1"
    Device      "ATI Mach64 1"
    Monitor     "AOC|AOC SPECTRUM 7Vlr & 7VlrA & 7Vlr+ & 7VlrA+ 2"
    DefaultColorDepth 24
    Subsection "Display"
        Depth       8
        Modes       "1280x1024" "1152x768" "1024x768" "800x600" "640x400"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       15
        Modes       "1280x1024" "1152x768" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "1280x1024" "1152x768" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1280x1024" "1152x768" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       32
        Modes       "1280x1024" "1152x768" "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
EndSection


Section "ServerLayout"
    Identifier "layout1"
    Screen     "screen1"
    Screen     "screen2" RightOf "screen1"
#    Option     "Xinerama" "on"

    InputDevice "Mouse1" "CorePointer"

    InputDevice "Keyboard1" "CoreKeyboard"
EndSection

Reply to:

Follow-Ups:
- Re: problème de gestion de 2 écran
  - From: Antoine Schweitzer-Chaput <Antoine.Schweitzer-Chaput@supelec.fr>

References:
- problème de gestion de 2 écran
  - From: Mourad Jaber <mjaber@centralpay.net>
- Re: problème de gestion de 2 écran
  - From: Sébastien Soudan <Sebastien.Soudan@ecl2005.ec-lyon.fr>

Prev by Date: Re: ssh et sshd en cul-de-sac
Next by Date: tty12 pour les logs. II
Previous by thread: Re: problème de gestion de 2 écran
Next by thread: Re: problème de gestion de 2 écran
Index(es):
- Date
- Thread