"unresolved symbol" in XFree86 4.0.3
I have i810 video, and just upgraded to XFree86 4.0.3 (xserver-xfree86
4.0.3-4) but it's not working.
1) startx fails, with these messages:
Symbol VBEInit from module /usr/X11R6/lib/modules/drivers/i810_drv.o is unresolved!
Symbol vbeDoEDID from module /usr/X11R6/lib/modules/drivers/i810_drv.o is unresolved!
Those modules came with xserver-xfree86. I see all the servers in
that directory require those two symbols. Where are they supposed to
be defined? e.g. they are not defined anywhere in the Linux kernel
sources.
2) I was asked several configuration questions when I installed
xserver-xfree86. However, the configuration file
/etc/X11/XF86Config was not changed from before. I could not find
where the answers to my questions went.
Is this a package bug, an upstream bug, or just misconfiguration here?
I'd appreciate any suggestions.
- Jim Van Zandt
XFree86 Version 4.0.3 / X Window System
(protocol Version 11, revision 0, vendor release 6400)
Release Date: 16 March 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/FAQ)
Operating System: Linux 2.2.19 i686 [ELF]
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Thu Jun 21 15:13:29 2001
(==) Using config file: "/etc/X11/XF86Config"
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (??) unknown.
(WW) No Layout section. Using the first Screen section.
(**) |-->Screen "svga" (0)
(**) | |-->Monitor "NEC XE17 MultiSync"
(**) | |-->Device "i810"
(==) |-->Input Device "Implicit Core Pointer"
(==) |-->Input Device "Implicit Core Keyboard"
(**) Option "Protocol" "Standard"
(**) Option "AutoRepeat" "500 5"
(**) Option "XkbKeymap" "xfree86(us)"
(**) XKB: keymap: "xfree86(us)" (overrides other XKB settings)
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7
(WW) Cannot open APM
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.3
XFree86 XInput driver : 0.1
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.2
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.3
(II) PCI: Probing config type using method 1
...
[16] -1 0x0000ff80 - 0x0000ff9f (0x20) IX[B]
[17] -1 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
(II) LoadModule: "i810"
(II) Loading /usr/X11R6/lib/modules/drivers/i810_drv.o
(II) Module i810: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 1.0.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.3
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.1
(II) I810: Driver for Intel i810 chipset: i810, i810-dc100, i810e, i815
(II) Primary Device is: PCI 00:01:0
(--) Assigning device section with no busID to primary device
(--) Chipset i810e found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
...
[22] 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.3
(**) I810(0): Depth 16, (--) framebuffer bpp 16
(==) I810(0): RGB weight 565
(==) I810(0): Default visual is TrueColor
(--) I810(0): Chipset: "i810e"
(--) I810(0): Linear framebuffer at 0xF4000000
(--) I810(0): IO registers at addr 0xFF000000
(EE) Unable to open /dev/agpgart (No such device)
(==) I810(0): Will alloc AGP framebuffer: 8192 kByte
(==) I810(0): Using gamma correction (1.0, 1.0, 1.0)
(II) I810(0): NEC XE17 MultiSync: Using hsync range of 31.50-64.30 kHz
(II) I810(0): NEC XE17 MultiSync: Using vrefresh range of 55.00-85.00 Hz
(II) I810(0): Clock range: 12.00 to 163.00 MHz
(WW) I810(0): Mode "1024x768" deleted (unknown reason)
...
(WW) I810(0): Default mode "1920x1440" deleted (bad mode clock/interlace/doublescan)
(--) I810(0): Virtual size is 1280x1024 (pitch 2048)
(**) I810(0): Mode "1024x768": 85.0 MHz, 64.2 kHz, 80.3 Hz
(**) I810(0): Mode "1280x1024": 110.0 MHz, 64.3 kHz, 60.7 Hz
(**) I810(0): Mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(**) I810(0): Mode "800x600": 60.8 MHz, 55.8 kHz, 85.0 Hz
(++) I810(0): DPI set to (100, 100)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.0.3, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.3
Symbol VBEInit from module /usr/X11R6/lib/modules/drivers/i810_drv.o is unresolved!
Symbol vbeDoEDID from module /usr/X11R6/lib/modules/drivers/i810_drv.o is unresolved!
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0xff000000 - 0xff07ffff (0x80000) MS[B]
...
[24] 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) I810(0): Write-combining range (0xf4000000,0x2000000)
(II) I810(0): Setting dot clock to 84.9 MHz [ 0x2c 0xb 0x20 ] [ 46 13 2 ]
(II) I810(0): chose watermark 0x22210000: (tab.freq 94.5)
Fatal server error:
AddScreen/ScreenInit failed for driver 0
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to submit@bugs.debian.org.
Reply to: